Remove qstr, sstr and qsv aliases. This does not compile on clang-cl

- The pointer-based nature of write entries, changes invalidate previous data
- Instead of managing scratch, just push to the descriptors built-in management which is quite optimal

.ci/build-freebsd.sh

@@ -1,9 +1,10 @@
 #!/bin/sh -ex
 
-# Pull all the submodules except llvm and opencv
+# Pull all the submodules except some
 # Note: Tried to use git submodule status, but it takes over 20 seconds
 # shellcheck disable=SC2046
-git submodule -q update --init --depth 1 $(awk '/path/ && !/llvm/ && !/opencv/ { print $3 }' .gitmodules)
+git config --global --add safe.directory .
+git submodule -q update --init --depth 1 $(awk '/path/ && !/llvm/ && !/opencv/ && !/libpng/ && !/libsdl-org/ && !/curl/ && !/zlib/ && !/libusb/ { print $3 }' .gitmodules)
 
 CONFIGURE_ARGS="
 	-DWITH_LLVM=ON
@@ -13,6 +14,7 @@ CONFIGURE_ARGS="
 	-DUSE_SYSTEM_FFMPEG=ON
 	-DUSE_SYSTEM_CURL=ON
 	-DUSE_SYSTEM_LIBPNG=ON
+ 	-DUSE_SYSTEM_LIBUSB=ON
 	-DUSE_SYSTEM_OPENCV=ON
 "
 

.ci/build-linux-aarch64.sh

@@ -1,14 +1,14 @@
 #!/bin/sh -ex
 
-if [ -z "$CIRRUS_CI" ]; then
-   cd rpcs3 || exit 1
-fi
+cd rpcs3 || exit 1
+
+shellcheck .ci/*.sh
 
 git config --global --add safe.directory '*'
 
-# Pull all the submodules except llvm and opencv
+# Pull all the submodules except some
 # shellcheck disable=SC2046
-git submodule -q update --init $(awk '/path/ && !/llvm/ && !/opencv/ { print $3 }' .gitmodules)
+git submodule -q update --init $(awk '/path/ && !/llvm/ && !/opencv/ && !/libsdl-org/ && !/curl/ && !/zlib/ { print $3 }' .gitmodules)
 
 mkdir build && cd build || exit 1
 
@@ -22,15 +22,16 @@ else
     export CXX="${CLANGXX_BINARY}"
     export LINKER="${LLD_BINARY}"
 fi
-export CFLAGS="$CFLAGS -fuse-ld=${LINKER}"
-export CXXFLAGS="$CXXFLAGS -fuse-ld=${LINKER}"
+
+export LINKER_FLAG="-fuse-ld=${LINKER}"
 
 cmake ..                                               \
     -DCMAKE_INSTALL_PREFIX=/usr                        \
     -DUSE_NATIVE_INSTRUCTIONS=OFF                      \
     -DUSE_PRECOMPILED_HEADERS=OFF                      \
-    -DCMAKE_C_FLAGS="$CFLAGS"                          \
-    -DCMAKE_CXX_FLAGS="$CFLAGS"                        \
+    -DCMAKE_EXE_LINKER_FLAGS="${LINKER_FLAG}"          \
+    -DCMAKE_MODULE_LINKER_FLAGS="${LINKER_FLAG}"       \
+    -DCMAKE_SHARED_LINKER_FLAGS="${LINKER_FLAG}"       \
     -DUSE_SYSTEM_CURL=ON                               \
     -DUSE_SDL=ON                                       \
     -DUSE_SYSTEM_SDL=ON                                \
@@ -40,19 +41,15 @@ cmake ..                                               \
     -DOpenGL_GL_PREFERENCE=LEGACY                      \
     -DLLVM_DIR=/opt/llvm/lib/cmake/llvm                \
     -DSTATIC_LINK_LLVM=ON                              \
+    -DBUILD_RPCS3_TESTS="${RUN_UNIT_TESTS}"            \
+    -DRUN_RPCS3_TESTS="${RUN_UNIT_TESTS}"              \
     -G Ninja
 
 ninja; build_status=$?;
 
 cd ..
 
-shellcheck .ci/*.sh
-
 # If it compiled succesfully let's deploy.
-# Azure and Cirrus publish PRs as artifacts only.
-{   [ "$CI_HAS_ARTIFACTS" = "true" ];
-} && SHOULD_DEPLOY="true" || SHOULD_DEPLOY="false"
-
-if [ "$build_status" -eq 0 ] && [ "$SHOULD_DEPLOY" = "true" ]; then
+if [ "$build_status" -eq 0 ]; then
     .ci/deploy-linux.sh "aarch64"
 fi

.ci/build-linux.sh

@@ -1,15 +1,15 @@
 #!/bin/sh -ex
 
-if [ -z "$CIRRUS_CI" ]; then
-   cd rpcs3 || exit 1
-fi
+cd rpcs3 || exit 1
+
+shellcheck .ci/*.sh
 
 git config --global --add safe.directory '*'
 
-# Pull all the submodules except llvm and opencv
+# Pull all the submodules except some
 # Note: Tried to use git submodule status, but it takes over 20 seconds
 # shellcheck disable=SC2046
-git submodule -q update --init $(awk '/path/ && !/llvm/ && !/opencv/ { print $3 }' .gitmodules)
+git submodule -q update --init $(awk '/path/ && !/llvm/ && !/opencv/ && !/libsdl-org/ && !/curl/ && !/zlib/ { print $3 }' .gitmodules)
 
 mkdir build && cd build || exit 1
 
@@ -30,7 +30,7 @@ else
     export RANLIB=/usr/bin/llvm-ranlib-"$LLVMVER"
 fi
 
-export CFLAGS="$CFLAGS -fuse-ld=${LINKER}"
+export LINKER_FLAG="-fuse-ld=${LINKER}"
 
 cmake ..                                               \
     -DCMAKE_INSTALL_PREFIX=/usr                        \
@@ -38,6 +38,9 @@ cmake ..                                               \
     -DUSE_PRECOMPILED_HEADERS=OFF                      \
     -DCMAKE_C_FLAGS="$CFLAGS"                          \
     -DCMAKE_CXX_FLAGS="$CFLAGS"                        \
+    -DCMAKE_EXE_LINKER_FLAGS="${LINKER_FLAG}"          \
+    -DCMAKE_MODULE_LINKER_FLAGS="${LINKER_FLAG}"       \
+    -DCMAKE_SHARED_LINKER_FLAGS="${LINKER_FLAG}"       \
     -DCMAKE_AR="$AR"                                   \
     -DCMAKE_RANLIB="$RANLIB"                           \
     -DUSE_SYSTEM_CURL=ON                               \
@@ -49,19 +52,15 @@ cmake ..                                               \
     -DOpenGL_GL_PREFERENCE=LEGACY                      \
     -DLLVM_DIR=/opt/llvm/lib/cmake/llvm                \
     -DSTATIC_LINK_LLVM=ON                              \
+    -DBUILD_RPCS3_TESTS="${RUN_UNIT_TESTS}"            \
+    -DRUN_RPCS3_TESTS="${RUN_UNIT_TESTS}"              \
     -G Ninja
 
 ninja; build_status=$?;
 
 cd ..
 
-shellcheck .ci/*.sh
-
 # If it compiled succesfully let's deploy.
-# Azure and Cirrus publish PRs as artifacts only.
-{   [ "$CI_HAS_ARTIFACTS" = "true" ];
-} && SHOULD_DEPLOY="true" || SHOULD_DEPLOY="false"
-
-if [ "$build_status" -eq 0 ] && [ "$SHOULD_DEPLOY" = "true" ]; then
+if [ "$build_status" -eq 0 ]; then
     .ci/deploy-linux.sh "x86_64"
 fi

.ci/build-mac-arm64.sh

@@ -1,66 +1,26 @@
 #!/bin/sh -ex
 
 # shellcheck disable=SC2086
-brew_arm64_install_packages() {
-    for pkg in "$@"; do
-        echo "Fetching bottle for $pkg (arm64)..."
-        bottle_path="$("$BREW_ARM64_PATH/bin/brew" --cache --bottle-tag=arm64_sonoma "$pkg")"
-        if [ ! -f "$bottle_path" ]; then
-            if ! "$BREW_ARM64_PATH/bin/brew" fetch --force --verbose --debug --bottle-tag=arm64_sonoma "$pkg"; then
-                echo "Failed to fetch bottle for $pkg"
-                return 1
-            fi
-            bottle_path="$("$BREW_ARM64_PATH/bin/brew" --cache --bottle-tag=arm64_sonoma "$pkg")"
-        fi
-
-        echo "Installing $pkg (arm64)..."
-        "$BREW_ARM64_PATH/bin/brew" install --force --force-bottle --ignore-dependencies "$bottle_path" || true
-    done
-}
-
 export HOMEBREW_NO_AUTO_UPDATE=1
 export HOMEBREW_NO_INSTALLED_DEPENDENTS_CHECK=1
+export HOMEBREW_NO_ENV_HINTS=1
 export HOMEBREW_NO_INSTALL_CLEANUP=1
 
-/usr/local/bin/brew update
-sudo rm -rf /usr/local/Cellar/curl /usr/local/opt/curl
-/usr/local/bin/brew install -f --overwrite curl
-/usr/local/bin/brew uninstall -f --ignore-dependencies ffmpeg
-/usr/local/bin/brew install -f --build-from-source ffmpeg@5 || true
-/usr/local/bin/brew install -f --overwrite python || true
-/usr/local/bin/brew link --overwrite python || true
-/usr/local/bin/brew install -f --overwrite nasm ninja p7zip ccache pipenv #create-dmg
-/usr/local/bin/brew link -f curl || true
-/usr/local/bin/brew install llvm@$LLVM_COMPILER_VER glew cmake sdl3 vulkan-headers coreutils
-/usr/local/bin/brew link -f llvm@$LLVM_COMPILER_VER ffmpeg@5 || true
+/opt/homebrew/bin/brew install -f --overwrite --quiet nasm ninja p7zip ccache pipenv gnutls freetype googletest #create-dmg
+/opt/homebrew/bin/brew install -f --quiet ffmpeg@5
+/opt/homebrew/bin/brew install --quiet "llvm@$LLVM_COMPILER_VER" glew cmake sdl3 vulkan-headers coreutils
+/opt/homebrew/bin/brew link -f --quiet "llvm@$LLVM_COMPILER_VER" ffmpeg@5
 
-export BREW_ARM64_PATH="/opt/homebrew1"
-sudo mkdir -p "$BREW_ARM64_PATH"
-sudo chmod 777 "$BREW_ARM64_PATH"
-curl -L https://github.com/Homebrew/brew/tarball/master | tar xz --strip 1 -C "$BREW_ARM64_PATH"
-
-#"$BREW_ARM64_PATH/bin/brew" update
-# libvorbis requires Homebrew-installed curl, but we can't run it on x64, and we also need the aarch64 libs, so we swap the binary
-brew_arm64_install_packages curl
-mv /opt/homebrew1/opt/curl/bin/curl /opt/homebrew1/opt/curl/bin/curl.bak
-ln -s /usr/local/opt/curl/bin/curl /opt/homebrew1/opt/curl/bin/curl
-
-brew_arm64_install_packages 0mq aom aribb24 ca-certificates cjson dav1d ffmpeg@5 fontconfig freetype freetype2 gettext glew gmp gnutls lame libbluray libidn2 libnettle libogg libpng librist libsodium libsoxr libtasn libtasn1 libunistring libvmaf libvorbis libvpx libx11 libxau libxcb libxdmcp llvm@$LLVM_COMPILER_VER mbedtls molten-vk nettle opencore-amr openjpeg openssl opus p11-kit pkg-config pkgconfig pzstd rav1e sdl3 snappy speex srt svt-av1 theora vulkan-headers webp x264 x265 xz z3 zeromq zmq zstd
-"$BREW_ARM64_PATH/bin/brew" link -f ffmpeg@5
-ln -s "/opt/homebrew1/opt/llvm@$LLVM_COMPILER_VER/lib/unwind/libunwind.1.dylib" "/opt/homebrew1/opt/llvm@$LLVM_COMPILER_VER/lib/libunwind.1.dylib"
-
-# moltenvk based on commit for 1.2.11 release
-wget https://raw.githubusercontent.com/Homebrew/homebrew-core/6bfc8950c696d1f952425e8af2a6248603dc0df9/Formula/m/molten-vk.rb
-/usr/local/bin/brew install -f --overwrite ./molten-vk.rb
+# moltenvk based on commit for 1.3.0 release
+wget https://raw.githubusercontent.com/Homebrew/homebrew-core/7255441cbcafabaa8950f67c7ec55ff499dbb2d3/Formula/m/molten-vk.rb
+/opt/homebrew/bin/brew install -f --overwrite --formula --quiet ./molten-vk.rb
 export CXX=clang++
 export CC=clang
 
 export BREW_PATH;
 BREW_PATH="$(brew --prefix)"
-export BREW_X64_PATH;
-BREW_X64_PATH="$("/usr/local/bin/brew" --prefix)"
-export BREW_BIN="/usr/local/bin"
-export BREW_SBIN="/usr/local/sbin"
+export BREW_BIN="/opt/homebrew/bin"
+export BREW_SBIN="/opt/homebrew/sbin"
 export CMAKE_EXTRA_OPTS='-DLLVM_TARGETS_TO_BUILD=arm64'
 
 export WORKDIR;
@@ -72,49 +32,53 @@ if [ ! -d "/tmp/Qt/$QT_VER" ]; then
   git clone https://github.com/engnr/qt-downloader.git
   cd qt-downloader
   git checkout f52efee0f18668c6d6de2dec0234b8c4bc54c597
-  # nested Qt 6.8.3 URL workaround
+  # nested Qt 6.9.1 URL workaround
   # sed -i '' "s/'qt{0}_{0}{1}{2}'.format(major, minor, patch)]))/'qt{0}_{0}{1}{2}'.format(major, minor, patch), 'qt{0}_{0}{1}{2}'.format(major, minor, patch)]))/g" qt-downloader
   # sed -i '' "s/'{}\/{}\/qt{}_{}\/'/'{0}\/{1}\/qt{2}_{3}\/qt{2}_{3}\/'/g" qt-downloader
+  # archived Qt 6.7.3 URL workaround
+  sed -i '' "s/official_releases/archive/g" qt-downloader
   cd "/tmp/Qt"
-  "$BREW_X64_PATH/bin/pipenv" run pip3 install py7zr requests semantic_version lxml
+  arch -arm64 "$BREW_PATH/bin/pipenv" run pip3 uninstall py7zr requests semantic_version lxml
+  arch -arm64 "$BREW_PATH/bin/pipenv" run pip3 install py7zr requests semantic_version lxml  --no-cache
   mkdir -p "$QT_VER/macos" ; ln -s "macos" "$QT_VER/clang_64"
-  # sed -i '' 's/args\.version \/ derive_toolchain_dir(args) \/ //g' "$WORKDIR/qt-downloader/qt-downloader" # Qt 6.8.3 workaround
-  "$BREW_X64_PATH/bin/pipenv" run "$WORKDIR/qt-downloader/qt-downloader" macos desktop "$QT_VER" clang_64 --opensource --addons qtmultimedia qtimageformats # -o "$QT_VER/clang_64"
+  # sed -i '' 's/args\.version \/ derive_toolchain_dir(args) \/ //g' "$WORKDIR/qt-downloader/qt-downloader" # Qt 6.9.1 workaround
+  arch -arm64 "$BREW_PATH/bin/pipenv" run "$WORKDIR/qt-downloader/qt-downloader" macos desktop "$QT_VER" clang_64 --opensource --addons qtmultimedia qtimageformats # -o "$QT_VER/clang_64"
 fi
 
 cd "$WORKDIR"
 ditto "/tmp/Qt/$QT_VER" "qt-downloader/$QT_VER"
 
 export Qt6_DIR="$WORKDIR/qt-downloader/$QT_VER/clang_64/lib/cmake/Qt$QT_VER_MAIN"
-export SDL3_DIR="$BREW_ARM64_PATH/opt/sdl3/lib/cmake/SDL3"
+export SDL3_DIR="$BREW_PATH/opt/sdl3/lib/cmake/SDL3"
 
-export PATH="$BREW_X64_PATH/opt/llvm@$LLVM_COMPILER_VER/bin:$WORKDIR/qt-downloader/$QT_VER/clang_64/bin:$BREW_BIN:$BREW_SBIN:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/Library/Apple/usr/bin:$PATH"
-export LDFLAGS="-L$BREW_ARM64_PATH/lib $BREW_ARM64_PATH/opt/ffmpeg@5/lib/libavcodec.dylib $BREW_ARM64_PATH/opt/ffmpeg@5/lib/libavformat.dylib $BREW_ARM64_PATH/opt/ffmpeg@5/lib/libavutil.dylib $BREW_ARM64_PATH/opt/ffmpeg@5/lib/libswscale.dylib $BREW_ARM64_PATH/opt/ffmpeg@5/lib/libswresample.dylib $BREW_ARM64_PATH/opt/llvm@$LLVM_COMPILER_VER/lib/c++/libc++.1.dylib $BREW_ARM64_PATH/lib/libSDL3.dylib $BREW_ARM64_PATH/lib/libGLEW.dylib $BREW_ARM64_PATH/opt/llvm@$LLVM_COMPILER_VER/lib/libunwind.1.dylib -Wl,-rpath,$BREW_ARM64_PATH/lib"
-export CPPFLAGS="-I$BREW_ARM64_PATH/include -I$BREW_X64_PATH/include -no-pie -D__MAC_OS_X_VERSION_MIN_REQUIRED=140000"
+export PATH="$BREW_PATH/opt/llvm@$LLVM_COMPILER_VER/bin:$WORKDIR/qt-downloader/$QT_VER/clang_64/bin:$BREW_BIN:$BREW_SBIN:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/Library/Apple/usr/bin:$PATH"
+export LDFLAGS="-L$BREW_PATH/lib $BREW_PATH/opt/ffmpeg@5/lib/libavcodec.dylib $BREW_PATH/opt/ffmpeg@5/lib/libavformat.dylib $BREW_PATH/opt/ffmpeg@5/lib/libavutil.dylib $BREW_PATH/opt/ffmpeg@5/lib/libswscale.dylib $BREW_PATH/opt/ffmpeg@5/lib/libswresample.dylib $BREW_PATH/opt/llvm@$LLVM_COMPILER_VER/lib/c++/libc++.1.dylib $BREW_PATH/lib/libSDL3.dylib $BREW_PATH/lib/libGLEW.dylib $BREW_PATH/opt/llvm@$LLVM_COMPILER_VER/lib/unwind/libunwind.1.dylib -Wl,-rpath,$BREW_PATH/lib"
+export CPPFLAGS="-I$BREW_PATH/include -I$BREW_PATH/include -no-pie -D__MAC_OS_X_VERSION_MIN_REQUIRED=140000"
 export CFLAGS="-D__MAC_OS_X_VERSION_MIN_REQUIRED=140000"
-export LIBRARY_PATH="$BREW_ARM64_PATH/lib"
-export LD_LIBRARY_PATH="$BREW_ARM64_PATH/lib"
+export LIBRARY_PATH="$BREW_PATH/lib"
+export LD_LIBRARY_PATH="$BREW_PATH/lib"
 
 export VULKAN_SDK
-VULKAN_SDK="$BREW_ARM64_PATH/opt/molten-vk"
+VULKAN_SDK="$BREW_PATH/opt/molten-vk"
 ln -s "$VULKAN_SDK/lib/libMoltenVK.dylib" "$VULKAN_SDK/lib/libvulkan.dylib" || true
 export VK_ICD_FILENAMES="$VULKAN_SDK/share/vulkan/icd.d/MoltenVK_icd.json"
 
 export LLVM_DIR
-LLVM_DIR="$BREW_ARM64_PATH/opt/llvm@$LLVM_COMPILER_VER"
-# exclude ffmpeg, LLVM, and sdl from submodule update
+LLVM_DIR="$BREW_PATH/opt/llvm@$LLVM_COMPILER_VER"
+# exclude ffmpeg, LLVM, opencv, and sdl from submodule update
 # shellcheck disable=SC2046
-git submodule -q update --init --depth=1 --jobs=8 $(awk '/path/ && !/ffmpeg/ && !/llvm/ && !/SDL/ { print $3 }' .gitmodules)
+git submodule -q update --init --depth=1 --jobs=8 $(awk '/path/ && !/ffmpeg/ && !/llvm/ && !/opencv/ && !/SDL/ { print $3 }' .gitmodules)
 
 # 3rdparty fixes
 sed -i '' "s/extern const double NSAppKitVersionNumber;/const double NSAppKitVersionNumber = 1343;/g" 3rdparty/hidapi/hidapi/mac/hid.c
 
-rm -rf build
 mkdir build && cd build || exit 1
 
 export MACOSX_DEPLOYMENT_TARGET=14.0
 
-"$BREW_X64_PATH/bin/cmake" .. \
+"$BREW_PATH/bin/cmake" .. \
+    -DBUILD_RPCS3_TESTS="${RUN_UNIT_TESTS}" \
+    -DRUN_RPCS3_TESTS="${RUN_UNIT_TESTS}" \
     -DUSE_SDL=ON \
     -DUSE_DISCORD_RPC=ON \
     -DUSE_VULKAN=ON \
@@ -137,23 +101,21 @@ export MACOSX_DEPLOYMENT_TARGET=14.0
     -DUSE_SYSTEM_FAUDIO=OFF \
     -DUSE_SYSTEM_SDL=ON \
     -DUSE_SYSTEM_OPENCV=ON \
-    $CMAKE_EXTRA_OPTS \
+    "$CMAKE_EXTRA_OPTS" \
     -DLLVM_TARGET_ARCH=arm64 \
     -DCMAKE_OSX_ARCHITECTURES=arm64 \
-    -DCMAKE_IGNORE_PATH="$BREW_X64_PATH/lib" \
-    -DCMAKE_IGNORE_PREFIX_PATH=/usr/local/opt \
-    -DCMAKE_SYSTEM_PROCESSOR=arm64 \
-    -DCMAKE_TOOLCHAIN_FILE=buildfiles/cmake/TCDarwinARM64.cmake \
+    -DCMAKE_IGNORE_PATH="$BREW_PATH/lib" \
+    -DCMAKE_IGNORE_PREFIX_PATH=/opt/homebrew/opt \
     -DCMAKE_CXX_FLAGS="-D__MAC_OS_X_VERSION_MIN_REQUIRED=140000" \
+    -DCMAKE_POLICY_VERSION_MINIMUM=3.5 \
+    -DCMAKE_OSX_SYSROOT="$(xcrun --sdk macosx --show-sdk-path)" \
     -G Ninja
 
 "$BREW_PATH/bin/ninja"; build_status=$?;
 
 cd ..
 
-{   [ "$CI_HAS_ARTIFACTS" = "true" ];
-} && SHOULD_DEPLOY="true" || SHOULD_DEPLOY="false"
-
-if [ "$build_status" -eq 0 ] && [ "$SHOULD_DEPLOY" = "true" ]; then
+# If it compiled succesfully let's deploy.
+if [ "$build_status" -eq 0 ]; then
     .ci/deploy-mac-arm64.sh
 fi

.ci/build-mac.sh

@@ -3,27 +3,24 @@
 # shellcheck disable=SC2086
 export HOMEBREW_NO_AUTO_UPDATE=1
 export HOMEBREW_NO_INSTALLED_DEPENDENTS_CHECK=1
-brew unlink certifi
-brew install -f --overwrite nasm ninja p7zip ccache pipenv #create-dmg
+export HOMEBREW_NO_ENV_HINTS=1
+export HOMEBREW_NO_INSTALL_CLEANUP=1
 
 #/usr/sbin/softwareupdate --install-rosetta --agree-to-license
 arch -x86_64 /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
 arch -x86_64 /usr/local/bin/brew update
-arch -x86_64 /usr/local/bin/brew install -f --overwrite python || arch -x86_64 /usr/local/bin/brew link --overwrite python
-arch -x86_64 /usr/local/bin/brew uninstall -f --ignore-dependencies ffmpeg
-arch -x86_64 /usr/local/bin/brew install -f --build-from-source ffmpeg@5
-arch -x86_64 /usr/local/bin/brew reinstall -f --build-from-source gnutls freetype
-arch -x86_64 /usr/local/bin/brew install llvm@$LLVM_COMPILER_VER glew cmake sdl3 vulkan-headers coreutils
-arch -x86_64 /usr/local/bin/brew link -f llvm@$LLVM_COMPILER_VER ffmpeg@5
+arch -x86_64 /usr/local/bin/brew install -f --overwrite --quiet python || arch -x86_64 /usr/local/bin/brew link --overwrite python
+arch -x86_64 /usr/local/bin/brew install -f --overwrite --quiet nasm ninja p7zip ccache pipenv gnutls freetype #create-dmg
+arch -x86_64 /usr/local/bin/brew install -f --quiet ffmpeg@5
+arch -x86_64 /usr/local/bin/brew install --quiet "llvm@$LLVM_COMPILER_VER" glew cmake sdl3 vulkan-headers coreutils
+arch -x86_64 /usr/local/bin/brew link -f --quiet "llvm@$LLVM_COMPILER_VER" ffmpeg@5
 
-# moltenvk based on commit for 1.2.11 release
-wget https://raw.githubusercontent.com/Homebrew/homebrew-core/6bfc8950c696d1f952425e8af2a6248603dc0df9/Formula/m/molten-vk.rb
-arch -x86_64 /usr/local/bin/brew install -f --overwrite ./molten-vk.rb
+# moltenvk based on commit for 1.3.0 release
+wget https://raw.githubusercontent.com/Homebrew/homebrew-core/7255441cbcafabaa8950f67c7ec55ff499dbb2d3/Formula/m/molten-vk.rb
+arch -x86_64 /usr/local/bin/brew install -f --overwrite --formula --quiet ./molten-vk.rb
 export CXX=clang++
 export CC=clang
 
-export BREW_PATH;
-BREW_PATH="$(brew --prefix)"
 export BREW_X64_PATH;
 BREW_X64_PATH="$("/usr/local/bin/brew" --prefix)"
 export BREW_BIN="/usr/local/bin"
@@ -39,14 +36,16 @@ if [ ! -d "/tmp/Qt/$QT_VER" ]; then
   git clone https://github.com/engnr/qt-downloader.git
   cd qt-downloader
   git checkout f52efee0f18668c6d6de2dec0234b8c4bc54c597
-  # nested Qt 6.8.3 URL workaround
+  # nested Qt 6.9.1 URL workaround
   # sed -i '' "s/'qt{0}_{0}{1}{2}'.format(major, minor, patch)]))/'qt{0}_{0}{1}{2}'.format(major, minor, patch), 'qt{0}_{0}{1}{2}'.format(major, minor, patch)]))/g" qt-downloader
   # sed -i '' "s/'{}\/{}\/qt{}_{}\/'/'{0}\/{1}\/qt{2}_{3}\/qt{2}_{3}\/'/g" qt-downloader
+  # archived Qt 6.7.3 URL workaround
+  sed -i '' "s/official_releases/archive/g" qt-downloader
   cd "/tmp/Qt"
-  "$BREW_X64_PATH/bin/pipenv" run pip3 install py7zr requests semantic_version lxml
+  arch -x86_64 "$BREW_X64_PATH/bin/pipenv" --python "$BREW_X64_PATH/bin/python3" run pip3 install py7zr requests semantic_version lxml
   mkdir -p "$QT_VER/macos" ; ln -s "macos" "$QT_VER/clang_64"
-  # sed -i '' 's/args\.version \/ derive_toolchain_dir(args) \/ //g' "$WORKDIR/qt-downloader/qt-downloader" # Qt 6.8.3 workaround
-  "$BREW_X64_PATH/bin/pipenv" run "$WORKDIR/qt-downloader/qt-downloader" macos desktop "$QT_VER" clang_64 --opensource --addons qtmultimedia qtimageformats # -o "$QT_VER/clang_64"
+  # sed -i '' 's/args\.version \/ derive_toolchain_dir(args) \/ //g' "$WORKDIR/qt-downloader/qt-downloader" # Qt 6.9.1 workaround
+  arch -x86_64 "$BREW_X64_PATH/bin/pipenv"  --python "$BREW_X64_PATH/bin/python3" run "$WORKDIR/qt-downloader/qt-downloader" macos desktop "$QT_VER" clang_64 --opensource --addons qtmultimedia qtimageformats # -o "$QT_VER/clang_64"
 fi
 
 cd "$WORKDIR"
@@ -81,6 +80,8 @@ mkdir build && cd build || exit 1
 export MACOSX_DEPLOYMENT_TARGET=14.0
 
 "$BREW_X64_PATH/bin/cmake" .. \
+    -DBUILD_RPCS3_TESTS=OFF \
+    -DRUN_RPCS3_TESTS=OFF \
     -DUSE_SDL=ON \
     -DUSE_DISCORD_RPC=ON \
     -DUSE_VULKAN=ON \
@@ -103,20 +104,21 @@ export MACOSX_DEPLOYMENT_TARGET=14.0
     -DUSE_SYSTEM_FAUDIO=OFF \
     -DUSE_SYSTEM_SDL=ON \
     -DUSE_SYSTEM_OPENCV=ON \
-    $CMAKE_EXTRA_OPTS \
+    "$CMAKE_EXTRA_OPTS" \
     -DLLVM_TARGET_ARCH=X86_64 \
     -DCMAKE_OSX_ARCHITECTURES=x86_64 \
-    -DCMAKE_IGNORE_PATH="$BREW_PATH/lib" \
+    -DCMAKE_IGNORE_PATH="$BREW_X64_PATH/lib" \
+    -DCMAKE_IGNORE_PREFIX_PATH=/usr/local/opt \
     -DCMAKE_CXX_FLAGS="-D__MAC_OS_X_VERSION_MIN_REQUIRED=140000" \
+    -DCMAKE_POLICY_VERSION_MINIMUM=3.5 \
+    -DCMAKE_OSX_SYSROOT="$(xcrun --sdk macosx --show-sdk-path)" \
     -G Ninja
 
-"$BREW_PATH/bin/ninja"; build_status=$?;
+"$BREW_X64_PATH/bin/ninja"; build_status=$?;
 
 cd ..
 
-{   [ "$CI_HAS_ARTIFACTS" = "true" ];
-} && SHOULD_DEPLOY="true" || SHOULD_DEPLOY="false"
-
-if [ "$build_status" -eq 0 ] && [ "$SHOULD_DEPLOY" = "true" ]; then
+# If it compiled succesfully let's deploy.
+if [ "$build_status" -eq 0 ]; then
     .ci/deploy-mac.sh
 fi

.ci/build-windows-clang.sh

@@ -0,0 +1,61 @@
+#!/bin/sh -ex
+
+git config --global --add safe.directory '*'
+
+# Pull all the submodules except some
+# Note: Tried to use git submodule status, but it takes over 20 seconds
+# shellcheck disable=SC2046
+git submodule -q update --init $(awk '/path/ && !/llvm/ && !/opencv/ && !/ffmpeg/ && !/curl/ && !/FAudio/ && !/zlib/ { print $3 }' .gitmodules)
+
+mkdir build && cd build || exit 1
+
+export CC="clang"
+export CXX="clang++"
+export LINKER=lld
+export LINKER_FLAG="-fuse-ld=${LINKER}"
+
+if [ -n "$LLVMVER" ]; then
+  export AR="llvm-ar-$LLVMVER"
+  export RANLIB="llvm-ranlib-$LLVMVER"
+else
+  export AR="llvm-ar"
+  export RANLIB="llvm-ranlib"
+fi
+
+cmake ..                                               \
+    -DCMAKE_PREFIX_PATH=/clang64                       \
+    -DCMAKE_INSTALL_PREFIX=/usr                        \
+    -DUSE_NATIVE_INSTRUCTIONS=OFF                      \
+    -DUSE_PRECOMPILED_HEADERS=OFF                      \
+    -DCMAKE_C_FLAGS="$CFLAGS"                          \
+    -DCMAKE_CXX_FLAGS="$CFLAGS"                        \
+    -DCMAKE_EXE_LINKER_FLAGS="${LINKER_FLAG}"          \
+    -DCMAKE_MODULE_LINKER_FLAGS="${LINKER_FLAG}"       \
+    -DCMAKE_SHARED_LINKER_FLAGS="${LINKER_FLAG}"       \
+    -DCMAKE_AR="$AR"                                   \
+    -DCMAKE_RANLIB="$RANLIB"                           \
+    -DUSE_SYSTEM_CURL=ON                               \
+    -DUSE_FAUDIO=OFF                                   \
+    -DUSE_SDL=ON                                       \
+    -DUSE_SYSTEM_SDL=OFF                               \
+    -DUSE_SYSTEM_FFMPEG=ON                             \
+    -DUSE_SYSTEM_OPENCV=ON                             \
+    -DUSE_SYSTEM_OPENAL=OFF                            \
+    -DUSE_DISCORD_RPC=ON                               \
+    -DOpenGL_GL_PREFERENCE=LEGACY                      \
+    -DWITH_LLVM=ON                                     \
+    -DLLVM_DIR=/clang64/lib/cmake/llvm                 \
+    -DVulkan_LIBRARY=/clang64/lib/libvulkan-1.dll.a    \
+    -DSTATIC_LINK_LLVM=ON                              \
+    -DBUILD_RPCS3_TESTS=OFF                            \
+    -DRUN_RPCS3_TESTS=OFF                              \
+    -G Ninja
+
+ninja; build_status=$?;
+
+cd ..
+
+# If it compiled succesfully let's deploy.
+if [ "$build_status" -eq 0 ]; then
+    .ci/deploy-windows-clang.sh "x86_64"
+fi

.ci/deploy-linux.sh

@@ -25,11 +25,17 @@ if [ "$DEPLOY_APPIMAGE" = "true" ]; then
     # Remove libvulkan because it causes issues with gamescope
     rm -f ./AppDir/usr/lib/libvulkan.so*
 
+    # Remove unused Qt6 libraries
+    rm -f ./AppDir/usr/lib/libQt6VirtualKeyboard.so*
+    rm -f ./AppDir/usr/plugins/platforminputcontexts/libqtvirtualkeyboardplugin.so*
+
     # Remove git directory containing local commit history file
     rm -rf ./AppDir/usr/share/rpcs3/git
 
-    linuxdeploy --appimage-extract
-    ./squashfs-root/plugins/linuxdeploy-plugin-appimage/usr/bin/appimagetool AppDir -g
+    curl -fsSLo /uruntime "https://github.com/VHSgunzo/uruntime/releases/download/v0.3.4/uruntime-appimage-dwarfs-$CPU_ARCH"
+    chmod +x /uruntime
+    /uruntime --appimage-mkdwarfs -f --set-owner 0 --set-group 0 --no-history --no-create-timestamp \
+    --compression zstd:level=22 -S26 -B32 --header /uruntime -i AppDir -o RPCS3.AppImage
 
     APPIMAGE_SUFFIX="linux_${CPU_ARCH}"
     if [ "$CPU_ARCH" = "x86_64" ]; then

.ci/deploy-llvm.sh

@@ -0,0 +1,20 @@
+#!/bin/sh -ex
+
+# First let's print some info about our caches
+"$(cygpath -u "$CCACHE_BIN_DIR")"/ccache.exe --show-stats -v
+
+# BUILD_blablabla is Azure specific, so we wrap it for portability
+ARTIFACT_DIR="$BUILD_ARTIFACTSTAGINGDIRECTORY"
+BUILD="llvmlibs_mt.7z"
+
+# Package artifacts
+7z a -m0=LZMA2 -mx9 "$BUILD" ./build/lib/Release-x64/llvm_build
+
+# Generate sha256 hashes
+# Write to file for GitHub releases
+sha256sum "$BUILD" | awk '{ print $1 }' | tee "$BUILD.sha256"
+echo "$(cat "$BUILD.sha256");$(stat -c %s "$BUILD")B" > GitHubReleaseMessage.txt
+
+# Move files to publishing directory
+cp -- "$BUILD" "$ARTIFACT_DIR"
+cp -- "$BUILD.sha256" "$ARTIFACT_DIR"

.ci/deploy-mac-arm64.sh

@@ -16,9 +16,9 @@ echo "AVVER=$AVVER" >> ../.ci/ci-vars.env
 cd bin
 mkdir "rpcs3.app/Contents/lib/" || true
 
-cp "$(realpath /opt/homebrew1/opt/llvm@$LLVM_COMPILER_VER/lib/c++/libc++abi.1.0.dylib)" "rpcs3.app/Contents/Frameworks/libc++abi.1.dylib"
-cp "$(realpath /opt/homebrew1/lib/libsharpyuv.0.dylib)" "rpcs3.app/Contents/lib/libsharpyuv.0.dylib"
-cp "$(realpath /opt/homebrew1/lib/libintl.8.dylib)" "rpcs3.app/Contents/lib/libintl.8.dylib"
+cp "$(realpath /opt/homebrew/opt/llvm@$LLVM_COMPILER_VER/lib/c++/libc++abi.1.0.dylib)" "rpcs3.app/Contents/Frameworks/libc++abi.1.dylib"
+cp "$(realpath /opt/homebrew/lib/libsharpyuv.0.dylib)" "rpcs3.app/Contents/lib/libsharpyuv.0.dylib"
+cp "$(realpath /opt/homebrew/lib/libintl.8.dylib)" "rpcs3.app/Contents/lib/libintl.8.dylib"
 
 rm -rf "rpcs3.app/Contents/Frameworks/QtPdf.framework" \
 "rpcs3.app/Contents/Frameworks/QtQml.framework" \
@@ -33,10 +33,8 @@ rm -rf "rpcs3.app/Contents/Frameworks/QtPdf.framework" \
 
 # Hack
 install_name_tool \
--delete_rpath /opt/homebrew1/lib \
 -delete_rpath /opt/homebrew/lib \
--delete_rpath /opt/homebrew1/opt/llvm@$LLVM_COMPILER_VER/lib \
--delete_rpath /usr/local/lib RPCS3.app/Contents/MacOS/rpcs3
+-delete_rpath /opt/homebrew/opt/llvm@$LLVM_COMPILER_VER/lib RPCS3.app/Contents/MacOS/rpcs3
 #-delete_rpath /opt/homebrew1/Cellar/sdl3/3.2.8/lib
 
 # Need to do this rename hack due to case insensitive filesystem
@@ -67,7 +65,7 @@ echo "IconIndex=0" >> Quickstart.url
 #SHA256SUM=$(shasum -a 256 "$DMG_FILEPATH" | awk '{ print $1 }')
 
 ARCHIVE_FILEPATH="$BUILD_ARTIFACTSTAGINGDIRECTORY/rpcs3-v${COMM_TAG}-${COMM_COUNT}-${COMM_HASH}_macos_arm64.7z"
-"$BREW_X64_PATH/bin/7z" a -mx9 "$ARCHIVE_FILEPATH" RPCS3.app Quickstart.url
+"$BREW_PATH/bin/7z" a -mx9 "$ARCHIVE_FILEPATH" RPCS3.app Quickstart.url
 FILESIZE=$(stat -f %z "$ARCHIVE_FILEPATH")
 SHA256SUM=$(shasum -a 256 "$ARCHIVE_FILEPATH" | awk '{ print $1 }')
 

.ci/deploy-windows-clang.sh

@@ -0,0 +1,38 @@
+#!/bin/sh -ex
+
+# source ci-vars.env
+# shellcheck disable=SC1091
+. .ci/ci-vars.env
+
+cd build || exit 1
+
+CPU_ARCH="${1:-x86_64}"
+
+echo "Deploying rpcs3 windows clang $CPU_ARCH"
+
+# BUILD_blablabla is CI specific, so we wrap it for portability
+ARTIFACT_DIR=$(cygpath -u "$BUILD_ARTIFACTSTAGINGDIRECTORY")
+MSYS2_CLANG_BIN=$(cygpath -w /clang64/bin)
+MSYS2_USR_BIN=$(cygpath -w /usr/bin)
+
+echo "Installing dependencies of: ./bin/rpcs3.exe (MSYS2 dir is '$MSYS2_CLANG_BIN', usr dir is '$MSYS2_USR_BIN')"
+cmake -DMSYS2_CLANG_BIN="$MSYS2_CLANG_BIN" -DMSYS2_USR_BIN="$MSYS2_USR_BIN" -Dexe=./bin/rpcs3.exe -P ../buildfiles/cmake/CopyRuntimeDependencies.cmake
+
+# Prepare compatibility and SDL database for packaging
+mkdir ./bin/config
+mkdir ./bin/config/input_configs
+curl -fsSL 'https://raw.githubusercontent.com/gabomdq/SDL_GameControllerDB/master/gamecontrollerdb.txt' 1> ./bin/config/input_configs/gamecontrollerdb.txt
+curl -fsSL 'https://rpcs3.net/compatibility?api=v1&export' | iconv -t UTF-8 1> ./bin/GuiConfigs/compat_database.dat
+
+# Package artifacts
+7z a -m0=LZMA2 -mx9 "$BUILD" ./bin/*
+
+# Generate sha256 hashes
+# Write to file for GitHub releases
+sha256sum "$BUILD" | awk '{ print $1 }' | tee "$BUILD.sha256"
+echo "$(cat "$BUILD.sha256");$(stat -c %s "$BUILD")B" > GitHubReleaseMessage.txt
+
+# Move files to publishing directory
+mkdir -p "$ARTIFACT_DIR"
+cp -- "$BUILD" "$ARTIFACT_DIR"
+cp -- "$BUILD.sha256" "$ARTIFACT_DIR"

.ci/deploy-windows.sh

@@ -1,14 +1,13 @@
 #!/bin/sh -ex
 
-# First let's see print some info about our caches
+# First let's print some info about our caches
 "$(cygpath -u "$CCACHE_BIN_DIR")"/ccache.exe --show-stats -v
 
-# BUILD_blablabla is Azure specific, so we wrap it for portability
+# BUILD_blablabla is CI specific, so we wrap it for portability
 ARTIFACT_DIR="$BUILD_ARTIFACTSTAGINGDIRECTORY"
 
 # Remove unecessary files
 rm -f ./bin/rpcs3.exp ./bin/rpcs3.lib ./bin/rpcs3.pdb ./bin/vc_redist.x64.exe
-rm -rf ./bin/git
 
 # Prepare compatibility and SDL database for packaging
 mkdir ./bin/config

.ci/docker.env

@@ -1,5 +1,4 @@
-# Variables set by Azure Pipelines
-CI_HAS_ARTIFACTS
+# Variables set by CI
 BUILD_REASON
 BUILD_SOURCEVERSION
 BUILD_ARTIFACTSTAGINGDIRECTORY
@@ -8,6 +7,7 @@ BUILD_SOURCEBRANCHNAME
 APPDIR
 ARTDIR
 RELEASE_MESSAGE
+RUN_UNIT_TESTS
 # Variables for build matrix
 COMPILER
 DEPLOY_APPIMAGE

.ci/export-azure-vars.sh

@@ -1,13 +0,0 @@
-#!/bin/sh -e
-
-# Export variables for later stages of the Azure pipeline
-# Values done in this manner will appear as environment variables
-# in later stages.
-
-# From pure-sh-bible
-# Setting 'IFS' tells 'read' where to split the string.
-while IFS='=' read -r key val; do
-    # Skip over lines containing comments.
-    [ "${key##\#*}" ] || continue
-    echo "##vso[task.setvariable variable=$key]$val"
-done < ".ci/ci-vars.env"

.ci/export-cirrus-vars.sh

@@ -1,13 +0,0 @@
-#!/bin/sh -e
-
-# Export variables for later stages of the Cirrus pipeline
-# Values done in this manner will appear as environment variables
-# in later stages.
-
-# From pure-sh-bible
-# Setting 'IFS' tells 'read' where to split the string.
-while IFS='=' read -r key val; do
-    # Skip over lines containing comments.
-    [ "${key##\#*}" ] || continue
-    export "$key"="$val"
-done < ".ci/ci-vars.env"

.ci/get_keys-windows.sh

@@ -1,4 +1,3 @@
 #!/bin/sh -ex
 
 curl -fLo "./llvm.lock" "https://github.com/RPCS3/llvm-mirror/releases/download/custom-build-win-${LLVM_VER}/llvmlibs_mt.7z.sha256"
-curl -fLo "./glslang.lock" "https://github.com/RPCS3/glslang/releases/download/custom-build-win/glslanglibs_mt.7z.sha256"

.ci/install-freebsd.sh

@@ -15,4 +15,4 @@ pkg install "llvm$LLVM_COMPILER_VER"
 pkg install git ccache cmake ninja "qt$QT_VER_MAIN-multimedia" "qt$QT_VER_MAIN-svg" glew openal-soft ffmpeg
 
 # Optional dependencies (libevdev is pulled by qtX-base)
-pkg install pkgconf alsa-lib pulseaudio sdl3 evdev-proto vulkan-headers vulkan-loader
+pkg install pkgconf alsa-lib pulseaudio sdl3 evdev-proto vulkan-headers vulkan-loader opencv

.ci/setup-llvm.sh

@@ -0,0 +1,63 @@
+#!/bin/sh -ex
+
+# Resource/dependency URLs
+CCACHE_URL="https://github.com/ccache/ccache/releases/download/v4.11.2/ccache-4.11.2-windows-x86_64.zip"
+
+DEP_URLS="         \
+    $CCACHE_URL"
+
+# CI doesn't make a cache dir if it doesn't exist, so we do it manually
+[ -d "$DEPS_CACHE_DIR" ] || mkdir "$DEPS_CACHE_DIR"
+
+# Pull the llvm submodule
+# shellcheck disable=SC2046
+git submodule -q update --init --depth=1 -- 3rdparty/llvm
+
+# Git bash doesn't have rev, so here it is
+rev()
+{
+    echo "$1" | awk '{ for(i = length($0); i != 0; --i) { a = a substr($0, i, 1); } } END { print a }'
+}
+
+# Usage: download_and_verify url checksum algo file
+# Check to see if a file is already cached, and the checksum matches. If not, download it.
+# Tries up to 3 times
+download_and_verify()
+{
+    url="$1"
+    correctChecksum="$2"
+    algo="$3"
+    fileName="$4"
+
+    for _ in 1 2 3; do
+        [ -e "$DEPS_CACHE_DIR/$fileName" ] || curl -fLo "$DEPS_CACHE_DIR/$fileName" "$url"
+        fileChecksum=$("${algo}sum" "$DEPS_CACHE_DIR/$fileName" | awk '{ print $1 }')
+        [ "$fileChecksum" = "$correctChecksum" ] && return 0
+    done
+
+    return 1;
+}
+
+# Some dependencies install here
+[ -d "./build/lib_ext/Release-x64" ] || mkdir -p "./build/lib_ext/Release-x64"
+
+for url in $DEP_URLS; do
+    # Get the filename from the URL and remove query strings (?arg=something).
+    fileName="$(rev "$(rev "$url" | cut -d'/' -f1)" | cut -d'?' -f1)"
+    [ -z "$fileName" ] && echo "Unable to parse url: $url" && exit 1
+
+    # shellcheck disable=SC1003
+    case "$url" in
+    *ccache*) checksum=$CCACHE_SHA; algo="sha256"; outDir="$CCACHE_BIN_DIR" ;;
+    *) echo "Unknown url resource: $url"; exit 1 ;;
+    esac
+
+    download_and_verify "$url" "$checksum" "$algo" "$fileName"
+    7z x -y "$DEPS_CACHE_DIR/$fileName" -aos -o"$outDir"
+done
+
+# Setup ccache tool
+[ -d "$CCACHE_DIR" ] || mkdir -p "$(cygpath -u "$CCACHE_DIR")"
+CCACHE_SH_DIR=$(cygpath -u "$CCACHE_BIN_DIR")
+mv "$CCACHE_SH_DIR"/ccache-*/* "$CCACHE_SH_DIR"
+cp "$CCACHE_SH_DIR"/ccache.exe "$CCACHE_SH_DIR"/cl.exe

.ci/setup-windows-ci-vars.sh

@@ -0,0 +1,39 @@
+#!/bin/sh -ex
+
+CPU_ARCH="${1:-win64}"
+COMPILER="${2:-msvc}"
+
+# These are CI specific, so we wrap them for portability
+REPO_NAME="$BUILD_REPOSITORY_NAME"
+REPO_BRANCH="$BUILD_SOURCEBRANCHNAME"
+PR_NUMBER="$BUILD_PR_NUMBER"
+
+# Gather explicit version number and number of commits
+COMM_TAG=$(awk '/version{.*}/ { printf("%d.%d.%d", $5, $6, $7) }' ./rpcs3/rpcs3_version.cpp)
+COMM_COUNT=$(git rev-list --count HEAD)
+COMM_HASH=$(git rev-parse --short=8 HEAD)
+
+# Format the above into filenames
+if [ -n "$PR_NUMBER" ]; then
+    AVVER="${COMM_TAG}-${COMM_HASH}"
+    BUILD_RAW="rpcs3-v${AVVER}_${CPU_ARCH}_${COMPILER}"
+    BUILD="${BUILD_RAW}.7z"
+else
+    AVVER="${COMM_TAG}-${COMM_COUNT}"
+    BUILD_RAW="rpcs3-v${AVVER}-${COMM_HASH}_${CPU_ARCH}_${COMPILER}"
+    BUILD="${BUILD_RAW}.7z"
+fi
+
+# BRANCH is used for experimental build warnings for pr builds, used in main_window.cpp.
+# BUILD is the name of the release artifact
+# BUILD_RAW is just filename
+# AVVER is used for GitHub releases, it is the version number.
+BRANCH="${REPO_NAME}/${REPO_BRANCH}"
+
+# SC2129
+{
+    echo "BRANCH=$BRANCH"
+    echo "BUILD=$BUILD"
+    echo "BUILD_RAW=$BUILD_RAW"
+    echo "AVVER=$AVVER"
+} >> .ci/ci-vars.env

.ci/setup-windows.sh

@@ -1,10 +1,5 @@
 #!/bin/sh -ex
 
-# These are Azure specific, so we wrap them for portability
-REPO_NAME="$BUILD_REPOSITORY_NAME"
-REPO_BRANCH="$SYSTEM_PULLREQUEST_SOURCEBRANCH"
-PR_NUMBER="$SYSTEM_PULLREQUEST_PULLREQUESTID"
-
 # Resource/dependency URLs
 # Qt mirrors can be volatile and slow, so we list 2
 #QT_HOST="http://mirrors.ocf.berkeley.edu/qt/"
@@ -20,9 +15,8 @@ QT_TOOL_URL="${QT_HOST}${QT_PREFIX}${QT_PREFIX_2}qttools${QT_SUFFIX}"
 QT_MM_URL="${QT_HOST}${QT_PREFIX}addons.qtmultimedia.${QT_PREFIX_2}qtmultimedia${QT_SUFFIX}"
 QT_SVG_URL="${QT_HOST}${QT_PREFIX}${QT_PREFIX_2}qtsvg${QT_SUFFIX}"
 LLVMLIBS_URL="https://github.com/RPCS3/llvm-mirror/releases/download/custom-build-win-${LLVM_VER}/llvmlibs_mt.7z"
-GLSLANG_URL='https://github.com/RPCS3/glslang/releases/latest/download/glslanglibs_mt.7z'
 VULKAN_SDK_URL="https://www.dropbox.com/scl/fi/sjjh0fc4ld281pjbl2xzu/VulkanSDK-${VULKAN_VER}-Installer.exe?rlkey=f6wzc0lvms5vwkt2z3qabfv9d&dl=1"
-CCACHE_URL="https://github.com/ccache/ccache/releases/download/v4.10.2/ccache-4.10.2-windows-x86_64.zip"
+CCACHE_URL="https://github.com/ccache/ccache/releases/download/v4.11.2/ccache-4.11.2-windows-x86_64.zip"
 
 DEP_URLS="         \
     $QT_BASE_URL   \
@@ -31,11 +25,10 @@ DEP_URLS="         \
     $QT_MM_URL     \
     $QT_SVG_URL    \
     $LLVMLIBS_URL  \
-    $GLSLANG_URL   \
     $VULKAN_SDK_URL\
     $CCACHE_URL"
 
-# Azure pipelines doesn't make a cache dir if it doesn't exist, so we do it manually
+# CI doesn't make a cache dir if it doesn't exist, so we do it manually
 [ -d "$DEPS_CACHE_DIR" ] || mkdir "$DEPS_CACHE_DIR"
 
 # Pull all the submodules except llvm, since it is built separately and we just download that build
@@ -80,7 +73,6 @@ for url in $DEP_URLS; do
     case "$url" in
     *qt*) checksum=$(curl -fL "${url}.sha1"); algo="sha1"; outDir="$QTDIR/" ;;
     *llvm*) checksum=$(curl -fL "${url}.sha256"); algo="sha256"; outDir="./build/lib_ext/Release-x64" ;;
-    *glslang*) checksum=$(curl -fL "${url}.sha256"); algo="sha256"; outDir="./build/lib_ext/Release-x64" ;;
     *ccache*) checksum=$CCACHE_SHA; algo="sha256"; outDir="$CCACHE_BIN_DIR" ;;
     *Vulkan*)
         # Vulkan setup needs to be run in batch environment
@@ -102,33 +94,3 @@ done
 CCACHE_SH_DIR=$(cygpath -u "$CCACHE_BIN_DIR")
 mv "$CCACHE_SH_DIR"/ccache-*/* "$CCACHE_SH_DIR"
 cp "$CCACHE_SH_DIR"/ccache.exe "$CCACHE_SH_DIR"/cl.exe
-
-# Gather explicit version number and number of commits
-COMM_TAG=$(awk '/version{.*}/ { printf("%d.%d.%d", $5, $6, $7) }' ./rpcs3/rpcs3_version.cpp)
-COMM_COUNT=$(git rev-list --count HEAD)
-COMM_HASH=$(git rev-parse --short=8 HEAD)
-
-# Format the above into filenames
-if [ -n "$PR_NUMBER" ]; then
-    AVVER="${COMM_TAG}-${COMM_HASH}"
-    BUILD_RAW="rpcs3-v${AVVER}_win64"
-    BUILD="${BUILD_RAW}.7z"
-else
-    AVVER="${COMM_TAG}-${COMM_COUNT}"
-    BUILD_RAW="rpcs3-v${AVVER}-${COMM_HASH}_win64"
-    BUILD="${BUILD_RAW}.7z"
-fi
-
-# BRANCH is used for experimental build warnings for pr builds, used in main_window.cpp.
-# BUILD is the name of the release artifact
-# BUILD_RAW is just filename
-# AVVER is used for GitHub releases, it is the version number.
-BRANCH="${REPO_NAME}/${REPO_BRANCH}"
-
-# SC2129
-{
-    echo "BRANCH=$BRANCH"
-    echo "BUILD=$BUILD"
-    echo "BUILD_RAW=$BUILD_RAW"
-    echo "AVVER=$AVVER"
-} >> .ci/ci-vars.env

.cirrus.yml

@@ -1,153 +0,0 @@
-env:
-  CIRRUS_CLONE_DEPTH: 0 # Unshallow clone to obtain proper GIT_VERSION
-  BUILD_REPOSITORY_NAME: $CIRRUS_REPO_FULL_NAME
-  SYSTEM_PULLREQUEST_SOURCEBRANCH: $CIRRUS_BRANCH
-  SYSTEM_PULLREQUEST_PULLREQUESTID: $CIRRUS_PR
-  BUILD_SOURCEVERSION: $CIRRUS_CHANGE_IN_REPO
-  BUILD_SOURCEBRANCHNAME: $CIRRUS_BRANCH
-  RPCS3_TOKEN: ENCRYPTED[100ebb8e3552bf2021d0ef55dccda3e58d27be5b6cab0b0b92843ef490195d3c4edaefa087e4a3b425caa6392300b9b1]
-  QT_VER_MAIN: '6'
-  QT_VER: '6.8.3'
-  LLVM_COMPILER_VER: '19'
-  LLVM_VER: '19.1.7'
-
-# windows_task:
-#   matrix:
-#     - name: Cirrus Windows
-#       windows_container:
-#         image: cirrusci/windowsservercore:visualstudio2019
-#         cpu: 8
-#         memory: 16G
-#   env:
-#     CIRRUS_SHELL: "bash"
-#     COMPILER: msvc
-#     BUILD_ARTIFACTSTAGINGDIRECTORY: ${CIRRUS_WORKING_DIR}\artifacts\
-#     QT_VER_MSVC: 'msvc2022'
-#     QT_DATE: '202503201308'
-#     QTDIR: C:\Qt\${QT_VER}\${QT_VER_MSVC}_64
-#     VULKAN_VER: '1.3.268.0'
-#     VULKAN_SDK_SHA: '8459ef49bd06b697115ddd3d97c9aec729e849cd775f5be70897718a9b3b9db5'
-#     VULKAN_SDK: C:\VulkanSDK\${VULKAN_VER}
-#     CACHE_DIR: "./cache"
-#     UPLOAD_COMMIT_HASH: 7d09e3be30805911226241afbb14f8cdc2eb054e
-#     UPLOAD_REPO_FULL_NAME: "rpcs3/rpcs3-binaries-win"
-#   deps_cache:
-#     folder: "./cache"
-#   #obj_cache:
-#   #  folder: "./tmp"
-#   #obj2_cache:
-#   #  folder: "./rpcs3/x64"
-#   setup_script:
-#     - './.ci/get_keys-windows.sh'
-#     - './.ci/setup-windows.sh'
-#   rpcs3_script:
-#     - export PATH=${PATH}:"C:\Program Files (x86)\Microsoft Visual Studio\2019\BuildTools\MSBuild\Current\Bin"
-#     - msbuild.exe rpcs3.sln //p:Configuration=Release //m
-#   deploy_script:
-#     - mkdir artifacts
-#     - source './.ci/export-cirrus-vars.sh'
-#     - './.ci/deploy-windows.sh'
-#   artifacts:
-#     name: Artifact
-#     path: "*.7z*"
-#   push_script: |
-#     if [ "$CIRRUS_REPO_OWNER" = "RPCS3" ] && [ -z "$CIRRUS_PR" ] && [ "$CIRRUS_BRANCH" = "master" ]; then
-#       source './.ci/export-cirrus-vars.sh'
-#       './.ci/github-upload.sh'
-#     fi;
-
-# linux_task:
-#   container:
-#     image: rpcs3/rpcs3-ci-jammy:1.2
-#     cpu: 4
-#     memory: 16G
-#   env:
-#     BUILD_ARTIFACTSTAGINGDIRECTORY: ${CIRRUS_WORKING_DIR}/artifacts
-#     ARTDIR: ${CIRRUS_WORKING_DIR}/artifacts/
-#     CCACHE_DIR: "/tmp/ccache_dir"
-#     CCACHE_MAXSIZE: 300M
-#     CI_HAS_ARTIFACTS: true
-#     UPLOAD_COMMIT_HASH: d812f1254a1157c80fd402f94446310560f54e5f
-#     UPLOAD_REPO_FULL_NAME: "rpcs3/rpcs3-binaries-linux"
-#     DEPLOY_APPIMAGE: true
-#     APPDIR: "./appdir"
-#     RELEASE_MESSAGE: "../GitHubReleaseMessage.txt"
-#   ccache_cache:
-#     folder: "/tmp/ccache_dir"
-#   matrix:
-#     - name: Cirrus Linux GCC
-#       env:
-#         COMPILER: gcc
-#       gcc_script:
-#         - mkdir artifacts
-#         - ".ci/build-linux.sh"
-#     - name: Cirrus Linux Clang
-#       env:
-#         COMPILER: clang
-#       clang_script:
-#         - mkdir artifacts
-#         - ".ci/build-linux.sh"
-#   artifacts:
-#     name: Artifact
-#     path: "artifacts/*"
-#   push_script: |
-#     if [ "$CIRRUS_REPO_OWNER" = "RPCS3" ] && [ -z "$CIRRUS_PR" ] && [ "$CIRRUS_BRANCH" = "master" ] && [ "$COMPILER" = "gcc" ]; then
-#       COMM_TAG=$(awk '/version{.*}/ { printf("%d.%d.%d", $5, $6, $7) }' ./rpcs3/rpcs3_version.cpp)
-#       COMM_COUNT=$(git rev-list --count HEAD)
-#       COMM_HASH=$(git rev-parse --short=8 HEAD)
-
-#       export AVVER="${COMM_TAG}-${COMM_COUNT}"
-
-#       .ci/github-upload.sh
-#     fi;
-
-freebsd_task:
-  matrix:
-    - name: Cirrus FreeBSD
-      freebsd_instance:
-        image_family: freebsd-13-5
-        cpu: 8
-        memory: 8G
-  env:
-    CCACHE_MAXSIZE: 300M # 3x clean build, rounded
-    CCACHE_DIR: /tmp/ccache_dir
-  ccache_cache:
-    folder: /tmp/ccache_dir
-  install_script: "sh -ex ./.ci/install-freebsd.sh"
-  script: "./.ci/build-freebsd.sh"
-
-# linux_aarch64_task:
-#   env:
-#     BUILD_ARTIFACTSTAGINGDIRECTORY: ${CIRRUS_WORKING_DIR}/artifacts
-#     ARTDIR: ${CIRRUS_WORKING_DIR}/artifacts/
-#     CCACHE_DIR: "/tmp/ccache_dir"
-#     CCACHE_MAXSIZE: 300M
-#     CI_HAS_ARTIFACTS: true
-#     UPLOAD_COMMIT_HASH: a1d35836e8d45bfc6f63c26f0a3e5d46ef622fe1
-#     UPLOAD_REPO_FULL_NAME: "rpcs3/rpcs3-binaries-linux-arm64"
-#     DEPLOY_APPIMAGE: true
-#     APPDIR: "./appdir"
-#     RELEASE_MESSAGE: "../GitHubReleaseMessage.txt"
-#     COMPILER: clang
-#   ccache_cache:
-#     folder: "/tmp/ccache_dir"
-#   matrix:
-#     - name: Cirrus Linux AArch64 Clang
-#       arm_container:
-#         image: 'docker.io/rpcs3/rpcs3-ci-jammy-aarch64:1.2'
-#         cpu: 8
-#         memory: 8G
-#       clang_script:
-#         - mkdir artifacts
-#         - "sh -ex ./.ci/build-linux-aarch64.sh"
-#   artifacts:
-#     name: Artifact
-#     path: "artifacts/*"
-#   push_script: |
-#     if [ "$CIRRUS_REPO_OWNER" = "RPCS3" ] && [ -z "$CIRRUS_PR" ] && [ "$CIRRUS_BRANCH" = "master" ]; then
-#       COMM_TAG=$(awk '/version{.*}/ { printf("%d.%d.%d", $5, $6, $7) }' ./rpcs3/rpcs3_version.cpp)
-#       COMM_COUNT=$(git rev-list --count HEAD)
-#       COMM_HASH=$(git rev-parse --short=8 HEAD)
-#       export AVVER="${COMM_TAG}-${COMM_COUNT}"
-#       .ci/github-upload.sh
-#     fi;

.github/CONTRIBUTING.md

@@ -16,4 +16,4 @@ Submitting your test results for Commercial Games must be done on our forums. Pl
 
 # Contributing
 
-Check the [Coding Style Guidelines](https://github.com/RPCS3/rpcs3/wiki/Coding-Style) and [Developer Information](https://github.com/RPCS3/rpcs3/wiki/Developer-Information). If you have any questions, hit us up on our [Discord Server](https://discord.me/RPCS3) in the **#development** channel.
+Check the [Coding Style Guidelines](https://github.com/RPCS3/rpcs3/wiki/Coding-Style) and [Developer Information](https://github.com/RPCS3/rpcs3/wiki/Developer-Information). If you have any questions, hit us up on our [Discord Server](https://discord.gg/rpcs3) in the **#development** channel.

.github/ISSUE_TEMPLATE/1-regression-report.yml

@@ -7,7 +7,7 @@ body:
     attributes:
       value: |
         # Summary
-        Please do not ask for help or report compatibility regressions here, use [RPCS3 Discord server](https://discord.me/RPCS3) or [forums](https://forums.rpcs3.net/) instead.
+        Please do not ask for help or report compatibility regressions here, use [RPCS3 Discord server](https://discord.gg/rpcs3) or [forums](https://forums.rpcs3.net/) instead.
   - type: textarea
     id: quick-summary
     attributes:
@@ -50,7 +50,7 @@ body:
         * Completely close RPCS3 and locate the log file.
 
         RPCS3's Log file will be ```RPCS3.log.gz``` (sometimes shows as RPCS3.log with zip icon) or ```RPCS3.log``` (sometimes shows as RPCS3 wtih notepad icon).
-        * On Windows it will be in the RPCS3 directory near the executable
+        * On Windows it will be in the ```log``` folder inside your RPCS3 folder.
         * On Linux it will be in ```~/.cache/rpcs3/```
         * On MacOS it will be in ```~/Library/Caches/rpcs3```. If you're unable to locate it copy paste the path in Spotlight and hit enter.
   - type: textarea

.github/ISSUE_TEMPLATE/2-bug-report.yml

@@ -7,7 +7,7 @@ body:
     attributes:
       value: |
         # Summary
-        Please do not ask for help or report compatibility regressions here, use [RPCS3 Discord server](https://discord.me/RPCS3) or [forums](https://forums.rpcs3.net/) instead.
+        Please do not ask for help or report compatibility regressions here, use [RPCS3 Discord server](https://discord.gg/rpcs3) or [forums](https://forums.rpcs3.net/) instead.
   - type: textarea
     id: quick-summary
     attributes:
@@ -36,7 +36,7 @@ body:
         * Completely close RPCS3 and locate the log file.
 
         RPCS3's Log file will be ```RPCS3.log.gz``` (sometimes shows as RPCS3.log with zip icon) or ```RPCS3.log``` (sometimes shows as RPCS3 wtih notepad icon).
-        * On Windows it will be in the RPCS3 directory near the executable
+        * On Windows it will be in the ```log``` folder inside your RPCS3 folder.
         * On Linux it will be in ```~/.cache/rpcs3/```
         * On MacOS it will be in ```~/Library/Caches/rpcs3```. If you're unable to locate it copy paste the path in Spotlight and hit enter.
   - type: textarea

.github/ISSUE_TEMPLATE/3-feature-request.yml

@@ -6,7 +6,7 @@ body:
   - type: markdown
     attributes:
       value: |
-        Please do not ask for help or report compatibility regressions here, use [RPCS3 Discord server](https://discord.me/RPCS3) or [forums](https://forums.rpcs3.net/) instead.
+        Please do not ask for help or report compatibility regressions here, use [RPCS3 Discord server](https://discord.gg/rpcs3) or [forums](https://forums.rpcs3.net/) instead.
   - type: textarea
     id: quick-summary
     attributes:
@@ -31,6 +31,6 @@ body:
         * If this feature is something that a game is trying to use, upload a log file for it.
 
         RPCS3's Log file will be ```RPCS3.log.gz``` (sometimes shows as RPCS3.log with zip icon) or ```RPCS3.log``` (sometimes shows as RPCS3 wtih notepad icon).
-        * On Windows it will be in the RPCS3 directory near the executable
+        * On Windows it will be in the ```log``` folder inside your RPCS3 folder.
         * On Linux it will be in ```~/.cache/rpcs3/```
         * On MacOS it will be in ```~/Library/Caches/rpcs3```. If you're unable to locate it copy paste the path in Spotlight and hit enter.

.github/ISSUE_TEMPLATE/4-advanced.md

@@ -7,7 +7,7 @@ assignees: ''
 
 ---
 
-## Please do not ask for help or report compatibility regressions here, use [RPCS3 Discord server](https://discord.me/RPCS3) or [forums](https://forums.rpcs3.net/) instead.
+## Please do not ask for help or report compatibility regressions here, use [RPCS3 Discord server](https://discord.gg/rpcs3) or [forums](https://forums.rpcs3.net/) instead.
 
 You're using the advanced template. You're expected to know what to write in order to fill in all the required information for proper report.
 

.github/ISSUE_TEMPLATE/config.yml

@@ -4,7 +4,7 @@ contact_links:
     url: https://rpcs3.net/quickstart
     about: Everything you need to know to install and configure emulator, and add games
   - name: Ask for help
-    url: https://discord.me/RPCS3
+    url: https://discord.gg/rpcs3
     about: If you have some questions or need help, please use our Discord server instead of GitHub
   - name: Report game compatibility
     url: https://forums.rpcs3.net/thread-196671.html

.github/PR-BUILD.md

@@ -1,18 +0,0 @@
-## How to test a PR build
-
-Please take into account, that RPCS3 build usually takes some time (about 15 mins), so you can't access a build if a PR was just submitted.
-
-- Open a PR you want to test
-- Scroll to the very bottom and locate the **Checks** section
-- Click on **Show all checks**
-	You are supposed to see something like this
-	![image](https://user-images.githubusercontent.com/10283761/116630952-2cd99e00-a94c-11eb-933e-986d6020ca92.png)
-- Click on __Details__ on either **Cirrus Linux GCC** or **Cirrus Windows**
-- Click **View more details on Cirrus CI** at the very bottom
-	![image](https://user-images.githubusercontent.com/10283761/116631111-5e526980-a94c-11eb-95f7-751e6f15e1ea.png)
-- Click on the download button for **Artifact** on the **Artifacts** block
-	![image](https://user-images.githubusercontent.com/10283761/116631322-bee1a680-a94c-11eb-89a3-be365783582e.png)
-
-- Congratulations! You are now downloading an RPCS3 build for that specific PR.
-
-__Please note that PR builds are not supposed to be stable because they contain new changesets.__

.github/PULL_REQUEST_TEMPLATE/1-default.md

@@ -1,3 +0,0 @@
-<!-- Please include a summary of the change and which issue is fixed. -->
-
-[How to test this PR](.github/PR-BUILD.md)

.github/workflows/llvm.yml

@@ -0,0 +1,72 @@
+name: Build LLVM
+
+defaults:
+  run:
+    shell: bash
+on:
+  workflow_dispatch:
+
+concurrency:
+  group: ${{ github.ref }}-${{ github.event_name }}
+  cancel-in-progress: true
+
+env:
+  BUILD_ARTIFACTSTAGINGDIRECTORY: ${{ github.workspace }}/artifacts/
+
+jobs:
+  Windows_Build:
+    if: github.event_name == 'workflow_dispatch'
+    name: LLVM Windows (MSVC)
+    runs-on: windows-2025
+    env:
+      COMPILER: msvc
+      CCACHE_SHA: '1f39f3ad5aae3fe915e99ad1302633bc8f6718e58fa7c0de2b0ba7e080f0f08c'
+      CCACHE_BIN_DIR: 'C:\ccache_bin'
+      CCACHE_DIR: 'C:\ccache'
+      CCACHE_INODECACHE: 'true'
+      CCACHE_SLOPPINESS: 'time_macros'
+      DEPS_CACHE_DIR: ./dependency_cache
+    steps:
+
+      - name: Checkout repository
+        uses: actions/checkout@main
+        with:
+          fetch-depth: 0
+
+      - name: Restore Dependencies Cache
+        uses: actions/cache/restore@main
+        id: restore-dependencies-cache
+        with:
+          path: ${{ env.DEPS_CACHE_DIR }}
+          key: "${{ runner.os }}-${{ env.COMPILER }}-llvm-${{ env.CCACHE_SHA }}"
+          restore-keys: ${{ runner.os }}-${{ env.COMPILER }}-llvm
+
+      - name: Download and unpack dependencies
+        run: .ci/setup-llvm.sh
+
+      - name: Add msbuild to PATH
+        uses: microsoft/setup-msbuild@main
+
+      - name: Compile LLVM
+        shell: pwsh
+        run: msbuild 3rdparty\llvm\llvm_build.vcxproj /p:SolutionDir="$(pwd)/" /p:Configuration=Release /v:minimal /p:Platform=x64 /p:PreferredToolArchitecture=x64 /p:CLToolPath=${{ env.CCACHE_BIN_DIR }} /p:UseMultiToolTask=true /p:CustomAfterMicrosoftCommonTargets="${{ github.workspace }}\buildfiles\msvc\ci_only.targets"
+
+      - name: Pack up build artifacts
+        run: |
+          mkdir -p "${{ env.BUILD_ARTIFACTSTAGINGDIRECTORY }}"
+          .ci/deploy-llvm.sh
+
+      - name: Upload artifacts (7z)
+        uses: actions/upload-artifact@main
+        with:
+          name: LLVM for Windows (MSVC)
+          path: ${{ env.BUILD_ARTIFACTSTAGINGDIRECTORY }}
+          compression-level: 0
+          if-no-files-found: error
+
+      - name: Save Dependencies Cache
+        if: github.ref == 'refs/heads/master'
+        uses: actions/cache/save@main
+        with:
+          path: ${{ env.DEPS_CACHE_DIR }}
+          key: ${{ steps.restore-dependencies-cache.outputs.cache-primary-key }}

.github/workflows/rpcs3.yml

@@ -5,6 +5,8 @@ defaults:
     shell: bash
 on:
   push:
+    branches:
+      - master # Only trigger push event on 'master' branch
   pull_request:
   workflow_dispatch:
 
@@ -15,36 +17,42 @@ concurrency:
 env:
   BUILD_REPOSITORY_NAME: ${{ github.repository }}
   BUILD_SOURCEBRANCHNAME: ${{ github.ref_name }}
+  BUILD_PR_NUMBER: ${{ github.event.pull_request.number }}
   BUILD_SOURCEVERSION: ${{ github.sha }}
   BUILD_ARTIFACTSTAGINGDIRECTORY: ${{ github.workspace }}/artifacts/
 
 jobs:
   Linux_Build:
+    # Only run push event on master branch of main repo, but run all PRs
+    if: github.event_name != 'push' || (github.repository == 'RPCS3/rpcs3' && github.ref_name == 'master')
     strategy:
       fail-fast: false
       matrix:
         include:
           - os: ubuntu-24.04
-            docker_img: "rpcs3/rpcs3-ci-jammy:1.3"
+            docker_img: "rpcs3/rpcs3-ci-jammy:1.6"
             build_sh: "/rpcs3/.ci/build-linux.sh"
             compiler: clang
             UPLOAD_COMMIT_HASH: d812f1254a1157c80fd402f94446310560f54e5f
             UPLOAD_REPO_FULL_NAME: "rpcs3/rpcs3-binaries-linux"
           - os: ubuntu-24.04
-            docker_img: "rpcs3/rpcs3-ci-jammy:1.3"
+            docker_img: "rpcs3/rpcs3-ci-jammy:1.6"
             build_sh: "/rpcs3/.ci/build-linux.sh"
             compiler: gcc
           - os: ubuntu-24.04-arm
-            docker_img: "rpcs3/rpcs3-ci-jammy-aarch64:1.3"
+            docker_img: "rpcs3/rpcs3-ci-jammy-aarch64:1.6"
             build_sh: "/rpcs3/.ci/build-linux-aarch64.sh"
             compiler: clang
             UPLOAD_COMMIT_HASH: a1d35836e8d45bfc6f63c26f0a3e5d46ef622fe1
             UPLOAD_REPO_FULL_NAME: "rpcs3/rpcs3-binaries-linux-arm64"
+          - os: ubuntu-24.04-arm
+            docker_img: "rpcs3/rpcs3-ci-jammy-aarch64:1.6"
+            build_sh: "/rpcs3/.ci/build-linux-aarch64.sh"
+            compiler: gcc
     name: RPCS3 Linux ${{ matrix.os }} ${{ matrix.compiler }}
     runs-on: ${{ matrix.os }}
     env:
       CCACHE_DIR: ${{ github.workspace }}/ccache
-      CI_HAS_ARTIFACTS: true
       DEPLOY_APPIMAGE: true
       APPDIR: "/rpcs3/build/appdir"
       ARTDIR: "/root/artifacts"
@@ -52,28 +60,29 @@ jobs:
       COMPILER: ${{ matrix.compiler }}
       UPLOAD_COMMIT_HASH: ${{ matrix.UPLOAD_COMMIT_HASH }}
       UPLOAD_REPO_FULL_NAME: ${{ matrix.UPLOAD_REPO_FULL_NAME }}
+      RUN_UNIT_TESTS: github.event_name == 'pull_request' && 'ON' || 'OFF'
     steps:
       - name: Checkout repository
         uses: actions/checkout@main
         with:
           fetch-depth: 0
 
-      - name: Setup Cache
-        uses: actions/cache@main
+      - name: Restore build Ccache
+        uses: actions/cache/restore@main
+        id: restore-build-ccache
         with:
           path: ${{ env.CCACHE_DIR }}
           key: ${{ runner.os }}-ccache-${{ matrix.compiler }}-${{ runner.arch }}-${{github.run_id}}
-          restore-keys: | 
-            ${{ runner.os }}-ccache-${{ matrix.compiler }}-${{ runner.arch }}-
+          restore-keys: ${{ runner.os }}-ccache-${{ matrix.compiler }}-${{ runner.arch }}-
 
       - name: Docker setup and build
         run: |
           docker pull --quiet ${{ matrix.docker_img }}
-          docker run                      \
-            -v $PWD:/rpcs3              \
+          docker run \
+            -v $PWD:/rpcs3 \
             --env-file .ci/docker.env \
             -v ${{ env.CCACHE_DIR }}:/root/.ccache  \
-            -v ${{ github.workspace }}/artifacts:/root/artifacts \
+            -v ${{ env.BUILD_ARTIFACTSTAGINGDIRECTORY }}:${{ env.ARTDIR }} \
             ${{ matrix.docker_img }} \
             ${{ matrix.build_sh }}
 
@@ -99,19 +108,117 @@ jobs:
           export AVVER="${COMM_TAG}-${COMM_COUNT}"
           .ci/github-upload.sh
 
+      - name: Save build Ccache
+        if: github.ref == 'refs/heads/master'
+        uses: actions/cache/save@main
+        with:
+          path: ${{ env.CCACHE_DIR }}
+          key: ${{ steps.restore-build-ccache.outputs.cache-primary-key }}
+
+  Mac_Build:
+    # Only run push event on master branch of main repo, but run all PRs
+    if: github.event_name != 'push' || (github.repository == 'RPCS3/rpcs3' && github.ref_name == 'master')
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - name: Intel
+            build_sh: "arch -X86_64 .ci/build-mac.sh"
+            UPLOAD_COMMIT_HASH: 51ae32f468089a8169aaf1567de355ff4a3e0842
+            UPLOAD_REPO_FULL_NAME: rpcs3/rpcs3-binaries-mac
+          - name: Apple Silicon
+            build_sh: .ci/build-mac-arm64.sh
+            UPLOAD_COMMIT_HASH: 8e21bdbc40711a3fccd18fbf17b742348b0f4281
+            UPLOAD_REPO_FULL_NAME: rpcs3/rpcs3-binaries-mac-arm64
+    name: RPCS3 Mac ${{ matrix.name }} 
+    runs-on: macos-14
+    env:
+      CCACHE_DIR: /tmp/ccache_dir
+      QT_VER: '6.7.3'
+      QT_VER_MAIN: '6'
+      LLVM_COMPILER_VER: '19'
+      RELEASE_MESSAGE: ../GitHubReleaseMessage.txt
+      UPLOAD_COMMIT_HASH: ${{ matrix.UPLOAD_COMMIT_HASH }}
+      UPLOAD_REPO_FULL_NAME: ${{ matrix.UPLOAD_REPO_FULL_NAME }}
+      RUN_UNIT_TESTS: github.event_name == 'pull_request' && 'ON' || 'OFF'
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@main
+        with:
+          fetch-depth: 0
+
+      - name: Restore Build Ccache
+        uses: actions/cache/restore@main
+        id: restore-build-ccache
+        with:
+          path: ${{ env.CCACHE_DIR }}
+          key: ${{ runner.os }}-ccache-${{ matrix.name }}-${{github.run_id}}
+          restore-keys: ${{ runner.os }}-ccache-${{ matrix.name }}-
+
+      - name: Restore Qt Cache
+        uses: actions/cache/restore@main
+        id: restore-qt-cache
+        with:
+          path: /tmp/Qt
+          key: ${{ runner.os }}-qt-${{ matrix.name }}-${{ env.QT_VER }}
+          restore-keys: ${{ runner.os }}-qt-${{ matrix.name }}-${{ env.QT_VER }}
+
+      - name: Build
+        run: ${{ matrix.build_sh }}
+
+      - name: Upload artifacts
+        uses: actions/upload-artifact@main
+        with:
+          name: RPCS3 for Mac (${{ matrix.name }})
+          path: ${{ env.BUILD_ARTIFACTSTAGINGDIRECTORY }}
+          compression-level: 0
+
+      - name: Export Variables
+        run: |
+          while IFS='=' read -r key val; do
+            # Skip lines that are empty or start with '#'
+            [[ -z "$key" || "$key" =~ ^# ]] && continue
+            echo "$key=$val" >> "${{ github.env }}"
+          done < .ci/ci-vars.env
+
+      - name: Deploy master build to GitHub Releases
+        if: |
+          github.event_name != 'pull_request' &&
+          github.repository == 'RPCS3/rpcs3' &&
+          github.ref == 'refs/heads/master'
+        env:
+          RPCS3_TOKEN: ${{ secrets.RPCS3_TOKEN }}
+        run: .ci/github-upload.sh
+
+      - name: Save Build Ccache
+        if: github.ref == 'refs/heads/master'
+        uses: actions/cache/save@main
+        with:
+          path: ${{ env.CCACHE_DIR }}
+          key: ${{ steps.restore-build-ccache.outputs.cache-primary-key }}
+
+      - name: Save Qt Cache
+        if: github.ref == 'refs/heads/master'
+        uses: actions/cache/save@main
+        with:
+          path: /tmp/Qt
+          key: ${{ steps.restore-qt-cache.outputs.cache-primary-key }}
+
   Windows_Build:
+    # Only run push event on master branch of main repo, but run all PRs
+    if: github.event_name != 'push' || (github.repository == 'RPCS3/rpcs3' && github.ref_name == 'master')
     name: RPCS3 Windows
     runs-on: windows-2025
     env:
       COMPILER: msvc
       QT_VER_MAIN: '6'
-      QT_VER: '6.8.3'
+      QT_VER: '6.9.1'
       QT_VER_MSVC: 'msvc2022'
-      QT_DATE: '202503201308'
+      QT_DATE: '202505291653'
       LLVM_VER: '19.1.7'
       VULKAN_VER: '1.3.268.0'
       VULKAN_SDK_SHA: '8459ef49bd06b697115ddd3d97c9aec729e849cd775f5be70897718a9b3b9db5'
-      CCACHE_SHA: '6252f081876a9a9f700fae13a5aec5d0d486b28261d7f1f72ac11c7ad9df4da9'
+      CCACHE_SHA: '1f39f3ad5aae3fe915e99ad1302633bc8f6718e58fa7c0de2b0ba7e080f0f08c'
       CCACHE_BIN_DIR: 'C:\ccache_bin'
       CCACHE_DIR: 'C:\ccache'
       CCACHE_INODECACHE: 'true'
@@ -126,6 +233,12 @@ jobs:
         with:
           fetch-depth: 0
 
+      - name: Setup NuGet
+        uses: nuget/setup-nuget@v2
+
+      - name: Restore NuGet packages
+        run: nuget restore rpcs3.sln
+
       - name: Setup env
         shell: pwsh
         run: |
@@ -135,22 +248,26 @@ jobs:
       - name: Get Cache Keys
         run: .ci/get_keys-windows.sh
 
-      - name: Setup Build Ccache
-        uses: actions/cache@main
+      - name: Restore Build Ccache
+        uses: actions/cache/restore@main
+        id: restore-build-ccache
         with:
           path: ${{ env.CCACHE_DIR }}
           key: "${{ runner.os }}-ccache-${{ env.COMPILER }}-${{github.run_id}}"
           restore-keys: ${{ runner.os }}-ccache-${{ env.COMPILER }}-
 
-      - name: Setup Dependencies Cache
-        uses: actions/cache@main
+      - name: Restore Dependencies Cache
+        uses: actions/cache/restore@main
+        id: restore-dependencies-cache
         with:
           path: ${{ env.DEPS_CACHE_DIR }}
-          key: "${{ runner.os }}-${{ env.COMPILER }}-${{ env.QT_VER }}-${{ env.VULKAN_SDK_SHA }}-${{ env.CCACHE_SHA }}-${{ hashFiles('llvm.lock') }}-${{ hashFiles('glslang.lock') }}"
+          key: "${{ runner.os }}-${{ env.COMPILER }}-${{ env.QT_VER }}-${{ env.VULKAN_SDK_SHA }}-${{ env.CCACHE_SHA }}-${{ hashFiles('llvm.lock') }}"
           restore-keys: ${{ runner.os }}-${{ env.COMPILER }}-
 
       - name: Download and unpack dependencies
-        run: .ci/setup-windows.sh
+        run: |
+          .ci/setup-windows.sh
+          .ci/setup-windows-ci-vars.sh win64 msvc
 
       - name: Export Variables
         run: |
@@ -165,7 +282,12 @@ jobs:
 
       - name: Compile RPCS3
         shell: pwsh
-        run: msbuild rpcs3.sln /p:Configuration=Release /v:minimal /p:Platform=x64 /p:CLToolPath=${{ env.CCACHE_BIN_DIR }} /p:UseMultiToolTask=true /p:CustomAfterMicrosoftCommonTargets="${{ github.workspace }}\buildfiles\msvc\ci_only.targets"
+        run: msbuild rpcs3.sln /p:Configuration=Release /v:minimal /p:Platform=x64 /p:PreferredToolArchitecture=x64 /p:CLToolPath=${{ env.CCACHE_BIN_DIR }} /p:UseMultiToolTask=true /p:CustomAfterMicrosoftCommonTargets="${{ github.workspace }}\buildfiles\msvc\ci_only.targets"
+
+      - name: Run Unit Tests
+        if: github.event_name == 'pull_request'
+        shell: pwsh
+        run: build\lib\Release-x64\rpcs3_test.exe
 
       - name: Pack up build artifacts
         run: |
@@ -188,3 +310,135 @@ jobs:
         env:
           RPCS3_TOKEN: ${{ secrets.RPCS3_TOKEN }}
         run: .ci/github-upload.sh
+
+      - name: Save Build Ccache
+        if: github.ref == 'refs/heads/master'
+        uses: actions/cache/save@main
+        with:
+          path: ${{ env.CCACHE_DIR }}
+          key: ${{ steps.restore-build-ccache.outputs.cache-primary-key }}
+
+      - name: Save Dependencies Cache
+        if: github.ref == 'refs/heads/master'
+        uses: actions/cache/save@main
+        with:
+          path: ${{ env.DEPS_CACHE_DIR }}
+          key: ${{ steps.restore-dependencies-cache.outputs.cache-primary-key }}
+
+  Windows_Build_Clang:
+    # Only run push event on master branch of main repo, but run all PRs
+    if: github.event_name != 'push' || (github.repository == 'RPCS3/rpcs3' && github.ref_name == 'master')
+    name: RPCS3 Windows Clang
+    runs-on: windows-2025
+    strategy:
+      matrix:
+        include:
+          - msys2: clang64
+            compiler: clang
+            arch: win64
+    env:
+      CCACHE_DIR: 'C:\ccache'
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@main
+        with:
+          fetch-depth: 0
+
+      - name: Setup msys2
+        uses: msys2/setup-msys2@v2
+        with:
+          msystem: ${{ matrix.msys2 }}
+          update: true
+          cache: true
+          install: |
+            mingw-w64-clang-x86_64-clang
+            mingw-w64-clang-x86_64-ccache
+            mingw-w64-clang-x86_64-cmake
+            mingw-w64-clang-x86_64-lld
+            mingw-w64-clang-x86_64-ninja
+            mingw-w64-clang-x86_64-llvm
+            mingw-w64-clang-x86_64-ffmpeg
+            mingw-w64-clang-x86_64-opencv
+            mingw-w64-clang-x86_64-glew
+            mingw-w64-clang-x86_64-vulkan
+            mingw-w64-clang-x86_64-vulkan-headers
+            mingw-w64-clang-x86_64-vulkan-loader
+            mingw-w64-clang-x86_64-gtest
+            mingw-w64-clang-x86_64-qt6-base
+            mingw-w64-clang-x86_64-qt6-declarative
+            mingw-w64-clang-x86_64-qt6-multimedia
+            mingw-w64-clang-x86_64-qt6-svg
+            base-devel
+            curl
+            git
+            p7zip
+
+      - name: Restore build Ccache
+        uses: actions/cache/restore@main
+        id: restore-build-ccache
+        with:
+          path: ${{ env.CCACHE_DIR }}
+          key: ${{ runner.os }}-ccache-${{ matrix.compiler }}-${{ runner.arch }}-${{ github.run_id }}
+          restore-keys: ${{ runner.os }}-ccache-${{ matrix.compiler }}-${{ runner.arch }}-
+
+      - name: Build RPCS3
+        shell: msys2 {0}
+        run: |
+          export CCACHE_DIR=$(cygpath -u "$CCACHE_DIR")
+          echo "CCACHE_DIR=$CCACHE_DIR"
+          .ci/setup-windows-ci-vars.sh ${{ matrix.arch }} ${{ matrix.compiler }}
+          .ci/build-windows-clang.sh
+
+      - name: Save build Ccache
+        if: github.ref == 'refs/heads/master'
+        uses: actions/cache/save@main
+        with:
+          path: ${{ env.CCACHE_DIR }}
+          key: ${{ steps.restore-build-ccache.outputs.cache-primary-key }}
+
+      - name: Upload artifacts
+        uses: actions/upload-artifact@main
+        with:
+          name: RPCS3 for Windows (${{ runner.arch }}, ${{ matrix.compiler }})
+          path: ${{ env.BUILD_ARTIFACTSTAGINGDIRECTORY }}
+          compression-level: 0
+          if-no-files-found: error
+
+  FreeBSD_Build:
+      # Only run push event on master branch of main repo, but run all PRs
+    if: github.event_name != 'push' || (github.repository == 'RPCS3/rpcs3' && github.ref_name == 'master')
+    name: RPCS3 FreeBSD 
+    runs-on: ubuntu-latest
+    timeout-minutes: 60
+    env:
+      CCACHE_DIR: ${{ github.workspace }}/ccache
+      QT_VER_MAIN: '6'
+      LLVM_COMPILER_VER: '19'
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@main
+        with:
+          fetch-depth: 0
+
+      - name: Restore Build Ccache
+        uses: actions/cache/restore@main
+        id: restore-build-ccache
+        with:
+          path: ${{ env.CCACHE_DIR }}
+          key: FreeBSD-ccache-${{github.run_id}}
+          restore-keys: FreeBSD-ccache-
+
+      - name: FreeBSD build
+        id: root
+        uses: vmactions/freebsd-vm@v1
+        with:
+          envs: 'QT_VER_MAIN LLVM_COMPILER_VER CCACHE_DIR'
+          usesh: true
+          run: .ci/install-freebsd.sh && .ci/build-freebsd.sh
+
+      - name: Save Build Ccache
+        if: github.ref == 'refs/heads/master'
+        uses: actions/cache/save@main
+        with:
+          path: ${{ env.CCACHE_DIR }}
+          key: ${{ steps.restore-build-ccache.outputs.cache-primary-key }}

.gitignore

@@ -35,6 +35,7 @@
 /lib
 /tmp
 /ipch
+/packages
 /rpcs3/Debug
 /rpcs3/Release
 
@@ -55,9 +56,6 @@
 /bin/GuiConfigs/*.dat
 /bin/GuiConfigs/*.dat.*
 
-# Some data from git
-!/bin/git/
-
 # Visual Studio Files
 .vs/*
 .vscode/*

.gitmodules

@@ -106,5 +106,5 @@
 	ignore = dirty
 [submodule "3rdparty/GPUOpen/VulkanMemoryAllocator"]
 	path = 3rdparty/GPUOpen/VulkanMemoryAllocator
-	url = ../../Megamouse/VulkanMemoryAllocator.git
+	url = ../../GPUOpen-LibrariesAndSDKs/VulkanMemoryAllocator.git
 	ignore = dirty

3rdparty/CMakeLists.txt

@@ -131,7 +131,14 @@ add_subdirectory(stblib)
 add_subdirectory(discord-rpc)
 
 # Cubeb
-add_subdirectory(cubeb EXCLUDE_FROM_ALL)
+if(USE_SYSTEM_CUBEB)
+	find_package(cubeb REQUIRED GLOBAL)
+	message(STATUS "Using system cubeb version '${cubeb_VERSION}'")
+	add_library(3rdparty::cubeb ALIAS cubeb::cubeb)
+else()
+	message(STATUS "Using static cubeb from 3rdparty")
+	add_subdirectory(cubeb EXCLUDE_FROM_ALL)
+endif()
 
 # SoundTouch
 add_subdirectory(SoundTouch EXCLUDE_FROM_ALL)
@@ -193,9 +200,6 @@ if(USE_VULKAN)
 			if (WAYLAND_FOUND)
 				target_include_directories(3rdparty_vulkan
 					INTERFACE ${WAYLAND_INCLUDE_DIR})
-
-				target_compile_definitions(3rdparty_vulkan
-					INTERFACE -DVK_USE_PLATFORM_WAYLAND_KHR)
 			endif()
 		endif()
 
@@ -211,6 +215,29 @@ endif()
 # AsmJit
 add_subdirectory(asmjit EXCLUDE_FROM_ALL)
 
+# SDL3
+set(SDL3_TARGET 3rdparty_dummy_lib)
+if(USE_SDL)
+	if(USE_SYSTEM_SDL)
+		find_package(SDL3)
+		if(SDL3_FOUND AND SDL3_VERSION VERSION_GREATER_EQUAL 3.2.0)
+			message(STATUS "Using system SDL3 version '${SDL3_VERSION}'")
+			add_library(3rdparty_sdl3 INTERFACE)
+			target_compile_definitions(3rdparty_sdl3 INTERFACE -DHAVE_SDL3=1)
+			target_link_libraries(3rdparty_sdl3 INTERFACE SDL3::SDL3)
+			set(SDL3_TARGET 3rdparty_sdl3)
+		else()
+			message(FATAL_ERROR "SDL3 is not available on this system")
+		endif()
+	else()
+		message(STATUS "Using static SDL3 from 3rdparty")
+		add_subdirectory(libsdl-org EXCLUDE_FROM_ALL)
+		target_compile_definitions(SDL3-static INTERFACE -DHAVE_SDL3=1)
+		set(SDL3_TARGET SDL3-static)
+		set(SDL3_DIR "${CMAKE_CURRENT_BINARY_DIR}/libsdl-org/SDL" CACHE STRING "")
+	endif()
+endif()
+
 # OpenAL
 if (NOT ANDROID)
 	add_subdirectory(OpenAL EXCLUDE_FROM_ALL)
@@ -225,31 +252,31 @@ if(USE_FAUDIO)
 	# FAudio depends on SDL3
 	find_package(SDL3)
 	if (USE_SYSTEM_FAUDIO)
-		if (NOT SDL3_FOUND OR SDL3_VERSION VERSION_LESS 3.2.0)
-			message(WARNING
-				"RPCS3: System FAudio requires SDL 3.2.0 or newer. Since a valid SDL3"
-				">=3.2.0 version cannot be found, building with FAudio will be skipped.")
-			set(USE_FAUDIO OFF CACHE BOOL "Disabled using system FAudio with SDL < 3.2.0" FORCE)
-		else()
+		if (SDL3_FOUND AND SDL3_VERSION VERSION_GREATER_EQUAL 3.2.0)
 			message(STATUS "RPCS3: Using system FAudio")
 			find_package(FAudio REQUIRED CONFIGS FAudioConfig.cmake FAudio-config.cmake)
 			add_library(3rdparty_FAudio INTERFACE)
 			target_link_libraries(3rdparty_FAudio INTERFACE FAudio)
 			target_compile_definitions(3rdparty_FAudio INTERFACE -DHAVE_FAUDIO)
 			set(FAUDIO_TARGET 3rdparty_FAudio)
+		else()
+			message(WARNING
+				"RPCS3: System FAudio requires SDL 3.2.0 or newer. Since a valid SDL3"
+				">=3.2.0 version cannot be found, building with FAudio will be skipped.")
+			set(USE_FAUDIO OFF CACHE BOOL "Disabled using system FAudio with SDL < 3.2.0" FORCE)
 		endif()
 	else()
-		if (NOT SDL3_FOUND OR SDL3_VERSION VERSION_LESS 3.2.0)
-			message(WARNING
-				"-- RPCS3: 3rdparty FAudio requires SDL 3.2.0 or newer. Since a valid SDL3"
-				">=3.2.0 version cannot be found, building with FAudio will be skipped.")
-			set(USE_FAUDIO OFF CACHE BOOL "Disabled FAudio with SDL < 3.2.0" FORCE)
-		else()
+		if (SDL3_FOUND AND SDL3_VERSION VERSION_GREATER_EQUAL 3.2.0)
 			message(STATUS "RPCS3: Using builtin FAudio")
 			set(BUILD_SHARED_LIBS OFF CACHE BOOL "Build shared library")
 			add_subdirectory(FAudio EXCLUDE_FROM_ALL)
 			target_compile_definitions(FAudio-static INTERFACE -DHAVE_FAUDIO)
 			set(FAUDIO_TARGET FAudio-static)
+		else()
+			message(FATAL_ERROR
+				"-- RPCS3: 3rdparty FAudio requires SDL 3.2.0 or newer. Since a valid SDL3"
+				">=3.2.0 version cannot be found, building with FAudio will be skipped.")
+			set(USE_FAUDIO OFF CACHE BOOL "Disabled FAudio with SDL < 3.2.0" FORCE)
 		endif()
 	endif()
 endif()
@@ -318,29 +345,6 @@ add_subdirectory(wolfssl EXCLUDE_FROM_ALL)
 # CURL
 add_subdirectory(curl EXCLUDE_FROM_ALL)
 
-# SDL3
-set(SDL3_TARGET 3rdparty_dummy_lib)
-if(USE_SDL)
-	if(USE_SYSTEM_SDL)
-		find_package(SDL3)
-		if(SDL3_FOUND AND NOT SDL3_VERSION VERSION_LESS 3.2.0)
-			message(STATUS "Using system SDL3 version '${SDL3_VERSION}'")
-			add_library(3rdparty_sdl3 INTERFACE)
-			target_compile_definitions(3rdparty_sdl3 INTERFACE -DHAVE_SDL3=1)
-			target_link_libraries(3rdparty_sdl3 INTERFACE SDL3::SDL3)
-			set(SDL3_TARGET 3rdparty_sdl3)
-		else()
-			message(FATAL_ERROR "SDL3 is not available on this system")
-		endif()
-	else()
-		message(STATUS "Using static SDL3 from 3rdparty")
-		add_library(3rdparty_sdl3 INTERFACE)
-		target_compile_definitions(3rdparty_sdl3 INTERFACE -DHAVE_SDL3=1)
-		add_subdirectory(libsdl-org EXCLUDE_FROM_ALL)
-		set(SDL3_TARGET 3rdparty_sdl3)
-	endif()
-endif()
-
 # MINIUPNP
 add_subdirectory(miniupnp EXCLUDE_FROM_ALL)
 

3rdparty/FAudio

@@ -1 +1 @@
-Subproject commit 486e33eef3f282e4ce3d29f32ded3e67bacdbe5c
+Subproject commit 6077ea740a7114a54f76ed9b7abe08cffc0034b6

3rdparty/GL/glext.h

@@ -32,7 +32,7 @@ extern "C" {
 #define GLAPI extern
 #endif
 
-#define GL_GLEXT_VERSION 20220530
+#define GL_GLEXT_VERSION 20250203
 
 #include <KHR/khrplatform.h>
 
@@ -5397,12 +5397,12 @@ typedef void (APIENTRY  *GLDEBUGPROCAMD)(GLuint id,GLenum category,GLenum severi
 typedef void (APIENTRYP PFNGLDEBUGMESSAGEENABLEAMDPROC) (GLenum category, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
 typedef void (APIENTRYP PFNGLDEBUGMESSAGEINSERTAMDPROC) (GLenum category, GLenum severity, GLuint id, GLsizei length, const GLchar *buf);
 typedef void (APIENTRYP PFNGLDEBUGMESSAGECALLBACKAMDPROC) (GLDEBUGPROCAMD callback, void *userParam);
-typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGAMDPROC) (GLuint count, GLsizei bufSize, GLenum *categories, GLuint *severities, GLuint *ids, GLsizei *lengths, GLchar *message);
+typedef GLuint (APIENTRYP PFNGLGETDEBUGMESSAGELOGAMDPROC) (GLuint count, GLsizei bufSize, GLenum *categories, GLenum *severities, GLuint *ids, GLsizei *lengths, GLchar *message);
 #ifdef GL_GLEXT_PROTOTYPES
 GLAPI void APIENTRY glDebugMessageEnableAMD (GLenum category, GLenum severity, GLsizei count, const GLuint *ids, GLboolean enabled);
 GLAPI void APIENTRY glDebugMessageInsertAMD (GLenum category, GLenum severity, GLuint id, GLsizei length, const GLchar *buf);
 GLAPI void APIENTRY glDebugMessageCallbackAMD (GLDEBUGPROCAMD callback, void *userParam);
-GLAPI GLuint APIENTRY glGetDebugMessageLogAMD (GLuint count, GLsizei bufSize, GLenum *categories, GLuint *severities, GLuint *ids, GLsizei *lengths, GLchar *message);
+GLAPI GLuint APIENTRY glGetDebugMessageLogAMD (GLuint count, GLsizei bufSize, GLenum *categories, GLenum *severities, GLuint *ids, GLsizei *lengths, GLchar *message);
 #endif
 #endif /* GL_AMD_debug_output */
 
@@ -7370,6 +7370,16 @@ GLAPI void APIENTRY glBlitFramebufferEXT (GLint srcX0, GLint srcY0, GLint srcX1,
 #endif
 #endif /* GL_EXT_framebuffer_blit */
 
+#ifndef GL_EXT_framebuffer_blit_layers
+#define GL_EXT_framebuffer_blit_layers 1
+typedef void (APIENTRYP PFNGLBLITFRAMEBUFFERLAYERSEXTPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+typedef void (APIENTRYP PFNGLBLITFRAMEBUFFERLAYEREXTPROC) (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint srcLayer, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLint dstLayer, GLbitfield mask, GLenum filter);
+#ifdef GL_GLEXT_PROTOTYPES
+GLAPI void APIENTRY glBlitFramebufferLayersEXT (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLbitfield mask, GLenum filter);
+GLAPI void APIENTRY glBlitFramebufferLayerEXT (GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1, GLint srcLayer, GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1, GLint dstLayer, GLbitfield mask, GLenum filter);
+#endif
+#endif /* GL_EXT_framebuffer_blit_layers */
+
 #ifndef GL_EXT_framebuffer_multisample
 #define GL_EXT_framebuffer_multisample 1
 #define GL_RENDERBUFFER_SAMPLES_EXT       0x8CAB
@@ -9394,6 +9404,11 @@ GLAPI void APIENTRY glResizeBuffersMESA (void);
 #define GL_MESA_shader_integer_functions 1
 #endif /* GL_MESA_shader_integer_functions */
 
+#ifndef GL_MESA_texture_const_bandwidth
+#define GL_MESA_texture_const_bandwidth 1
+#define GL_CONST_BW_TILING_MESA           0x8BBE
+#endif /* GL_MESA_texture_const_bandwidth */
+
 #ifndef GL_MESA_tile_raster_order
 #define GL_MESA_tile_raster_order 1
 #define GL_TILE_RASTER_ORDER_FIXED_MESA   0x8BB8
@@ -10248,12 +10263,6 @@ typedef void (APIENTRYP PFNGLMULTITEXCOORD3HNVPROC) (GLenum target, GLhalfNV s,
 typedef void (APIENTRYP PFNGLMULTITEXCOORD3HVNVPROC) (GLenum target, const GLhalfNV *v);
 typedef void (APIENTRYP PFNGLMULTITEXCOORD4HNVPROC) (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
 typedef void (APIENTRYP PFNGLMULTITEXCOORD4HVNVPROC) (GLenum target, const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLFOGCOORDHNVPROC) (GLhalfNV fog);
-typedef void (APIENTRYP PFNGLFOGCOORDHVNVPROC) (const GLhalfNV *fog);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
-typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HVNVPROC) (const GLhalfNV *v);
-typedef void (APIENTRYP PFNGLVERTEXWEIGHTHNVPROC) (GLhalfNV weight);
-typedef void (APIENTRYP PFNGLVERTEXWEIGHTHVNVPROC) (const GLhalfNV *weight);
 typedef void (APIENTRYP PFNGLVERTEXATTRIB1HNVPROC) (GLuint index, GLhalfNV x);
 typedef void (APIENTRYP PFNGLVERTEXATTRIB1HVNVPROC) (GLuint index, const GLhalfNV *v);
 typedef void (APIENTRYP PFNGLVERTEXATTRIB2HNVPROC) (GLuint index, GLhalfNV x, GLhalfNV y);
@@ -10266,6 +10275,12 @@ typedef void (APIENTRYP PFNGLVERTEXATTRIBS1HVNVPROC) (GLuint index, GLsizei n, c
 typedef void (APIENTRYP PFNGLVERTEXATTRIBS2HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
 typedef void (APIENTRYP PFNGLVERTEXATTRIBS3HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
 typedef void (APIENTRYP PFNGLVERTEXATTRIBS4HVNVPROC) (GLuint index, GLsizei n, const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLFOGCOORDHNVPROC) (GLhalfNV fog);
+typedef void (APIENTRYP PFNGLFOGCOORDHVNVPROC) (const GLhalfNV *fog);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HNVPROC) (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
+typedef void (APIENTRYP PFNGLSECONDARYCOLOR3HVNVPROC) (const GLhalfNV *v);
+typedef void (APIENTRYP PFNGLVERTEXWEIGHTHNVPROC) (GLhalfNV weight);
+typedef void (APIENTRYP PFNGLVERTEXWEIGHTHVNVPROC) (const GLhalfNV *weight);
 #ifdef GL_GLEXT_PROTOTYPES
 GLAPI void APIENTRY glVertex2hNV (GLhalfNV x, GLhalfNV y);
 GLAPI void APIENTRY glVertex2hvNV (const GLhalfNV *v);
@@ -10295,12 +10310,6 @@ GLAPI void APIENTRY glMultiTexCoord3hNV (GLenum target, GLhalfNV s, GLhalfNV t,
 GLAPI void APIENTRY glMultiTexCoord3hvNV (GLenum target, const GLhalfNV *v);
 GLAPI void APIENTRY glMultiTexCoord4hNV (GLenum target, GLhalfNV s, GLhalfNV t, GLhalfNV r, GLhalfNV q);
 GLAPI void APIENTRY glMultiTexCoord4hvNV (GLenum target, const GLhalfNV *v);
-GLAPI void APIENTRY glFogCoordhNV (GLhalfNV fog);
-GLAPI void APIENTRY glFogCoordhvNV (const GLhalfNV *fog);
-GLAPI void APIENTRY glSecondaryColor3hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
-GLAPI void APIENTRY glSecondaryColor3hvNV (const GLhalfNV *v);
-GLAPI void APIENTRY glVertexWeighthNV (GLhalfNV weight);
-GLAPI void APIENTRY glVertexWeighthvNV (const GLhalfNV *weight);
 GLAPI void APIENTRY glVertexAttrib1hNV (GLuint index, GLhalfNV x);
 GLAPI void APIENTRY glVertexAttrib1hvNV (GLuint index, const GLhalfNV *v);
 GLAPI void APIENTRY glVertexAttrib2hNV (GLuint index, GLhalfNV x, GLhalfNV y);
@@ -10313,6 +10322,12 @@ GLAPI void APIENTRY glVertexAttribs1hvNV (GLuint index, GLsizei n, const GLhalfN
 GLAPI void APIENTRY glVertexAttribs2hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
 GLAPI void APIENTRY glVertexAttribs3hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
 GLAPI void APIENTRY glVertexAttribs4hvNV (GLuint index, GLsizei n, const GLhalfNV *v);
+GLAPI void APIENTRY glFogCoordhNV (GLhalfNV fog);
+GLAPI void APIENTRY glFogCoordhvNV (const GLhalfNV *fog);
+GLAPI void APIENTRY glSecondaryColor3hNV (GLhalfNV red, GLhalfNV green, GLhalfNV blue);
+GLAPI void APIENTRY glSecondaryColor3hvNV (const GLhalfNV *v);
+GLAPI void APIENTRY glVertexWeighthNV (GLhalfNV weight);
+GLAPI void APIENTRY glVertexWeighthvNV (const GLhalfNV *weight);
 #endif
 #endif /* GL_NV_half_float */
 
@@ -11449,6 +11464,10 @@ GLAPI void APIENTRY glDrawTransformFeedbackNV (GLenum mode, GLuint id);
 #endif
 #endif /* GL_NV_transform_feedback2 */
 
+#ifndef GL_NV_uniform_buffer_std430_layout
+#define GL_NV_uniform_buffer_std430_layout 1
+#endif /* GL_NV_uniform_buffer_std430_layout */
+
 #ifndef GL_NV_uniform_buffer_unified_memory
 #define GL_NV_uniform_buffer_unified_memory 1
 #define GL_UNIFORM_BUFFER_UNIFIED_NV      0x936E
@@ -11964,8 +11983,10 @@ GLAPI void APIENTRY glViewportSwizzleNV (GLuint index, GLenum swizzlex, GLenum s
 #define GL_MAX_VIEWS_OVR                  0x9631
 #define GL_FRAMEBUFFER_INCOMPLETE_VIEW_TARGETS_OVR 0x9633
 typedef void (APIENTRYP PFNGLFRAMEBUFFERTEXTUREMULTIVIEWOVRPROC) (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint baseViewIndex, GLsizei numViews);
+typedef void (APIENTRYP PFNGLNAMEDFRAMEBUFFERTEXTUREMULTIVIEWOVRPROC) (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint baseViewIndex, GLsizei numViews);
 #ifdef GL_GLEXT_PROTOTYPES
 GLAPI void APIENTRY glFramebufferTextureMultiviewOVR (GLenum target, GLenum attachment, GLuint texture, GLint level, GLint baseViewIndex, GLsizei numViews);
+GLAPI void APIENTRY glNamedFramebufferTextureMultiviewOVR (GLuint framebuffer, GLenum attachment, GLuint texture, GLint level, GLint baseViewIndex, GLsizei numViews);
 #endif
 #endif /* GL_OVR_multiview */
 

3rdparty/GPUOpen/VulkanMemoryAllocator

@@ -1 +1 @@
-Subproject commit 37064843398c69cc0ca7f8cf5b33128c03a2bd74
+Subproject commit 1d8f600fd424278486eade7ed3e877c99f0846b1

3rdparty/MoltenVK/CMakeLists.txt

@@ -1,10 +1,9 @@
-cmake_minimum_required(VERSION 2.8.12)
 project(moltenvk NONE)
 include(ExternalProject)
 
 ExternalProject_Add(moltenvk
 	GIT_REPOSITORY https://github.com/KhronosGroup/MoltenVK.git
-	GIT_TAG 81541f6
+	GIT_TAG 49b97f2
 	BUILD_IN_SOURCE 1
 	SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/MoltenVK
 	CONFIGURE_COMMAND "${CMAKE_CURRENT_SOURCE_DIR}/MoltenVK/fetchDependencies" --macos

3rdparty/OpenAL/CMakeLists.txt

@@ -11,6 +11,7 @@ if(USE_SYSTEM_OPENAL)
 else()
     option(ALSOFT_UTILS "Build utility programs" OFF)
     option(ALSOFT_EXAMPLES "Build example programs" OFF)
+    set(LIBTYPE "STATIC")
     add_subdirectory(openal-soft EXCLUDE_FROM_ALL)
     add_library(3rdparty_openal INTERFACE)
     target_link_libraries(3rdparty_openal INTERFACE OpenAL::OpenAL)

3rdparty/OpenAL/openal-soft

@@ -1 +1 @@
-Subproject commit 90191edd20bb877c5cbddfdac7ec0fe49ad93727
+Subproject commit dc7d7054a5b4f3bec1dc23a42fd616a0847af948

3rdparty/SoundTouch/soundtouch

@@ -1 +1 @@
-Subproject commit 394e1f58b23dc80599214d2e9b6a5e0dfd0bbe07
+Subproject commit 3982730833b6daefe77dcfb32b5c282851640c17

3rdparty/curl/CMakeLists.txt

@@ -26,8 +26,8 @@ else()
 	endif()
 	set(CURL_USE_LIBSSH2 OFF CACHE BOOL "Use libSSH2")
 	set(CURL_USE_LIBPSL OFF CACHE BOOL "Use libPSL")
-
-	set(CURL_DISABLE_TESTS ON)
+	option(BUILD_TESTING "Build tests" OFF)
+	option(BUILD_EXAMPLES "Build libcurl examples" OFF)
 
 	add_subdirectory(curl EXCLUDE_FROM_ALL)
 

3rdparty/curl/curl

@@ -1 +1 @@
-Subproject commit 57495c64871d18905a0941db9196ef90bafe9a29
+Subproject commit 4dacb79fcdd9364c1083e06f6a011d797a344f47

3rdparty/curl/libcurl.vcxproj

@@ -62,8 +62,8 @@
     <ClCompile Include="curl\lib\altsvc.c" />
     <ClCompile Include="curl\lib\amigaos.c" />
     <ClCompile Include="curl\lib\asyn-ares.c" />
-    <ClCompile Include="curl\lib\asyn-thread.c" />
-    <ClCompile Include="curl\lib\base64.c" />
+    <ClCompile Include="curl\lib\asyn-base.c" />
+    <ClCompile Include="curl\lib\asyn-thrdd.c" />
     <ClCompile Include="curl\lib\bufq.c" />
     <ClCompile Include="curl\lib\bufref.c" />
     <ClCompile Include="curl\lib\cf-h1-proxy.c" />
@@ -76,6 +76,18 @@
     <ClCompile Include="curl\lib\connect.c" />
     <ClCompile Include="curl\lib\content_encoding.c" />
     <ClCompile Include="curl\lib\cookie.c" />
+    <ClCompile Include="curl\lib\cshutdn.c" />
+    <ClCompile Include="curl\lib\curlx\base64.c" />
+    <ClCompile Include="curl\lib\curlx\dynbuf.c" />
+    <ClCompile Include="curl\lib\curlx\inet_pton.c" />
+    <ClCompile Include="curl\lib\curlx\multibyte.c" />
+    <ClCompile Include="curl\lib\curlx\nonblock.c" />
+    <ClCompile Include="curl\lib\curlx\strparse.c" />
+    <ClCompile Include="curl\lib\curlx\timediff.c" />
+    <ClCompile Include="curl\lib\curlx\timeval.c" />
+    <ClCompile Include="curl\lib\curlx\version_win32.c" />
+    <ClCompile Include="curl\lib\curlx\warnless.c" />
+    <ClCompile Include="curl\lib\curlx\winapi.c" />
     <ClCompile Include="curl\lib\curl_addrinfo.c" />
     <ClCompile Include="curl\lib\curl_des.c" />
     <ClCompile Include="curl\lib\curl_endian.c" />
@@ -84,7 +96,6 @@
     <ClCompile Include="curl\lib\curl_get_line.c" />
     <ClCompile Include="curl\lib\curl_gssapi.c" />
     <ClCompile Include="curl\lib\curl_memrchr.c" />
-    <ClCompile Include="curl\lib\curl_multibyte.c" />
     <ClCompile Include="curl\lib\curl_ntlm_core.c" />
     <ClCompile Include="curl\lib\curl_range.c" />
     <ClCompile Include="curl\lib\curl_rtmp.c" />
@@ -94,14 +105,16 @@
     <ClCompile Include="curl\lib\curl_threads.c" />
     <ClCompile Include="curl\lib\curl_trc.c" />
     <ClCompile Include="curl\lib\cw-out.c" />
+    <ClCompile Include="curl\lib\cw-pause.c" />
     <ClCompile Include="curl\lib\dict.c" />
+    <ClCompile Include="curl\lib\dllmain.c" />
     <ClCompile Include="curl\lib\doh.c" />
-    <ClCompile Include="curl\lib\dynbuf.c" />
     <ClCompile Include="curl\lib\dynhds.c" />
     <ClCompile Include="curl\lib\easy.c" />
     <ClCompile Include="curl\lib\easygetopt.c" />
     <ClCompile Include="curl\lib\easyoptions.c" />
     <ClCompile Include="curl\lib\escape.c" />
+    <ClCompile Include="curl\lib\fake_addrinfo.c" />
     <ClCompile Include="curl\lib\file.c" />
     <ClCompile Include="curl\lib\fileinfo.c" />
     <ClCompile Include="curl\lib\fopen.c" />
@@ -114,11 +127,9 @@
     <ClCompile Include="curl\lib\hash.c" />
     <ClCompile Include="curl\lib\headers.c" />
     <ClCompile Include="curl\lib\hmac.c" />
-    <ClCompile Include="curl\lib\hostasyn.c" />
     <ClCompile Include="curl\lib\hostip.c" />
     <ClCompile Include="curl\lib\hostip4.c" />
     <ClCompile Include="curl\lib\hostip6.c" />
-    <ClCompile Include="curl\lib\hostsyn.c" />
     <ClCompile Include="curl\lib\hsts.c" />
     <ClCompile Include="curl\lib\http.c" />
     <ClCompile Include="curl\lib\http1.c" />
@@ -134,10 +145,10 @@
     <ClCompile Include="curl\lib\if2ip.c" />
     <ClCompile Include="curl\lib\imap.c" />
     <ClCompile Include="curl\lib\inet_ntop.c" />
-    <ClCompile Include="curl\lib\inet_pton.c" />
     <ClCompile Include="curl\lib\krb5.c" />
     <ClCompile Include="curl\lib\ldap.c" />
     <ClCompile Include="curl\lib\llist.c" />
+    <ClCompile Include="curl\lib\macos.c" />
     <ClCompile Include="curl\lib\md4.c" />
     <ClCompile Include="curl\lib\md5.c" />
     <ClCompile Include="curl\lib\memdebug.c" />
@@ -145,8 +156,8 @@
     <ClCompile Include="curl\lib\mprintf.c" />
     <ClCompile Include="curl\lib\mqtt.c" />
     <ClCompile Include="curl\lib\multi.c" />
+    <ClCompile Include="curl\lib\multi_ev.c" />
     <ClCompile Include="curl\lib\netrc.c" />
-    <ClCompile Include="curl\lib\nonblock.c" />
     <ClCompile Include="curl\lib\noproxy.c" />
     <ClCompile Include="curl\lib\openldap.c" />
     <ClCompile Include="curl\lib\parsedate.c" />
@@ -174,21 +185,20 @@
     <ClCompile Include="curl\lib\splay.c" />
     <ClCompile Include="curl\lib\strcase.c" />
     <ClCompile Include="curl\lib\strdup.c" />
+    <ClCompile Include="curl\lib\strequal.c" />
     <ClCompile Include="curl\lib\strerror.c" />
-    <ClCompile Include="curl\lib\strparse.c" />
-    <ClCompile Include="curl\lib\strtok.c" />
-    <ClCompile Include="curl\lib\strtoofft.c" />
     <ClCompile Include="curl\lib\system_win32.c" />
     <ClCompile Include="curl\lib\telnet.c" />
     <ClCompile Include="curl\lib\tftp.c" />
-    <ClCompile Include="curl\lib\timediff.c" />
-    <ClCompile Include="curl\lib\timeval.c" />
     <ClCompile Include="curl\lib\transfer.c" />
+    <ClCompile Include="curl\lib\uint-bset.c" />
+    <ClCompile Include="curl\lib\uint-hash.c" />
+    <ClCompile Include="curl\lib\uint-spbset.c" />
+    <ClCompile Include="curl\lib\uint-table.c" />
     <ClCompile Include="curl\lib\url.c" />
     <ClCompile Include="curl\lib\urlapi.c" />
     <ClCompile Include="curl\lib\vauth\gsasl.c" />
     <ClCompile Include="curl\lib\version.c" />
-    <ClCompile Include="curl\lib\version_win32.c" />
     <ClCompile Include="curl\lib\vquic\curl_msh3.c" />
     <ClCompile Include="curl\lib\vquic\curl_ngtcp2.c" />
     <ClCompile Include="curl\lib\vquic\curl_quiche.c" />
@@ -198,7 +208,6 @@
     <ClCompile Include="curl\lib\vtls\vtls_scache.c" />
     <ClCompile Include="curl\lib\vtls\vtls_spack.c" />
     <ClCompile Include="curl\lib\vtls\x509asn1.c" />
-    <ClCompile Include="curl\lib\warnless.c" />
     <ClCompile Include="curl\lib\vauth\cleartext.c" />
     <ClCompile Include="curl\lib\vauth\cram.c" />
     <ClCompile Include="curl\lib\vauth\digest.c" />
@@ -260,9 +269,20 @@
     <ClInclude Include="curl\lib\connect.h" />
     <ClInclude Include="curl\lib\content_encoding.h" />
     <ClInclude Include="curl\lib\cookie.h" />
-    <ClInclude Include="curl\lib\curlx.h" />
+    <ClInclude Include="curl\lib\cshutdn.h" />
+    <ClInclude Include="curl\lib\curlx\base64.h" />
+    <ClInclude Include="curl\lib\curlx\curlx.h" />
+    <ClInclude Include="curl\lib\curlx\dynbuf.h" />
+    <ClInclude Include="curl\lib\curlx\inet_pton.h" />
+    <ClInclude Include="curl\lib\curlx\multibyte.h" />
+    <ClInclude Include="curl\lib\curlx\nonblock.h" />
+    <ClInclude Include="curl\lib\curlx\strparse.h" />
+    <ClInclude Include="curl\lib\curlx\timediff.h" />
+    <ClInclude Include="curl\lib\curlx\timeval.h" />
+    <ClInclude Include="curl\lib\curlx\version_win32.h" />
+    <ClInclude Include="curl\lib\curlx\warnless.h" />
+    <ClInclude Include="curl\lib\curlx\winapi.h" />
     <ClInclude Include="curl\lib\curl_addrinfo.h" />
-    <ClInclude Include="curl\lib\curl_base64.h" />
     <ClInclude Include="curl\lib\curl_ctype.h" />
     <ClInclude Include="curl\lib\curl_des.h" />
     <ClInclude Include="curl\lib\curl_endian.h" />
@@ -277,7 +297,6 @@
     <ClInclude Include="curl\lib\curl_md5.h" />
     <ClInclude Include="curl\lib\curl_memory.h" />
     <ClInclude Include="curl\lib\curl_memrchr.h" />
-    <ClInclude Include="curl\lib\curl_multibyte.h" />
     <ClInclude Include="curl\lib\curl_ntlm_core.h" />
     <ClInclude Include="curl\lib\curl_printf.h" />
     <ClInclude Include="curl\lib\curl_range.h" />
@@ -291,14 +310,15 @@
     <ClInclude Include="curl\lib\curl_threads.h" />
     <ClInclude Include="curl\lib\curl_trc.h" />
     <ClInclude Include="curl\lib\cw-out.h" />
+    <ClInclude Include="curl\lib\cw-pause.h" />
     <ClInclude Include="curl\lib\dict.h" />
     <ClInclude Include="curl\lib\doh.h" />
-    <ClInclude Include="curl\lib\dynbuf.h" />
     <ClInclude Include="curl\lib\dynhds.h" />
     <ClInclude Include="curl\lib\easyif.h" />
     <ClInclude Include="curl\lib\easyoptions.h" />
     <ClInclude Include="curl\lib\easy_lock.h" />
     <ClInclude Include="curl\lib\escape.h" />
+    <ClInclude Include="curl\lib\fake_addrinfo.h" />
     <ClInclude Include="curl\lib\file.h" />
     <ClInclude Include="curl\lib\fileinfo.h" />
     <ClInclude Include="curl\lib\fopen.h" />
@@ -326,15 +346,15 @@
     <ClInclude Include="curl\lib\if2ip.h" />
     <ClInclude Include="curl\lib\imap.h" />
     <ClInclude Include="curl\lib\inet_ntop.h" />
-    <ClInclude Include="curl\lib\inet_pton.h" />
     <ClInclude Include="curl\lib\llist.h" />
+    <ClInclude Include="curl\lib\macos.h" />
     <ClInclude Include="curl\lib\memdebug.h" />
     <ClInclude Include="curl\lib\mime.h" />
     <ClInclude Include="curl\lib\mqtt.h" />
     <ClInclude Include="curl\lib\multihandle.h" />
     <ClInclude Include="curl\lib\multiif.h" />
+    <ClInclude Include="curl\lib\multi_ev.h" />
     <ClInclude Include="curl\lib\netrc.h" />
-    <ClInclude Include="curl\lib\nonblock.h" />
     <ClInclude Include="curl\lib\noproxy.h" />
     <ClInclude Include="curl\lib\parsedate.h" />
     <ClInclude Include="curl\lib\pingpong.h" />
@@ -364,19 +384,19 @@
     <ClInclude Include="curl\lib\strcase.h" />
     <ClInclude Include="curl\lib\strdup.h" />
     <ClInclude Include="curl\lib\strerror.h" />
-    <ClInclude Include="curl\lib\strparse.h" />
     <ClInclude Include="curl\lib\strtok.h" />
     <ClInclude Include="curl\lib\strtoofft.h" />
     <ClInclude Include="curl\lib\system_win32.h" />
     <ClInclude Include="curl\lib\telnet.h" />
     <ClInclude Include="curl\lib\tftp.h" />
-    <ClInclude Include="curl\lib\timediff.h" />
-    <ClInclude Include="curl\lib\timeval.h" />
     <ClInclude Include="curl\lib\transfer.h" />
+    <ClInclude Include="curl\lib\uint-bset.h" />
+    <ClInclude Include="curl\lib\uint-hash.h" />
+    <ClInclude Include="curl\lib\uint-spbset.h" />
+    <ClInclude Include="curl\lib\uint-table.h" />
     <ClInclude Include="curl\lib\url.h" />
     <ClInclude Include="curl\lib\urlapi-int.h" />
     <ClInclude Include="curl\lib\urldata.h" />
-    <ClInclude Include="curl\lib\version_win32.h" />
     <ClInclude Include="curl\lib\vquic\curl_msh3.h" />
     <ClInclude Include="curl\lib\vquic\curl_ngtcp2.h" />
     <ClInclude Include="curl\lib\vquic\curl_quiche.h" />
@@ -389,7 +409,6 @@
     <ClInclude Include="curl\lib\vtls\vtls_scache.h" />
     <ClInclude Include="curl\lib\vtls\vtls_spack.h" />
     <ClInclude Include="curl\lib\vtls\x509asn1.h" />
-    <ClInclude Include="curl\lib\warnless.h" />
     <ClInclude Include="curl\lib\vauth\digest.h" />
     <ClInclude Include="curl\lib\vauth\ntlm.h" />
     <ClInclude Include="curl\lib\vauth\vauth.h" />

3rdparty/curl/libcurl.vcxproj.filters

@@ -24,12 +24,6 @@
     <ClCompile Include="curl\lib\asyn-ares.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\asyn-thread.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-    <ClCompile Include="curl\lib\base64.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\bufref.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -69,9 +63,6 @@
     <ClCompile Include="curl\lib\curl_memrchr.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\curl_multibyte.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\curl_ntlm_core.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -132,9 +123,6 @@
     <ClCompile Include="curl\lib\hmac.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\hostasyn.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\hostip.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -144,9 +132,6 @@
     <ClCompile Include="curl\lib\hostip6.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\hostsyn.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\http.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -177,9 +162,6 @@
     <ClCompile Include="curl\lib\inet_ntop.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\inet_pton.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\krb5.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -210,9 +192,6 @@
     <ClCompile Include="curl\lib\netrc.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\nonblock.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\openldap.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -291,12 +270,6 @@
     <ClCompile Include="curl\lib\strerror.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\strtok.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
-    <ClCompile Include="curl\lib\strtoofft.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\system_win32.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -306,9 +279,6 @@
     <ClCompile Include="curl\lib\tftp.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\timeval.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\transfer.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -321,9 +291,6 @@
     <ClCompile Include="curl\lib\version.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\warnless.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\vauth\cleartext.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -402,15 +369,9 @@
     <ClCompile Include="curl\lib\vtls\wolfssl.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\dynbuf.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\mqtt.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\version_win32.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\vquic\vquic.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -444,9 +405,6 @@
     <ClCompile Include="curl\lib\headers.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\timediff.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\fopen.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -510,9 +468,6 @@
     <ClCompile Include="curl\lib\httpsrr.c">
       <Filter>Source Files</Filter>
     </ClCompile>
-    <ClCompile Include="curl\lib\strparse.c">
-      <Filter>Source Files</Filter>
-    </ClCompile>
     <ClCompile Include="curl\lib\vtls\cipher_suite.c">
       <Filter>Source Files</Filter>
     </ClCompile>
@@ -522,6 +477,78 @@
     <ClCompile Include="curl\lib\vtls\vtls_spack.c">
       <Filter>Source Files</Filter>
     </ClCompile>
+    <ClCompile Include="curl\lib\cshutdn.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\cw-pause.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\dllmain.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\macos.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\multi_ev.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\strequal.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\asyn-base.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\asyn-thrdd.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\fake_addrinfo.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\uint-bset.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\uint-hash.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\uint-spbset.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\uint-table.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\base64.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\dynbuf.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\inet_pton.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\multibyte.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\nonblock.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\strparse.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\timediff.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\timeval.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\version_win32.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\warnless.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="curl\lib\curlx\winapi.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
   </ItemGroup>
   <ItemGroup>
     <ClInclude Include="curl\include\curl\curl.h">
@@ -593,15 +620,9 @@
     <ClInclude Include="curl\lib\cookie.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\curlx.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\curl_addrinfo.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\curl_base64.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\curl_ctype.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -641,9 +662,6 @@
     <ClInclude Include="curl\lib\curl_memrchr.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\curl_multibyte.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\curl_ntlm_core.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -743,9 +761,6 @@
     <ClInclude Include="curl\lib\inet_ntop.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\inet_pton.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\llist.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -764,9 +779,6 @@
     <ClInclude Include="curl\lib\netrc.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\nonblock.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\parsedate.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -860,9 +872,6 @@
     <ClInclude Include="curl\lib\tftp.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\timeval.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\transfer.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -875,9 +884,6 @@
     <ClInclude Include="curl\lib\urldata.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\warnless.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\vauth\digest.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -920,18 +926,12 @@
     <ClInclude Include="curl\lib\vtls\wolfssl.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\dynbuf.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\mqtt.h">
       <Filter>Header Files</Filter>
     </ClInclude>
     <ClInclude Include="curl\lib\setup-win32.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\version_win32.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\vquic\vquic.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -962,9 +962,6 @@
     <ClInclude Include="curl\lib\headers.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\timediff.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\easy_lock.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -1037,9 +1034,6 @@
     <ClInclude Include="curl\lib\httpsrr.h">
       <Filter>Header Files</Filter>
     </ClInclude>
-    <ClInclude Include="curl\lib\strparse.h">
-      <Filter>Header Files</Filter>
-    </ClInclude>
     <ClInclude Include="curl\lib\vtls\cipher_suite.h">
       <Filter>Header Files</Filter>
     </ClInclude>
@@ -1055,6 +1049,69 @@
     <ClInclude Include="curl\lib\vtls\vtls_spack.h">
       <Filter>Header Files</Filter>
     </ClInclude>
+    <ClInclude Include="curl\lib\cshutdn.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\cw-pause.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\macos.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\multi_ev.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\fake_addrinfo.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\uint-bset.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\uint-hash.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\uint-spbset.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\uint-table.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\base64.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\curlx.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\dynbuf.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\inet_pton.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\multibyte.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\nonblock.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\strparse.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\timediff.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\timeval.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\version_win32.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\warnless.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="curl\lib\curlx\winapi.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
   </ItemGroup>
   <ItemGroup>
     <ResourceCompile Include="curl\lib\libcurl.rc">

3rdparty/discord-rpc/discord-rpc

@@ -1 +1 @@
-Subproject commit 171b2142ac8acdf016c231e36dc7a8d48daff19c
+Subproject commit 3dc2c326cb4dc5815c6069970c13154898f58d48

3rdparty/glslang/glslang

@@ -1 +1 @@
-Subproject commit 36d08c0d940cf307a23928299ef52c7970d8cee6
+Subproject commit fc9889c889561c5882e83819dcaffef5ed45529b

3rdparty/glslang/glslang.vcxproj

@@ -39,17 +39,15 @@
   <PropertyGroup Label="UserMacros">
     <CmakeGenerator>"Visual Studio $(VisualStudioVersion.Substring(0,2))"</CmakeGenerator>
     <CmakeReleaseCLI>call vsdevcmd.bat -arch=amd64
-      cmake -G $(CmakeGenerator) -A x64 -DCMAKE_BUILD_TYPE="Release" -DLLVM_USE_CRT_DEBUG=MDd -DLLVM_USE_CRT_RELEASE=MT -DENABLE_OPT=OFF -S glslang -B "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)"
+      cmake -G $(CmakeGenerator) -A x64 -DCMAKE_BUILD_TYPE="Release" -DCMAKE_MSVC_RUNTIME_LIBRARY=MultiThreaded -DGLSLANG_TESTS=OFF -DENABLE_GLSLANG_BINARIES=OFF -DBUILD_EXTERNAL=OFF -DENABLE_SPVREMAPPER=OFF -DENABLE_HLSL=OFF -DENABLE_OPT=OFF -S glslang -B "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)"
     </CmakeReleaseCLI>
     <CmakeDebugCLI>call vsdevcmd.bat -arch=amd64
-      cmake -G $(CmakeGenerator) -A x64 -DCMAKE_BUILD_TYPE="Debug" -DLLVM_USE_CRT_DEBUG=MDd -DLLVM_USE_CRT_RELEASE=MT -DENABLE_OPT=OFF -S glslang -B "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)"
+      cmake -G $(CmakeGenerator) -A x64 -DCMAKE_BUILD_TYPE="Debug" -DCMAKE_MSVC_RUNTIME_LIBRARY=MultiThreadedDebug -DGLSLANG_TESTS=OFF -DENABLE_GLSLANG_BINARIES=OFF -DBUILD_EXTERNAL=OFF -DENABLE_SPVREMAPPER=OFF -DENABLE_HLSL=OFF -DENABLE_OPT=OFF -S glslang -B "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)"
     </CmakeDebugCLI>
     <CmakeCopyCLI>
       echo Copying..
       mkdir "$(SolutionDir)build\lib\$(Configuration)-$(Platform)\$(ProjectName)"
-      copy "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)\hlsl\$(CONFIGURATION)\*.lib" "$(SolutionDir)build\lib\$(Configuration)-$(Platform)\$(ProjectName)"
       copy "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)\SPIRV\$(CONFIGURATION)\*.lib" "$(SolutionDir)build\lib\$(Configuration)-$(Platform)\$(ProjectName)"
-      copy "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)\OGLCompilersDLL\$(CONFIGURATION)\*.lib" "$(SolutionDir)build\lib\$(Configuration)-$(Platform)\$(ProjectName)"
       copy "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)\glslang\OSDependent\Windows\$(CONFIGURATION)\*.lib" "$(SolutionDir)build\lib\$(Configuration)-$(Platform)\$(ProjectName)"
       copy "$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)\glslang\$(CONFIGURATION)\*.lib" "$(SolutionDir)build\lib\$(Configuration)-$(Platform)\$(ProjectName)"
     </CmakeCopyCLI>

3rdparty/hidapi/hidapi

@@ -1 +1 @@
-Subproject commit 6bfdcf7368169efe1b745cd4468d45cda05ef8de
+Subproject commit f42423643ec9011c98cccc0bb790722bbbd3f30b

3rdparty/libpng/libpng

@@ -1 +1 @@
-Subproject commit 872555f4ba910252783af1507f9e7fe1653be252
+Subproject commit ea127968204cc5d10f3fc9250c306b9e8cbd9b80

3rdparty/libsdl-org/CMakeLists.txt

@@ -1,11 +1,4 @@
-option(SDL2_DISABLE_SDL2MAIN "" ON)
-option(SDL2_DISABLE_INSTALL "" ON)
-option(SDL2_DISABLE_UNINSTALL "" ON)
-option(SDL_SHARED OFF)
-set(SDL_SHARED_ENABLED_BY_DEFAULT OFF)
-option(SDL_STATIC ON)
-set(SDL_STATIC_ENABLED_BY_DEFAULT ON)
-option(SDL_TEST OFF)
-set(SDL_TEST_ENABLED_BY_DEFAULT OFF)
-set(OPT_DEF_LIBC ON)
+option(SDL_SHARED "Build a shared version of the library" OFF)
+option(SDL_STATIC "Build a static version of the library" ON)
+option(SDL_TEST_LIBRARY "Build the SDL3_test library" OFF)
 add_subdirectory(SDL EXCLUDE_FROM_ALL)

3rdparty/libsdl-org/SDL

@@ -1 +1 @@
-Subproject commit f6864924f76e1a0b4abaefc76ae2ed22b1a8916e
+Subproject commit 8d604353a53853fa56d1bdce0363535605ca868f

3rdparty/libsdl-org/SDL.vcxproj

@@ -532,8 +532,6 @@
       <AdditionalIncludeDirectories>SDL\include;SDL\include\build_config;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
       <DebugInformationFormat Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">ProgramDatabase</DebugInformationFormat>
       <Optimization Condition="'$(Configuration)|$(Platform)'=='Release|x64'">MaxSpeed</Optimization>
-      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">SDL_HIDAPI_DISABLED;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|x64'">SDL_HIDAPI_DISABLED;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ClCompile>
   </ItemDefinitionGroup>
   <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />

3rdparty/libusb/CMakeLists.txt

@@ -1,5 +1,3 @@
-cmake_minimum_required(VERSION 3.0)
-
 project(libusb)
 
 list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake_modules")

3rdparty/llvm/CMakeLists.txt

@@ -66,12 +66,10 @@ if(WITH_LLVM)
 		find_package(LLVM CONFIG)
 
 		if (NOT LLVM_FOUND)
-			message(FATAL_ERROR "Can't find LLVM libraries from the CMAKE_PREFIX_PATH path or LLVM_DIR. \
-													 Enable BUILD_LLVM option to build LLVM from included as a git submodule.")
+			message(FATAL_ERROR "Can't find LLVM libraries from the CMAKE_PREFIX_PATH path or LLVM_DIR. Enable BUILD_LLVM option to build LLVM from included as a git submodule.")
 		endif()
 		if (LLVM_VERSION VERSION_LESS 18)
-			message(FATAL_ERROR "Found LLVM version ${LLVM_VERSION}. Required version 18 or above. \
-													 Enable BUILD_LLVM option to build LLVM from included as a git submodule.")
+			message(FATAL_ERROR "Found LLVM version ${LLVM_VERSION}. Required version 18 or above. Enable BUILD_LLVM option to build LLVM from included as a git submodule.")
 		endif()
 	endif()
 

3rdparty/miniupnp/miniupnp

@@ -1 +1 @@
-Subproject commit 7f189988a0decca0ab7da89000051ab91751f70d
+Subproject commit d66872e34d9ff83a07f8b71371b13419b2089953

3rdparty/opencv/opencv

@@ -1 +1 @@
-Subproject commit f76628fb5b25746fcb75a7ce85be0d8c6439fc57
+Subproject commit 50fb5e701d8b0d3fe8262ed84668a94cc8cbf0b1

3rdparty/qt6.cmake

@@ -32,8 +32,7 @@ Find the correct ppa at https://launchpad.net/~beineri and follow the instructio
 else()
 	message("CMake was unable to find Qt6!")
 	if(WIN32)
-		message(FATAL_ERROR "Make sure the QTDIR env variable has been set properly. (for example C:\\Qt\\${QT_MIN_VER}\\msvc2019_64\\)
-You can also try setting the Qt6_DIR preprocessor definiton.")
+		message(FATAL_ERROR "Make sure the Qt6_ROOT environment variable has been set properly. (for example C:\\Qt\\${QT_MIN_VER}\\msvc2022_64\\)")
 	elseif(CMAKE_SYSTEM_NAME STREQUAL "Linux")
 		message(FATAL_ERROR "Make sure to install your distro's qt6 package!")
 	else()

3rdparty/version_check.sh

@@ -0,0 +1,135 @@
+#!/bin/bash -ex
+
+verbose=0
+git_verbose=0
+max_jobs=16
+
+lockfile="$(pwd)/version_check.lock"
+resultfile="$(pwd)/version_check_results.txt"
+
+if [ "$1" = "-v" ]; then
+    verbose=1
+elif [ "$1" = "-vv" ]; then
+    verbose=1
+    git_verbose=1
+fi
+
+# Limit concurrent jobs
+job_control()
+{
+    while [ "$(jobs | wc -l)" -ge "$max_jobs" ]; do
+        sleep 0.1
+    done
+}
+
+git_call()
+{
+    if [ "$git_verbose" -eq 1 ]; then
+        eval "git $@"
+    elif [[ "$1" == "fetch" ]]; then
+        eval "git $@ >/dev/null 2>&1"
+    else
+        eval "git $@ 2>/dev/null"
+    fi
+}
+
+check_tags()
+{
+    local path=$(echo "$1" | sed 's:/*$::')
+
+    echo "Checking $path"
+
+    # git_call fetch --prune --all
+
+    # Get the latest tag (by commit date, not tag name)
+    local tag_list=$(git_call rev-list --tags --max-count=1)
+    local latest_tag=$(git_call describe --tags "$tag_list")
+
+    if [ -n "$latest_tag" ]; then
+
+        # Get the current tag
+        local current_tag=$(git_call describe --tags --abbrev=0)
+
+        if [ -n "$current_tag" ]; then
+
+            if [ "$verbose" -eq 1 ]; then
+                echo "$path -> latest: $latest_tag, current: $current_tag"
+            fi
+
+            local ts1=$(git_call log -1 --format=%ct $latest_tag)
+            local ts2=$(git_call log -1 --format=%ct $current_tag)
+
+            if (( ts1 > ts2 )); then
+                if [ "$verbose" -eq 1 ]; then
+                    echo -e "\t $path: latest is newer"
+                elif [ "$verbose" -eq 0 ]; then
+                    echo "$path -> latest: $latest_tag, current: $current_tag"
+                fi
+
+                # Critical section guarded by flock
+                (
+                    flock 200
+                    echo "$path -> latest: $latest_tag, current: $current_tag" >> "$resultfile"
+                ) 200>"$lockfile"
+            fi
+
+        elif [ "$verbose" -eq 1 ]; then
+            echo "$path -> latest: $latest_tag"
+        fi
+    elif [ "$verbose" -eq 1 ]; then
+
+        if [ -n "$current_tag" ]; then
+            echo "$path -> current: $current_tag"
+        else
+            echo "$path -> no tags found"
+        fi
+    fi
+}
+
+# Fetch and check repositories multi threaded
+for submoduledir in */ ;
+do
+    cd "$submoduledir" || continue
+
+    if [ -e ".git" ]; then
+        job_control
+        check_tags "$submoduledir" &
+    else
+        for sub in */ ;
+        do
+            if [ -e "$sub/.git" ]; then
+                cd "$sub" || continue
+                job_control
+                check_tags "$submoduledir$sub" &
+                cd .. || exit
+            fi
+        done
+    fi
+
+    cd .. || exit
+done
+
+# Wait for all background jobs to finish
+wait
+
+# Print results
+echo -e "\n\nResult:\n"
+
+# Find the max length of the paths (before '->')
+max_len=0
+while IFS='->' read -r left _; do
+    len=$(echo -n "$left" | wc -c)
+    if (( len > max_len )); then
+        max_len=$len
+    fi
+done < "$resultfile"
+
+# Print with padding so '->' lines up
+while IFS='->' read -r left right; do
+    right=$(echo "$right" | sed 's/^[[:space:]]*>*[[:space:]]*//')
+    printf "%-${max_len}s -> %s\n" "$left" "$right"
+done < "$resultfile"
+
+# Remove tmp files
+rm -f "$resultfile"
+rm -f "$lockfile"

3rdparty/wolfssl/wolfssl

@@ -1 +1 @@
-Subproject commit 239b85c80438bf60d9a5b9e0ebe9ff097a760d0d
+Subproject commit b077c81eb635392e694ccedbab8b644297ec0285

BUILDING.md

@@ -19,26 +19,26 @@ The following tools are required to build RPCS3 on Windows 10 or later:
     with standalone **CMake** tool.
 
 - [Python 3.6+](https://www.python.org/downloads/) (add to PATH)
-- [Qt 6.8.3](https://www.qt.io/download-qt-installer) In case you can't download from the official installer, you can use [Another Qt installer](https://github.com/miurahr/aqtinstall) (In that case you will need to manually add the "qtmultimedia" module when installing Qt)
+- [Qt 6.9.1](https://www.qt.io/download-qt-installer) In case you can't download from the official installer, you can use [Another Qt installer](https://github.com/miurahr/aqtinstall) (In that case you will need to manually add the "qtmultimedia" module when installing Qt)
 - [Vulkan SDK 1.3.268.0](https://vulkan.lunarg.com/sdk/home) (see "Install the SDK" [here](https://vulkan.lunarg.com/doc/sdk/latest/windows/getting_started.html)) for now future SDKs don't work. You need precisely 1.3.268.0.
 
 The `sln` solution available only on **Visual Studio** is the preferred building solution. It easily allows to build the **RPCS3** application in `Release` and `Debug` mode.
 
 In order to build **RPCS3** with the `sln` solution (with **Visual Studio**), **Qt** libs need to be detected. To detect the libs:
-- add and set the `QTDIR` environment variable, e.g. `<QtInstallFolder>\6.8.3\msvc2022_64\`
+- add and set the `QTDIR` environment variable, e.g. `<QtInstallFolder>\6.9.1\msvc2022_64\`
 - or use the [Visual Studio Qt Plugin](https://marketplace.visualstudio.com/items?itemName=TheQtCompany.QtVisualStudioTools2022)
 
   **NOTE:** If you have issues with the **Visual Studio Qt Plugin**, you may want to uninstall it and install the [Legacy Qt Plugin](https://marketplace.visualstudio.com/items?itemName=TheQtCompany.LEGACYQtVisualStudioTools2022) instead.
 
 In order to build **RPCS3** with the `CMake` solution (with both **Visual Studio** and standalone **CMake** tool):
-- add and set the `Qt6_ROOT` environment variable to the **Qt** libs path, e.g. `<QtInstallFolder>\6.8.3\msvc2022_64\`
+- add and set the `Qt6_ROOT` environment variable to the **Qt** libs path, e.g. `<QtInstallFolder>\6.9.1\msvc2022_64\`
 
 ### Linux
 
 These are the essentials tools to build RPCS3 on Linux. Some of them can be installed through your favorite package manager:
 - Clang 17+ or GCC 13+
 - [CMake 3.28.0+](https://www.cmake.org/download/)
-- [Qt 6.8.3](https://www.qt.io/download-qt-installer)
+- [Qt 6.9.1](https://www.qt.io/download-qt-installer)
 - [Vulkan SDK 1.3.268.0](https://vulkan.lunarg.com/sdk/home) (See "Install the SDK" [here](https://vulkan.lunarg.com/doc/sdk/latest/linux/getting_started.html)) for now future SDKs don't work. You need precisely 1.3.268.0.
 - [SDL3](https://github.com/libsdl-org/SDL/releases) (for the FAudio backend)
 
@@ -121,7 +121,7 @@ Start **Visual Studio**, click on `Open a project or solution` and select the `r
 ##### Configuring the Qt Plugin (if used)
 
 1) go to `Extensions->Qt VS Tools->Qt Versions`
-2) add the path to your Qt installation with compiler e.g. `<QtInstallFolder>\6.8.3\msvc2022_64`, version will fill in automatically
+2) add the path to your Qt installation with compiler e.g. `<QtInstallFolder>\6.9.1\msvc2022_64`, version will fill in automatically
 3) go to `Extensions->Qt VS Tools->Options->Legacy Project Format`. (Only available in the **Legacy Qt Plugin**)
 4) set `Build: Run pre-build setup` to `true`. (Only available in the **Legacy Qt Plugin**)
 
@@ -129,19 +129,17 @@ Start **Visual Studio**, click on `Open a project or solution` and select the `r
 
 **NOTE:** The recommended build configuration is `Release`. (On older revisions: `Release - LLVM`)
 
-To speed up the compilation time, you may want to download and extract to `<rpcs3_root>\build\lib_ext\<$(Configuration)>-x64` (e.g. `c:\rpcs3\build\lib_ext\Release-x64`; the path needs to be created) some of the following precompiled libs:
+To speed up the compilation time, you may want to download and extract to `<rpcs3_root>\build\lib_ext\<$(Configuration)>-x64` (e.g. `c:\rpcs3\build\lib_ext\Release-x64`; the path needs to be created) the following precompiled lib:
 - [LLVM libs](https://github.com/RPCS3/llvm-mirror/releases/download/custom-build-win-19.1.7/llvmlibs_mt.7z)
-- [additional libs](https://github.com/RPCS3/glslang/releases/latest/download/glslanglibs_mt.7z)
 
 **NOTES:**
 - `<$(Configuration)>` can assume values `Release` or `Debug`.
-- Unoptimised/debug libs are currently not available precompiled for both **LLVM** and **glslang**. Trying to use them when building the **RPCS3** application in `Debug` mode will provide a `cannot open file` error.
+- Unoptimised/debug libs are currently not available precompiled for **LLVM**. Trying to use it when building the **RPCS3** application in `Debug` mode will provide a `cannot open file` error.
 
 If you're not using the precompiled libs, those dependency libs need to be compiled first. From the `Solution Explorer` panel:
 1) expand `__BUILD_BEFORE`
 2) from the `Solution Configurations` drop-down menu, select `Release` (select `Debug` if you want to build in `Debug` mode)
-3) one after another, right-click on the following projects and then click on `Build` to build the selected lib:
-   - `glslang`
+3) right-click one of the following projects and then click on `Build` to build the selected lib:
    - `llvm_build`
    - or `llvm_build_clang_cl` (if you have also the **clang** compiler installed on VS)
 

CMakeLists.txt

@@ -1,8 +1,16 @@
-cmake_minimum_required(VERSION 3.16.9)
+cmake_minimum_required(VERSION 3.28)
+
+find_program(CCACHE_PATH ccache HINTS ENV PATH)
+if(CCACHE_PATH)
+  message(STATUS "Using ccache: ${CCACHE_PATH}")
+  set(CMAKE_C_COMPILER_LAUNCHER "${CCACHE_PATH}")
+  set(CMAKE_CXX_COMPILER_LAUNCHER "${CCACHE_PATH}")
+endif()
 
 project(rpcs3 LANGUAGES C CXX)
 
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
+set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 
 if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
     if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS 11)
@@ -21,17 +29,27 @@ option(STATIC_LINK_LLVM "Link against LLVM statically. This will get set to ON i
 option(USE_FAUDIO "FAudio audio backend" ON)
 option(USE_LIBEVDEV "libevdev-based joystick support" ON)
 option(USE_DISCORD_RPC "Discord rich presence integration" OFF)
-option(USE_SYSTEM_ZLIB "Prefer system ZLIB instead of the builtin one" ON)
 option(USE_VULKAN "Vulkan render backend" ON)
 option(USE_PRECOMPILED_HEADERS "Use precompiled headers" OFF)
 option(USE_SDL "Enables SDL input handler" OFF)
-option(USE_SYSTEM_SDL "Prefer system SDL instead of the builtin one" ON)
-option(USE_SYSTEM_FFMPEG "Prefer system ffmpeg instead of the prebuild one" OFF)
-option(USE_SYSTEM_OPENAL "Prefer system OpenAL instead of the prebuild one" ON)
+option(USE_SYSTEM_CUBEB "Prefer system cubeb instead of the builtin one" OFF)
 option(USE_SYSTEM_CURL "Prefer system Curl instead of the prebuild one" ON)
+option(USE_SYSTEM_FAUDIO "Prefer system FAudio instead of the builtin one" OFF)
+option(USE_SYSTEM_FFMPEG "Prefer system ffmpeg instead of the prebuild one" OFF)
+option(USE_SYSTEM_FLATBUFFERS "Prefer system flatbuffers instead of the builtin one" OFF)
+option(USE_SYSTEM_LIBPNG "Prefer system libpng instead of the builtin one" OFF)
+option(USE_SYSTEM_LIBUSB "Prefer system libusb instead of the builtin one" OFF)
+option(USE_SYSTEM_MVK "Prefer system MoltenVK instead of the builtin one" OFF)
+option(USE_SYSTEM_OPENAL "Prefer system OpenAL instead of the prebuild one" ON)
 option(USE_SYSTEM_OPENCV "Prefer system OpenCV instead of the builtin one" ON)
+option(USE_SYSTEM_PUGIXML "Prefer system pugixml instead of the builtin one" OFF)
+option(USE_SYSTEM_SDL "Prefer system SDL instead of the builtin one" ON)
+option(USE_SYSTEM_WOLFSSL "Prefer system MoltenVK instead of the builtin one" OFF)
+option(USE_SYSTEM_ZLIB "Prefer system ZLIB instead of the builtin one" ON)
 option(HAS_MEMORY_BREAKPOINTS "Add support for memory breakpoints to the interpreter" OFF)
 option(USE_LTO "Use LTO for building" ON)
+option(BUILD_RPCS3_TESTS "Build RPCS3 unit tests." OFF)
+option(RUN_RPCS3_TESTS "Run RPCS3 unit tests. Requires BUILD_RPCS3_TESTS" OFF)
 
 set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/buildfiles/cmake")
 
@@ -105,11 +123,6 @@ if(NOT CMAKE_SIZEOF_VOID_P EQUAL 8)
     message( FATAL_ERROR "RPCS3 can only be compiled on 64-bit platforms." )
 endif()
 
-find_program(CCACHE_FOUND ccache)
-if(CCACHE_FOUND)
-    set(CMAKE_CXX_COMPILER_LAUNCHER ccache)
-endif()
-
 if(APPLE AND CMAKE_OSX_ARCHITECTURES STREQUAL "arm64")
     include_directories(/opt/homebrew/include)
     link_directories(/opt/homebrew/lib)
@@ -144,6 +157,9 @@ set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE "${PROJECT_BINARY_DIR}/bin")
 set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG "${PROJECT_BINARY_DIR}/bin")
 set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELWITHDEBINFO "${PROJECT_BINARY_DIR}/bin")
 
+if(BUILD_RPCS3_TESTS)
+    enable_testing()
+endif()
 add_subdirectory(rpcs3)
 
 set_directory_properties(PROPERTIES VS_STARTUP_PROJECT rpcs3)

README.md

@@ -1,10 +1,8 @@
 RPCS3
 =====
 
-[![Azure Build Status](https://dev.azure.com/nekotekina/nekotekina/_apis/build/status/RPCS3.rpcs3?branchName=master)](https://dev.azure.com/nekotekina/nekotekina/_build?definitionId=8&_a=summary&repositoryFilter=4)
-[![Cirrus CI - Base Branch Build Status](https://img.shields.io/cirrus/github/RPCS3/rpcs3/master?label=Cirrus%20CI&logo=cirrus-ci)](https://cirrus-ci.com/github/RPCS3/rpcs3)
 [![GitHub Actions](https://img.shields.io/github/actions/workflow/status/RPCS3/rpcs3/rpcs3.yml?branch=master&logo=github&label=Actions)](https://github.com/RPCS3/rpcs3/actions/workflows/rpcs3.yml)
-[![RPCS3 Discord Server](https://img.shields.io/discord/272035812277878785?color=5865F2&label=RPCS3%20Discord&logo=discord&logoColor=white)](https://discord.me/rpcs3)
+[![RPCS3 Discord Server](https://img.shields.io/discord/272035812277878785?color=5865F2&label=RPCS3%20Discord&logo=discord&logoColor=white)](https://discord.gg/rpcs3)
 
 The world's first free and open-source PlayStation 3 emulator/debugger, written in C++ for Windows, Linux, macOS and FreeBSD.
 
@@ -22,7 +20,6 @@ If you want to contribute as a developer, please take a look at the following pa
 
 * [Coding Style](https://github.com/RPCS3/rpcs3/wiki/Coding-Style)
 * [Developer Information](https://github.com/RPCS3/rpcs3/wiki/Developer-Information)
-* [Roadmap](https://rpcs3.net/roadmap)
 
 You should also contact any of the developers in the forums or in the Discord server to learn more about the current state of the emulator.
 
@@ -34,7 +31,7 @@ See [BUILDING.md](BUILDING.md) for more information about how to setup an enviro
 
 Check our friendly [quickstart](https://rpcs3.net/quickstart) guide to make sure your computer meets the minimum system requirements to run RPCS3.
 
-Don't forget to have your graphics driver up to date and to install the [Visual C++ Redistributable Packages for Visual Studio 2019](https://aka.ms/vs/16/release/VC_redist.x64.exe) if you are a Windows user.
+Don't forget to have your graphics driver up to date and to install the [Visual C++ Redistributable Packages for Visual Studio 2022](https://aka.ms/vs/17/release/VC_redist.x64.exe) if you are a Windows user.
 
 ## License
 

Utilities/File.cpp

@@ -1707,7 +1707,7 @@ fs::file fs::file::from_native_handle(native_handle handle)
 	fs::file result;
 
 #ifdef _WIN32
-	result.m_file = std::make_unique<windows_file>((const HANDLE)handle);
+	result.m_file = std::make_unique<windows_file>(static_cast<HANDLE>(handle));
 #else
 	result.m_file = std::make_unique<unix_file>(handle);
 #endif

Utilities/JITASM.cpp

@@ -344,15 +344,7 @@ jit_runtime_base& asmjit::get_global_runtime()
 	{
 		custom_runtime() noexcept
 		{
-			// Search starting in first 2 GiB of memory
-			for (u64 addr = size;; addr += size)
-			{
-				if (auto ptr = utils::memory_reserve(size, reinterpret_cast<void*>(addr)))
-				{
-					m_pos.raw() = static_cast<uchar*>(ptr);
-					break;
-				}
-			}
+			ensure(m_pos.raw() = static_cast<uchar*>(utils::memory_reserve(size)));
 
 			// Initialize "end" pointer
 			m_max = m_pos + size;

Utilities/StrFmt.cpp

@@ -748,6 +748,12 @@ void fmt::raw_append(std::string& out, const char* fmt, const fmt_type_info* sup
 
 std::string fmt::replace_all(std::string_view src, std::string_view from, std::string_view to, usz count)
 {
+	if (src.empty())
+		return {};
+
+	if (from.empty() || count == 0)
+		return std::string(src);
+
 	std::string target;
 	target.reserve(src.size() + to.size());
 
@@ -824,7 +830,12 @@ std::string fmt::trim(const std::string& source, std::string_view values)
 	if (begin == source.npos)
 		return {};
 
-	return source.substr(begin, source.find_last_not_of(values) + 1);
+	const usz end = source.find_last_not_of(values);
+
+	if (end == source.npos)
+		return source.substr(begin);
+
+	return source.substr(begin, end + 1 - begin);
 }
 
 std::string fmt::trim_front(const std::string& source, std::string_view values)
@@ -864,45 +875,6 @@ std::string fmt::truncate(std::string_view src, usz length)
 	return std::string(src.begin(), src.begin() + std::min(src.size(), length));
 }
 
-bool fmt::match(const std::string& source, const std::string& mask)
-{
-	usz source_position = 0, mask_position = 0;
-
-	for (; source_position < source.size() && mask_position < mask.size(); ++mask_position, ++source_position)
-	{
-		switch (mask[mask_position])
-		{
-		case '?': break;
-
-		case '*':
-			for (usz test_source_position = source_position; test_source_position < source.size(); ++test_source_position)
-			{
-				if (match(source.substr(test_source_position), mask.substr(mask_position + 1)))
-				{
-					return true;
-				}
-			}
-			return false;
-
-		default:
-			if (source[source_position] != mask[mask_position])
-			{
-				return false;
-			}
-
-			break;
-		}
-	}
-
-	if (source_position != source.size())
-		return false;
-
-	if (mask_position != mask.size())
-		return false;
-
-	return true;
-}
-
 std::string get_file_extension(const std::string& file_path)
 {
 	if (usz dotpos = file_path.find_last_of('.'); dotpos != std::string::npos && dotpos + 1 < file_path.size())

Utilities/StrUtil.h

@@ -39,11 +39,15 @@ std::string get_file_extension(const std::string& file_path);
 
 namespace fmt
 {
-	std::string replace_all(std::string_view src, std::string_view from, std::string_view to, usz count = -1);
+	// Replaces all occurrences of 'from' with 'to' until 'count' substrings were replaced.
+	std::string replace_all(std::string_view src, std::string_view from, std::string_view to, usz count = umax);
 
 	template <usz list_size>
 	std::string replace_all(std::string src, const std::pair<std::string_view, std::string> (&list)[list_size])
 	{
+		if constexpr (list_size == 0)
+			return src;
+
 		for (usz pos = 0; pos < src.length(); ++pos)
 		{
 			for (usz i = 0; i < list_size; ++i)
@@ -71,6 +75,9 @@ namespace fmt
 	template <usz list_size>
 	std::string replace_all(std::string src, const std::pair<std::string_view, std::function<std::string()>> (&list)[list_size])
 	{
+		if constexpr (list_size == 0)
+			return src;
+
 		for (usz pos = 0; pos < src.length(); ++pos)
 		{
 			for (usz i = 0; i < list_size; ++i)
@@ -99,6 +106,9 @@ namespace fmt
 	static inline
 	std::string replace_all(std::string src, const std::vector<std::pair<std::string, std::string>>& list)
 	{
+		if (list.empty())
+			return src;
+
 		for (usz pos = 0; pos < src.length(); ++pos)
 		{
 			for (usz i = 0; i < list.size(); ++i)
@@ -123,9 +133,16 @@ namespace fmt
 		return src;
 	}
 
+	// Splits the string into a vector of strings using the separators. The vector may contain empty strings unless is_skip_empty is true.
 	std::vector<std::string> split(std::string_view source, std::initializer_list<std::string_view> separators, bool is_skip_empty = true);
+
+	// Removes all preceding and trailing characters specified by 'values' from 'source'.
 	std::string trim(const std::string& source, std::string_view values = " \t");
+
+	// Removes all preceding characters specified by 'values' from 'source'.
 	std::string trim_front(const std::string& source, std::string_view values = " \t");
+
+	// Removes all trailing characters specified by 'values' from 'source'.
 	void trim_back(std::string& source, std::string_view values = " \t");
 
 	template <typename T>
@@ -175,13 +192,15 @@ namespace fmt
 		return result;
 	}
 
+	// Returns the string transformed to uppercase
 	std::string to_upper(std::string_view string);
+
+	// Returns the string transformed to lowercase
 	std::string to_lower(std::string_view string);
 
+	// Returns the string shortened to length
 	std::string truncate(std::string_view src, usz length);
 
-	bool match(const std::string& source, const std::string& mask);
-
 	struct buf_to_hexstring
 	{
 		buf_to_hexstring(const u8* buf, usz len, usz line_length = 16, bool with_prefix = false)

Utilities/Thread.cpp

@@ -2490,7 +2490,7 @@ void thread_ctrl::wait_for(u64 usec, [[maybe_unused]] bool alert /* true */)
 	if (alert)
 	{
 		list.set<0>(_this->m_sync, 0);
-		list.set<1>(utils::bless<atomic_t<u32>>(&_this->m_taskq)[1], 0);
+		list.template set<1>(_this->m_taskq);
 	}
 	else
 	{

Utilities/Thread.h

@@ -96,7 +96,7 @@ class thread_future
 	thread_future* prev{};
 
 protected:
-	atomic_t<void(*)(thread_base*, thread_future*)> exec{};
+	atomic_t<void(*)(const thread_base*, thread_future*)> exec{};
 
 	atomic_t<u32> done{0};
 
@@ -389,7 +389,7 @@ public:
 		: m_args(std::forward<Args>(args)...)
 		, m_func(std::forward<Ctx>(func))
 	{
-		thread_future::exec.raw() = +[](thread_base* tb, thread_future* tf)
+		thread_future::exec.raw() = +[](const thread_base* tb, thread_future* tf)
 		{
 			const auto _this = static_cast<future*>(tf);
 

Utilities/address_range.h

@@ -8,125 +8,134 @@
 
 namespace utils
 {
+	template <typename T>
 	class address_range_vector;
 
 	/**
 	 * Helpers
 	 */
-	static inline u32 page_start(u32 addr)
+	template <typename T>
+	T page_start(T addr)
 	{
-		return addr & ~(get_page_size() - 1);
+		return addr & ~static_cast<T>(get_page_size() - 1);
 	}
 
-	static inline u32 next_page(u32 addr)
+	template <typename T>
+	static inline T next_page(T addr)
 	{
-		return page_start(addr) + get_page_size();
+		return page_start(addr) + static_cast<T>(get_page_size());
 	}
 
-	static inline u32 page_end(u32 addr)
+	template <typename T>
+	static inline T page_end(T addr)
 	{
 		return next_page(addr) - 1;
 	}
 
-	static inline u32 is_page_aligned(u32 val)
+	template <typename T>
+	static inline T is_page_aligned(T val)
 	{
-		return (val & (get_page_size() - 1)) == 0;
+		return (val & static_cast<T>(get_page_size() - 1)) == 0;
 	}
 
 
 	/**
 	 * Address Range utility class
 	 */
+	template <typename T>
 	class address_range
 	{
 	public:
-		u32 start = umax; // First address in range
-		u32 end = 0; // Last address
+		T start = umax; // First address in range
+		T end = 0; // Last address
+
+		using signed_type_t = std::make_signed<T>::type;
 
 	private:
 		// Helper constexprs
-		static constexpr inline bool range_overlaps(u32 start1, u32 end1, u32 start2, u32 end2)
+		static constexpr inline bool range_overlaps(T start1, T end1, T start2, T end2)
 		{
 			return (start1 <= end2 && start2 <= end1);
 		}
 
-		static constexpr inline bool address_overlaps(u32 address, u32 start, u32 end)
+		static constexpr inline bool address_overlaps(T address, T start, T end)
 		{
 			return (start <= address && address <= end);
 		}
 
-		static constexpr inline bool range_inside_range(u32 start1, u32 end1, u32 start2, u32 end2)
+		static constexpr inline bool range_inside_range(T start1, T end1, T start2, T end2)
 		{
 			return (start1 >= start2 && end1 <= end2);
 		}
 
-		constexpr address_range(u32 _start, u32 _end) : start(_start), end(_end) {}
+		constexpr address_range(T _start, T _end) : start(_start), end(_end) {}
 
 	public:
 		// Constructors
 		constexpr address_range() = default;
 
-		static constexpr address_range start_length(u32 _start, u32 _length)
+		static constexpr address_range start_length(T _start, T _length)
 		{
 			if (!_length)
 			{
 				return {};
 			}
 
-			return {_start, _start + (_length - 1)};
+			const T _end = static_cast<T>(_start + _length - 1);
+			return {_start, _end};
 		}
 
-		static constexpr address_range start_end(u32 _start, u32 _end)
+		static constexpr address_range start_end(T _start, T _end)
 		{
 			return {_start, _end};
 		}
 
 		// Length
-		u32 length() const
+		T length() const
 		{
 			AUDIT(valid());
 			return end - start + 1;
 		}
 
-		void set_length(const u32 new_length)
+		void set_length(const T new_length)
 		{
 			end = start + new_length - 1;
 			ensure(valid());
 		}
 
-		u32 next_address() const
+		T next_address() const
 		{
 			return end + 1;
 		}
 
-		u32 prev_address() const
+		T prev_address() const
 		{
 			return start - 1;
 		}
 
 		// Overlapping checks
-		bool overlaps(const address_range &other) const
+		bool overlaps(const address_range<T>& other) const
 		{
 			AUDIT(valid() && other.valid());
 			return range_overlaps(start, end, other.start, other.end);
 		}
 
-		bool overlaps(const u32 addr) const
+		bool overlaps(const T addr) const
 		{
 			AUDIT(valid());
 			return address_overlaps(addr, start, end);
 		}
 
-		bool inside(const address_range &other) const
+		bool inside(const address_range<T>& other) const
 		{
 			AUDIT(valid() && other.valid());
 			return range_inside_range(start, end, other.start, other.end);
 		}
 
-		inline bool inside(const address_range_vector &vec) const;
-		inline bool overlaps(const address_range_vector &vec) const;
+		inline bool inside(const address_range_vector<T>& vec) const;
+		inline bool overlaps(const address_range_vector<T>& vec) const;
 
-		bool touches(const address_range &other) const
+		bool touches(const address_range<T>& other) const
 		{
 			AUDIT(valid() && other.valid());
 			// returns true if there is overlap, or if sections are side-by-side
@@ -134,7 +143,7 @@ namespace utils
 		}
 
 		// Utilities
-		s32 signed_distance(const address_range &other) const
+		signed_type_t signed_distance(const address_range<T>& other) const
 		{
 			if (touches(other))
 			{
@@ -144,15 +153,15 @@ namespace utils
 			// other after this
 			if (other.start > end)
 			{
-				return static_cast<s32>(other.start - end - 1);
+				return static_cast<signed_type_t>(other.start - end - 1);
 			}
 
 			// this after other
 			AUDIT(start > other.end);
-			return -static_cast<s32>(start - other.end - 1);
+			return -static_cast<signed_type_t>(start - other.end - 1);
 		}
 
-		u32 distance(const address_range &other) const
+		T distance(const address_range<T>& other) const
 		{
 			if (touches(other))
 			{
@@ -170,7 +179,7 @@ namespace utils
 			return (start - other.end - 1);
 		}
 
-		address_range get_min_max(const address_range &other) const
+		address_range<T> get_min_max(const address_range<T>& other) const
 		{
 			return {
 				std::min(valid() ? start : umax, other.valid() ? other.start : umax),
@@ -178,7 +187,7 @@ namespace utils
 			};
 		}
 
-		void set_min_max(const address_range &other)
+		void set_min_max(const address_range<T>& other)
 		{
 			*this = get_min_max(other);
 		}
@@ -188,7 +197,7 @@ namespace utils
 			return (valid() && is_page_aligned(start) && is_page_aligned(length()));
 		}
 
-		address_range to_page_range() const
+		address_range<T> to_page_range() const
 		{
 			AUDIT(valid());
 			return { page_start(start), page_end(end) };
@@ -202,7 +211,7 @@ namespace utils
 			AUDIT(is_page_range());
 		}
 
-		address_range get_intersect(const address_range &clamp) const
+		address_range<T> get_intersect(const address_range<T>& clamp) const
 		{
 			if (!valid() || !clamp.valid())
 			{
@@ -212,7 +221,7 @@ namespace utils
 			return { std::max(start, clamp.start), std::min(end, clamp.end) };
 		}
 
-		void intersect(const address_range &clamp)
+		void intersect(const address_range<T>& clamp)
 		{
 			if (!clamp.valid())
 			{
@@ -238,7 +247,7 @@ namespace utils
 		}
 
 		// Comparison Operators
-		bool operator ==(const address_range& other) const
+		bool operator ==(const address_range<T>& other) const
 		{
 			return (start == other.start && end == other.end);
 		}
@@ -252,21 +261,27 @@ namespace utils
 		}
 	};
 
-	static inline address_range page_for(u32 addr)
+	using address_range16 = address_range<u16>;
+	using address_range32 = address_range<u32>;
+	using address_range64 = address_range<u64>;
+
+	template <typename T>
+	static inline address_range<T> page_for(T addr)
 	{
-		return address_range::start_end(page_start(addr), page_end(addr));
+		return address_range<T>::start_end(page_start(addr), page_end(addr));
 	}
 
 
 	/**
 	 * Address Range Vector utility class
 	 *
-	 * Collection of address_range objects. Allows for merging and removing ranges from the set.
+	 * Collection of address_range<T> objects. Allows for merging and removing ranges from the set.
 	 */
+	template <typename T>
 	class address_range_vector
 	{
 	public:
-		using vector_type = std::vector<address_range>;
+		using vector_type = std::vector<address_range<T>>;
 		using iterator = vector_type::iterator;
 		using const_iterator = vector_type::const_iterator;
 		using size_type = vector_type::size_type;
@@ -280,8 +295,8 @@ namespace utils
 		inline void clear() { data.clear(); }
 		inline size_type size() const { return data.size(); }
 		inline bool empty() const { return data.empty(); }
-		inline address_range& operator[](size_type n) { return data[n]; }
-		inline const address_range& operator[](size_type n) const { return data[n]; }
+		inline address_range<T>& operator[](size_type n) { return data[n]; }
+		inline const address_range<T>& operator[](size_type n) const { return data[n]; }
 		inline iterator begin() { return data.begin(); }
 		inline const_iterator begin() const { return data.begin(); }
 		inline iterator end() { return data.end(); }
@@ -289,7 +304,7 @@ namespace utils
 
 		// Search for ranges that touch new_range. If found, merge instead of adding new_range.
 		// When adding a new range, re-use invalid ranges whenever possible
-		void merge(const address_range &new_range)
+		void merge(const address_range<T>& new_range)
 		{
 			// Note the case where we have
 			//   AAAA  BBBB
@@ -301,8 +316,8 @@ namespace utils
 				return;
 			}
 
-			address_range *found = nullptr;
-			address_range *invalid = nullptr;
+			address_range<T> *found = nullptr;
+			address_range<T> *invalid = nullptr;
 
 			for (auto &existing : data)
 			{
@@ -347,22 +362,22 @@ namespace utils
 			AUDIT(check_consistency());
 		}
 
-		void merge(const address_range_vector &other)
+		void merge(const address_range_vector<T>& other)
 		{
-			for (const address_range &new_range : other)
+			for (const address_range<T>& new_range : other)
 			{
 				merge(new_range);
 			}
 		}
 
 		// Exclude a given range from data
-		void exclude(const address_range &exclusion)
+		void exclude(const address_range<T>& exclusion)
 		{
 			// Note the case where we have
 			//    AAAAAAA
 			//      EEE
 			// where data={A} and exclusion=E.
-			// In this case, we need to reduce A to the head (before E starts), and then create a new address_range B for the tail (after E ends), i.e.
+			// In this case, we need to reduce A to the head (before E starts), and then create a new address_range<T> B for the tail (after E ends), i.e.
 			//    AA   BB
 			//      EEE
 
@@ -371,13 +386,13 @@ namespace utils
 				return;
 			}
 
-			address_range *invalid = nullptr; // try to re-use an invalid range instead of calling push_back
+			address_range<T> *invalid = nullptr; // try to re-use an invalid range instead of calling push_back
 
 			// We use index access because we might have to push_back within the loop, which could invalidate the iterators
 			size_type _size = data.size();
 			for (size_type n = 0; n < _size; ++n)
 			{
-				address_range &existing = data[n];
+				address_range<T>& existing = data[n];
 
 				if (!existing.valid())
 				{
@@ -430,7 +445,7 @@ namespace utils
 					else
 					{
 						// IMPORTANT: adding to data invalidates "existing". This must be done last!
-						data.push_back(address_range::start_end(exclusion.next_address(), tail_end));
+						data.push_back(address_range<T>::start_end(exclusion.next_address(), tail_end));
 					}
 				}
 			}
@@ -438,9 +453,9 @@ namespace utils
 			AUDIT(!overlaps(exclusion));
 		}
 
-		void exclude(const address_range_vector &other)
+		void exclude(const address_range_vector<T>& other)
 		{
-			for (const address_range &exclusion : other)
+			for (const address_range<T>& exclusion : other)
 			{
 				exclude(exclusion);
 			}
@@ -478,25 +493,25 @@ namespace utils
 		}
 
 		// Test for overlap with a given range
-		bool overlaps(const address_range &range) const
+		bool overlaps(const address_range<T>& range) const
 		{
-			return std::any_of(data.cbegin(), data.cend(), [&range](const address_range& cur)
+			return std::any_of(data.cbegin(), data.cend(), [&range](const address_range<T>& cur)
 			{
 				return cur.valid() && cur.overlaps(range);
 			});
 		}
 
-		// Test for overlap with a given address_range vector
-		bool overlaps(const address_range_vector &other) const
+		// Test for overlap with a given address_range<T> vector
+		bool overlaps(const address_range_vector<T>& other) const
 		{
-			for (const address_range &rng1 : data)
+			for (const address_range<T>& rng1 : data)
 			{
 				if (!rng1.valid())
 				{
 					continue;
 				}
 
-				for (const address_range &rng2 : other.data)
+				for (const address_range<T>& rng2 : other.data)
 				{
 					if (!rng2.valid())
 					{
@@ -513,36 +528,56 @@ namespace utils
 		}
 
 		// Test if a given range is fully contained inside this vector
-		bool contains(const address_range &range) const
+		bool contains(const address_range<T>& range) const
 		{
-			return std::any_of(this->begin(), this->end(), [&range](const address_range& cur)
+			return std::any_of(this->begin(), this->end(), [&range](const address_range<T>& cur)
 			{
 				return cur.valid() && cur.inside(range);
 			});
 		}
 
 		// Test if all ranges in this vector are full contained inside a specific range
-		bool inside(const address_range &range) const
+		bool inside(const address_range<T>& range) const
 		{
-			return std::all_of(this->begin(), this->end(), [&range](const address_range& cur)
+			return std::all_of(this->begin(), this->end(), [&range](const address_range<T>& cur)
 			{
 				return !cur.valid() || cur.inside(range);
 			});
 		}
+
+		// Count valid entries
+		usz valid_count() const
+		{
+			usz count = 0;
+			for (const auto& e : data)
+			{
+				if (e.valid())
+				{
+					count++;
+				}
+			}
+			return count;
+		}
 	};
 
 
 	// These declarations must be done after address_range_vector has been defined
-	bool address_range::inside(const address_range_vector &vec) const
+	template <typename T>
+	bool address_range<T>::inside(const address_range_vector<T>& vec) const
 	{
 		return vec.contains(*this);
 	}
 
-	bool address_range::overlaps(const address_range_vector &vec) const
+	template <typename T>
+	bool address_range<T>::overlaps(const address_range_vector<T>& vec) const
 	{
 		return vec.overlaps(*this);
 	}
 
+	using address_range_vector16 = address_range_vector<u16>;
+	using address_range_vector32 = address_range_vector<u32>;
+	using address_range_vector64 = address_range_vector<u64>;
+
 } // namespace utils
 
 
@@ -551,9 +586,9 @@ namespace std
 	static_assert(sizeof(usz) >= 2 * sizeof(u32), "usz must be at least twice the size of u32");
 
 	template <>
-	struct hash<utils::address_range>
+	struct hash<utils::address_range32>
 	{
-		usz operator()(const utils::address_range& k) const
+		usz operator()(const utils::address_range32& k) const
 		{
 			// we can guarantee a unique hash since our type is 64 bits and usz as well
 			return (usz{ k.start } << 32) | usz{ k.end };

Utilities/bin_patch.cpp

@@ -1732,7 +1732,7 @@ void patch_engine::save_config(const patch_map& patches_map)
 
 	fs::pending_file file(path);
 
-	if (!file.file || (file.file.write(out.c_str(), out.size()), !file.commit()))
+	if (!file.file || file.file.write(out.c_str(), out.size()) < out.size() || !file.commit())
 	{
 		patch_log.error("Failed to create patch config file %s (error=%s)", path, fs::g_tls_error);
 	}

Utilities/git-version-gen.cmd

@@ -94,8 +94,6 @@ if defined BUILD_SOURCEBRANCHNAME (
 
 	rem // This must be a CI build
 
-	echo SYSTEM_PULLREQUEST_SOURCEBRANCH: %SYSTEM_PULLREQUEST_SOURCEBRANCH%
-
 	if defined BUILD_REPOSITORY_NAME (
 		echo BUILD_REPOSITORY_NAME: %BUILD_REPOSITORY_NAME%
 	) else (
@@ -110,9 +108,7 @@ if defined BUILD_SOURCEBRANCHNAME (
 
 	rem // These environment variables are defined by CI
 	rem // BUILD_REPOSITORY_NAME will look like "RPCS3/rpcs3"
-	rem // SYSTEM_PULLREQUEST_SOURCEBRANCH will look like "master"
 	rem // BUILD_SOURCEBRANCHNAME will look like "master"
-	rem // See https://docs.microsoft.com/en-us/azure/devops/pipelines/build/variables
 	set GIT_FULL_BRANCH=%BUILD_REPOSITORY_NAME%/%BUILD_SOURCEBRANCHNAME%
 	echo GIT_FULL_BRANCH: !GIT_FULL_BRANCH!
 
@@ -129,12 +125,12 @@ if defined BUILD_SOURCEBRANCHNAME (
 		rem // This must be a pull request or a build from a fork.
 		echo Assuming pull request build
 
-		if "%SYSTEM_PULLREQUEST_SOURCEBRANCH%"=="master" (
+		if "%BUILD_SOURCEBRANCHNAME%"=="master" (
 			rem // If pull request comes from a master branch, GIT_BRANCH = username/branch in order to distinguish from upstream/master
 			for /f "tokens=1* delims=/" %%a in ("%BUILD_REPOSITORY_NAME%") do set user=%%a
-			set "GIT_BRANCH=!user!/%SYSTEM_PULLREQUEST_SOURCEBRANCH%"
+			set "GIT_BRANCH=!user!/%BUILD_SOURCEBRANCHNAME%"
 		) else (
-			set GIT_BRANCH=%SYSTEM_PULLREQUEST_SOURCEBRANCH%
+			set GIT_BRANCH=%BUILD_SOURCEBRANCHNAME%
 		)
 
 		rem // Make GIT_VERSION the last commit (shortened); Don't include commit count on non-release builds

Utilities/lockless.h

@@ -49,7 +49,7 @@ public:
 
 			if (!next)
 			{
-				// Do not allow access beyond many element more at a time 
+				// Do not allow access beyond many element more at a time
 				ensure(!installed && index - i < N * 2);
 
 				installed = true;
@@ -384,17 +384,25 @@ public:
 template <typename T>
 class lf_queue final
 {
-	atomic_t<u64> m_head{0};
-
-	lf_queue_item<T>* load(u64 value) const noexcept
+private:
+	struct fat_ptr
 	{
-		return reinterpret_cast<lf_queue_item<T>*>(value >> 16);
+		u64 ptr{};
+		u32 is_non_null{};
+		u32 reserved{};
+	};
+
+	atomic_t<fat_ptr> m_head{fat_ptr{}};
+
+	lf_queue_item<T>* load(fat_ptr value) const noexcept
+	{
+		return reinterpret_cast<lf_queue_item<T>*>(value.ptr);
 	}
 
 	// Extract all elements and reverse element order (FILO to FIFO)
 	lf_queue_item<T>* reverse() noexcept
 	{
-		if (auto* head = load(m_head) ? load(m_head.exchange(0)) : nullptr)
+		if (auto* head = load(m_head) ? load(m_head.exchange(fat_ptr{})) : nullptr)
 		{
 			if (auto* prev = head->m_link)
 			{
@@ -420,7 +428,7 @@ public:
 
 	lf_queue(lf_queue&& other) noexcept
 	{
-		m_head.release(other.m_head.exchange(0));
+		m_head.release(other.m_head.exchange(fat_ptr{}));
 	}
 
 	lf_queue& operator=(lf_queue&& other) noexcept
@@ -430,8 +438,7 @@ public:
 			return *this;
 		}
 
-		delete load(m_head);
-		m_head.release(other.m_head.exchange(0));
+		delete load(m_head.exchange(other.m_head.exchange(fat_ptr{})));
 		return *this;
 	}
 
@@ -442,12 +449,17 @@ public:
 
 	void wait(std::nullptr_t /*null*/ = nullptr) noexcept
 	{
-		if (m_head == 0)
+		if (!operator bool())
 		{
-			utils::bless<atomic_t<u32>>(&m_head)[1].wait(0);
+			get_wait_atomic().wait(0);
 		}
 	}
 
+	atomic_t<u32> &get_wait_atomic()
+	{
+		return *utils::bless<atomic_t<u32>>(&m_head.raw().is_non_null);
+	}
+
 	const volatile void* observe() const noexcept
 	{
 		return load(m_head);
@@ -455,7 +467,7 @@ public:
 
 	explicit operator bool() const noexcept
 	{
-		return m_head != 0;
+		return observe() != nullptr;
 	}
 
 	template <bool Notify = true, typename... Args>
@@ -464,25 +476,25 @@ public:
 		auto oldv = m_head.load();
 		auto item = new lf_queue_item<T>(load(oldv), std::forward<Args>(args)...);
 
-		while (!m_head.compare_exchange(oldv, reinterpret_cast<u64>(item) << 16))
+		while (!m_head.compare_exchange(oldv, fat_ptr{reinterpret_cast<u64>(item), item != nullptr, 0}))
 		{
 			item->m_link = load(oldv);
 		}
 
-		if (!oldv && Notify)
+		if (!oldv.ptr && Notify)
 		{
 			// Notify only if queue was empty
 			notify(true);
 		}
 
-		return !oldv;
+		return !oldv.ptr;
 	}
 
 	void notify(bool force = false)
 	{
 		if (force || operator bool())
 		{
-			utils::bless<atomic_t<u32>>(&m_head)[1].notify_one();
+			get_wait_atomic().notify_one();
 		}
 	}
 
@@ -498,7 +510,7 @@ public:
 	lf_queue_slice<T> pop_all_reversed()
 	{
 		lf_queue_slice<T> result;
-		result.m_head = load(m_head.exchange(0));
+		result.m_head = load(m_head.exchange(fat_ptr{}));
 		return result;
 	}
 

Utilities/transactional_storage.h

@@ -84,9 +84,8 @@ public:
 	transactional_storage& operator=(const transactional_storage&) = delete;
 
 	transactional_storage(transactional_storage&& other)
+		: pool(std::move(other.pool))
 	{
-		pool = std::move(other.pool);
-
 		std::unique_lock lock_other{other.current_mutex};
 		const std::shared_ptr<T> other_current = other.current;
 		other.current = nullptr;

azure-pipelines.yml

@@ -1,260 +0,0 @@
-trigger:
-  branches:
-    include:
-      - master
-  tags:
-    exclude:
-      - '*'
-pr:
-  branches:
-    include:
-      - master
-jobs:
-# - job: Linux_Build
-#   strategy:
-#     matrix:
-#       Clang:
-#         COMPILER: clang
-#       GCC:
-#         COMPILER: gcc
-#   variables:
-#     CCACHE_DIR: $(Pipeline.Workspace)/ccache
-#     CI_HAS_ARTIFACTS: true
-#     UPLOAD_COMMIT_HASH: d812f1254a1157c80fd402f94446310560f54e5f
-#     UPLOAD_REPO_FULL_NAME: "RPCS3/rpcs3-binaries-linux"
-#     DEPLOY_APPIMAGE: true
-#     APPDIR: "/rpcs3/build/appdir"
-#     ARTDIR: "/root/artifacts"
-#     RELEASE_MESSAGE: "/rpcs3/GitHubReleaseMessage.txt"
-
-#   pool:
-#     vmImage: 'ubuntu-latest'
-
-#   steps:
-#   - task: Cache@2
-#     inputs:
-#       key: ccache | $(Agent.OS) | $(COMPILER) | $(Build.SourceVersion)
-#       restoreKeys: |
-#        ccache | $(Agent.OS) | $(COMPILER)
-#       path: $(CCACHE_DIR)
-#     displayName: ccache
-
-#   - bash: |
-#       docker pull --quiet rpcs3/rpcs3-ci-jammy:1.3
-#       docker run                      \
-#         -v $(pwd):/rpcs3              \
-#         --env-file .ci/docker.env \
-#         -v $CCACHE_DIR:/root/.ccache  \
-#         -v $BUILD_ARTIFACTSTAGINGDIRECTORY:/root/artifacts \
-#         rpcs3/rpcs3-ci-jammy:1.3 \
-#         /rpcs3/.ci/build-linux.sh
-#     displayName: Docker setup and build
-
-#   - publish: $(Build.ArtifactStagingDirectory)
-#     condition: succeeded()
-#     artifact: RPCS3 for Linux ($(COMPILER))
-
-#   - bash: |
-#       COMM_TAG=$(awk '/version{.*}/ { printf("%d.%d.%d", $5, $6, $7) }' ./rpcs3/rpcs3_version.cpp)
-#       COMM_COUNT=$(git rev-list --count HEAD)
-#       COMM_HASH=$(git rev-parse --short=8 HEAD)
-
-#       export AVVER="${COMM_TAG}-${COMM_COUNT}"
-
-#       .ci/github-upload.sh
-#     condition: and(ne(variables['Build.Reason'], 'PullRequest'), eq(variables['Build.Repository.Name'], 'RPCS3/rpcs3'), eq(variables['Build.SourceBranch'], 'refs/heads/master'), eq(variables['COMPILER'], 'clang'))
-#     displayName: Push build to GitHub
-#     env:
-#       RPCS3_TOKEN: $(RPCS3-Token)
-
-# - job: Windows_Build
-#   variables:
-#     COMPILER: msvc
-#     QT_VER_MAIN: '6'
-#     QT_VER: '6.8.3'
-#     QT_VER_MSVC: 'msvc2022'
-#     QT_DATE: '202503201308'
-#     QTDIR: C:\Qt\$(QT_VER)\$(QT_VER_MSVC)_64
-#     LLVM_VER: '19.1.7'
-#     VULKAN_VER: '1.3.268.0'
-#     VULKAN_SDK_SHA: '8459ef49bd06b697115ddd3d97c9aec729e849cd775f5be70897718a9b3b9db5'
-#     VULKAN_SDK: C:\VulkanSDK\$(VULKAN_VER)
-#     CCACHE_SHA: '6252f081876a9a9f700fae13a5aec5d0d486b28261d7f1f72ac11c7ad9df4da9'
-#     CCACHE_BIN_DIR: 'C:\ccache_bin'
-#     CCACHE_DIR: 'C:\ccache'
-#     CCACHE_INODECACHE: 'true'
-#     CCACHE_SLOPPINESS: 'time_macros'
-#     DEPS_CACHE_DIR: ./dependency_cache
-#     UPLOAD_COMMIT_HASH: 7d09e3be30805911226241afbb14f8cdc2eb054e
-#     UPLOAD_REPO_FULL_NAME: "RPCS3/rpcs3-binaries-win"
-
-#   pool:
-#     vmImage: "windows-latest"
-
-#   steps:
-#     - bash: .ci/get_keys-windows.sh
-#       displayName: Get Cache Keys
-
-#     - task: Cache@2
-#       inputs:
-#         key: ccache | $(Agent.OS) | $(COMPILER) | "$(Build.SourceVersion)"
-#         path: $(CCACHE_DIR)
-#         restoreKeys: 
-#           ccache | $(Agent.OS) | $(COMPILER)
-#       displayName: Build Ccache
-
-#     - task: Cache@2
-#       inputs:
-#         key: $(Agent.OS) | $(COMPILER) | "$(QT_VER)" | $(VULKAN_SDK_SHA) | $(CCACHE_SHA) | llvm.lock | glslang.lock
-#         path: $(DEPS_CACHE_DIR)
-#       displayName: Dependencies Cache
-
-#     - bash: .ci/setup-windows.sh
-#       displayName: Download and unpack dependencies
-
-#     - bash: .ci/export-azure-vars.sh
-#       displayName: Export Variables
-
-#     - task: VSBuild@1
-#       inputs:
-#         solution: 'rpcs3.sln'
-#         maximumCpuCount: true
-#         platform: x64
-#         configuration: 'Release'
-#         msbuildArgs: /p:CLToolPath=$(CCACHE_BIN_DIR) /p:UseMultiToolTask=true /p:CustomAfterMicrosoftCommonTargets="$(Build.SourcesDirectory)\buildfiles\msvc\ci_only.targets"
-#       displayName: Compile RPCS3
-
-#     - bash: .ci/deploy-windows.sh
-#       displayName: Pack up build artifacts
-
-#     - publish: $(Build.ArtifactStagingDirectory)
-#       condition: succeeded()
-#       artifact: RPCS3 for Windows
-
-#     - bash: .ci/github-upload.sh
-#       condition: and(ne(variables['Build.Reason'], 'PullRequest'), eq(variables['Build.Repository.Name'], 'RPCS3/rpcs3'), eq(variables['Build.SourceBranch'], 'refs/heads/master'))
-#       displayName: Push build to GitHub
-#       env:
-#         RPCS3_TOKEN: $(RPCS3-Token)
-
-- job: Mac_Build_x86_64
-  timeoutInMinutes: 180
-  variables:
-    CCACHE_DIR: "/tmp/ccache_dir"
-    CCACHE_MAXSIZE: 300M
-    CI_HAS_ARTIFACTS: true
-    UPLOAD_COMMIT_HASH: 51ae32f468089a8169aaf1567de355ff4a3e0842
-    UPLOAD_REPO_FULL_NAME: "RPCS3/rpcs3-binaries-mac"
-    RELEASE_MESSAGE: "../GitHubReleaseMessage.txt"
-    ARTDIR: $(Build.ArtifactStagingDirectory)
-    QT_VER: '6.7.3'
-    QT_VER_MAIN: '6'
-    LLVM_COMPILER_VER: '19'
-
-  pool:
-    vmImage: "macOS-14"
-
-  steps:
-    - task: Cache@2
-      inputs:
-        key: ccache | "$(Agent.OS)" | "$(Agent.OSArchitecture)" | "$(Build.SourceVersion)"
-        path: $(CCACHE_DIR)
-        restoreKeys: |
-          ccache | "$(Agent.OS)" | "$(Agent.OSArchitecture)"
-      displayName: Ccache cache
-
-    - task: Cache@2
-      inputs:
-        key: qt | "$(Agent.OS)" | "$(Agent.OSArchitecture)" | "$(QT_VER)" 
-        path: /tmp/Qt
-        restoreKeys: |
-          qt | "$(Agent.OS)" | "$(Agent.OSArchitecture)" | "$(QT_VER)" 
-      displayName: Qt cache
-
-    # - task: Cache@2
-    #   inputs:
-    #     key: brew | "$(Agent.OS)"
-    #     path: /Users/runner/Library/Caches/Homebrew
-    #     restoreKeys: |
-    #       brew | "$(Agent.OS)"
-    #   displayName: Homebrew cache
-
-    - bash: |
-        chmod +x ".ci/build-mac.sh"
-        chmod +x ".ci/deploy-mac.sh"
-        chmod +x ".ci/optimize-mac.sh"
-        ".ci/build-mac.sh"
-      displayName: Build macOS (x86_64)
-
-    - publish: $(Build.ArtifactStagingDirectory)
-      condition: succeeded()
-      artifact: RPCS3 for Mac (Intel)
-
-    - bash: |
-        source './.ci/export-cirrus-vars.sh'
-        .ci/github-upload.sh
-      condition: and(ne(variables['Build.Reason'], 'PullRequest'), eq(variables['Build.Repository.Name'], 'RPCS3/rpcs3'), eq(variables['Build.SourceBranch'], 'refs/heads/master'))
-      displayName: Push build to GitHub
-      env:
-        RPCS3_TOKEN: $(RPCS3-Token)
-
-- job: Mac_Build_arm64
-  timeoutInMinutes: 180
-  variables:
-    CCACHE_DIR: "/tmp/ccache_dir"
-    CCACHE_MAXSIZE: 300M
-    CI_HAS_ARTIFACTS: true
-    UPLOAD_COMMIT_HASH: 8e21bdbc40711a3fccd18fbf17b742348b0f4281
-    UPLOAD_REPO_FULL_NAME: "RPCS3/rpcs3-binaries-mac-arm64"
-    RELEASE_MESSAGE: "../GitHubReleaseMessage.txt"
-    ARTDIR: $(Build.ArtifactStagingDirectory)
-    QT_VER: '6.7.3'
-    QT_VER_MAIN: '6'
-    LLVM_COMPILER_VER: '19'
-
-  pool:
-    vmImage: "macOS-14"
-
-  steps:
-    - task: Cache@2
-      inputs:
-        key: ccache | "$(Agent.OS)" | "$(Agent.OSArchitecture)" | "$(Build.SourceVersion)"
-        path: $(CCACHE_DIR)
-        restoreKeys: |
-          ccache | "$(Agent.OS)" | "$(Agent.OSArchitecture)"
-      displayName: Ccache cache
-
-    - task: Cache@2
-      inputs:
-        key: qt | "$(Agent.OS)" | "$(Agent.OSArchitecture)" | "$(QT_VER)"
-        path: /tmp/Qt
-        restoreKeys: |
-          qt | "$(Agent.OS)" | "$(Agent.OSArchitecture)" | "$(QT_VER)"
-      displayName: Qt cache
-
-    # - task: Cache@2
-    #   inputs:
-    #     key: brew | "$(Agent.OS)"
-    #     path: /Users/runner/Library/Caches/Homebrew
-    #     restoreKeys: |
-    #       brew | "$(Agent.OS)"
-    #   displayName: Homebrew cache
-
-    - bash: |
-        chmod +x ".ci/build-mac-arm64.sh"
-        chmod +x ".ci/deploy-mac-arm64.sh"
-        chmod +x ".ci/optimize-mac.sh"
-        ".ci/build-mac-arm64.sh"
-      displayName: Build macOS (arm64)
-
-    - publish: $(Build.ArtifactStagingDirectory)
-      condition: succeeded()
-      artifact: RPCS3 for Mac (Apple Silicon)
-
-    - bash: |
-        source './.ci/export-cirrus-vars.sh'
-        .ci/github-upload.sh
-      condition: and(ne(variables['Build.Reason'], 'PullRequest'), eq(variables['Build.Repository.Name'], 'RPCS3/rpcs3'), eq(variables['Build.SourceBranch'], 'refs/heads/master'))
-      displayName: Push build to GitHub
-      env:
-        RPCS3_TOKEN: $(RPCS3-Token)

bin/git/README.md

@@ -1 +0,0 @@
-Cached data from GitHub API.

buildfiles/cmake/ConfigureCompiler.cmake

@@ -5,13 +5,12 @@ if(MSVC)
 	add_compile_definitions(
 		_CRT_SECURE_NO_DEPRECATE=1 _CRT_NON_CONFORMING_SWPRINTFS=1 _SCL_SECURE_NO_WARNINGS=1
 		NOMINMAX _ENABLE_EXTENDED_ALIGNED_STORAGE=1 _HAS_EXCEPTIONS=0)
-	add_link_options(/DYNAMICBASE:NO /BASE:0x10000 /FIXED)
+	add_link_options(/DYNAMICBASE:YES)
 
 	#TODO: Some of these could be cleaned up
 	add_compile_options(/wd4805) # Comparing boolean and int
 	add_compile_options(/wd4804) # Using integer operators with booleans
 	add_compile_options(/wd4200) # Zero-sized array in struct/union
-	add_link_options(/ignore:4281) # Undesirable base address 0x10000
 
 	# MSVC 2017 uses iterator as base class internally, causing a lot of warning spam
 	add_compile_definitions(_SILENCE_CXX17_ITERATOR_BASE_CLASS_DEPRECATION_WARNING=1)
@@ -19,8 +18,6 @@ if(MSVC)
 	# Increase stack limit to 8 MB
 	add_link_options(/STACK:8388608,1048576)
 else()
-	# Some distros have the compilers set to use PIE by default, but RPCS3 doesn't work with PIE, so we need to disable it.
-	check_cxx_compiler_flag("-no-pie" HAS_NO_PIE)
 	check_cxx_compiler_flag("-march=native" COMPILER_SUPPORTS_MARCH_NATIVE)
 	check_cxx_compiler_flag("-msse -msse2 -mcx16" COMPILER_X86)
 	if (APPLE)
@@ -93,18 +90,12 @@ else()
 		add_compile_options(-Wno-class-memaccess)
 	endif()
 
+	# Note that this refers to binary size optimization during linking, it differs from optimization compiler level
+	add_link_options(-Wl,-O2)
+
 	if(NOT APPLE AND NOT WIN32)
 		# This hides our LLVM from mesa's LLVM, otherwise we get some unresolvable conflicts.
 		add_link_options(-Wl,--exclude-libs,ALL)
-
-		if(HAS_NO_PIE)
-			add_link_options(-no-pie)
-		endif()
-	elseif(APPLE)
-		if (CMAKE_OSX_ARCHITECTURES MATCHES "x86_64")
-			add_link_options(-Wl,-image_base,0x10000 -Wl,-pagezero_size,0x10000)
-			add_link_options(-Wl,-no_pie)
-		endif()
 	elseif(WIN32)
 		add_compile_definitions(__STDC_FORMAT_MACROS=1)
 
@@ -113,11 +104,6 @@ else()
 
 		# Increase stack limit to 8 MB
 		add_link_options(-Wl,--stack -Wl,8388608)
-
-		# For arm64 windows, the image base cannot be below 4GB or the OS rejects the binary without much explanation.
-		if(COMPILER_X86)
-			add_link_options(-Wl,--image-base,0x10000)
-		endif()
 	endif()
 
 	# Specify C++ library to use as standard C++ when using clang (not required on linux due to GNU)

buildfiles/cmake/CopyRuntimeDependencies.cmake

@@ -0,0 +1,51 @@
+# Copy remaining DLLS
+
+cmake_path(GET exe PARENT_PATH exe_dir)
+cmake_path(CONVERT "${MSYS2_CLANG_BIN}" TO_CMAKE_PATH_LIST msys2_clang_bin)
+cmake_path(CONVERT "${MSYS2_USR_BIN}" TO_CMAKE_PATH_LIST msys2_usr_bin)
+
+message(STATUS "Getting runtime dependencies for '${exe}' in '${exe_dir}'")
+message(STATUS "Dependency dirs: '${msys2_clang_bin}', '${msys2_usr_bin}'")
+
+file(GET_RUNTIME_DEPENDENCIES EXECUTABLES ${exe}
+    RESOLVED_DEPENDENCIES_VAR resolved_deps
+    UNRESOLVED_DEPENDENCIES_VAR unresolved_deps
+    DIRECTORIES ${msys2_clang_bin} ${msys2_usr_bin})
+
+foreach(dep IN LISTS resolved_deps)
+    cmake_path(GET dep FILENAME dep_filename)
+    cmake_path(GET dep PARENT_PATH dep_dir_raw)
+    cmake_path(CONVERT "${dep_dir_raw}" TO_CMAKE_PATH_LIST dep_dir)
+
+    string(COMPARE EQUAL "${dep_dir}" "${msys2_clang_bin}" is_clang_path)
+    string(COMPARE EQUAL "${dep_dir}" "${msys2_usr_bin}" is_usr_path)
+
+    set(same_path FALSE)
+    if(is_clang_path OR is_usr_path)
+        set(same_path TRUE)
+    endif()
+
+    if(same_path)
+        set(dest "${exe_dir}/${dep_filename}")
+        if(NOT EXISTS "${dest}")
+            file(COPY "${dep}" DESTINATION "${exe_dir}")
+            message(STATUS "Copied '${dep_filename}' to '${exe_dir}'")
+        else()
+            message(STATUS "Already exists: '${dest}', skipping.")
+        endif()
+    else()
+        message(STATUS "Found and ignored '${dep}' in '${dep_dir}'. Is clang path: ${is_clang_path}, is usr path: ${is_usr_path}")
+    endif()
+endforeach()
+
+# Warn about unresolved dependencies
+if(unresolved_deps)
+    message(WARNING "Unresolved dependencies:")
+    foreach(dep IN LISTS unresolved_deps)
+        cmake_path(GET dep PARENT_PATH dep_dir)
+        string(TOLOWER "${dep_dir}" dep_dir_lower)
+        if(NOT dep_dir_lower MATCHES ".*(windows[/\\]system32|windows[/\\]winsxs|program files).*")
+            message(STATUS " - ${dep_dir}/${dep}")
+        endif()
+    endforeach()
+endif()

buildfiles/cmake/FindFFMPEG.cmake

@@ -21,7 +21,7 @@
 if (FFMPEG_LIBRARIES AND FFMPEG_INCLUDE_DIR)
   # in cache already
   set(FFMPEG_FOUND TRUE)
-else (FFMPEG_LIBRARIES AND FFMPEG_INCLUDE_DIR)
+else ()
   # use pkg-config to get the directories and then use these values
   # in the FIND_PATH() and FIND_LIBRARY() calls
   find_package(PkgConfig)
@@ -31,7 +31,7 @@ else (FFMPEG_LIBRARIES AND FFMPEG_INCLUDE_DIR)
     pkg_check_modules(_FFMPEG_AVUTIL libavutil)
     pkg_check_modules(_FFMPEG_SWSCALE libswscale)
     pkg_check_modules(_FFMPEG_SWRESAMPLE libswresample)
-  endif (PKG_CONFIG_FOUND)
+  endif ()
 
   find_path(FFMPEG_AVCODEC_INCLUDE_DIR
     NAMES libavcodec/avcodec.h
@@ -64,9 +64,10 @@ else (FFMPEG_LIBRARIES AND FFMPEG_INCLUDE_DIR)
     PATHS ${_FFMPEG_SWRESAMPLE_LIBRARY_DIRS} /usr/lib /usr/local/lib /opt/local/lib /sw/lib
   )
 
-  if (FFMPEG_LIBAVCODEC AND FFMPEG_LIBAVFORMAT AND FFMPEG_LIBSWSCALE AND FFMPEG_LIBSWRESAMPLE)
-    set(FFMPEG_FOUND TRUE)
-  endif()
+  find_package_handle_standard_args(FFMPEG
+    DEFAULT_MSG
+    FFMPEG_LIBAVCODEC FFMPEG_LIBAVFORMAT FFMPEG_LIBSWSCALE FFMPEG_LIBSWRESAMPLE
+  )
 
   if (FFMPEG_FOUND)
     set(FFMPEG_INCLUDE_DIR ${FFMPEG_AVCODEC_INCLUDE_DIR})
@@ -79,17 +80,6 @@ else (FFMPEG_LIBRARIES AND FFMPEG_INCLUDE_DIR)
       ${FFMPEG_LIBSWRESAMPLE}
     )
 
-  endif (FFMPEG_FOUND)
-
-  if (FFMPEG_FOUND)
-    if (NOT FFMPEG_FIND_QUIETLY)
-      message(STATUS "Found FFMPEG or Libav: ${FFMPEG_LIBRARIES}, ${FFMPEG_INCLUDE_DIR}")
-    endif (NOT FFMPEG_FIND_QUIETLY)
-  else (FFMPEG_FOUND)
-    if (FFMPEG_FIND_REQUIRED)
-      message(FATAL_ERROR "Could not find libavcodec or libavformat or libavutil or libswscale or libswresample")
-    endif (FFMPEG_FIND_REQUIRED)
-  endif (FFMPEG_FOUND)
-
-endif (FFMPEG_LIBRARIES AND FFMPEG_INCLUDE_DIR)
+  endif ()
 
+endif ()

buildfiles/cmake/FindWayland.cmake

@@ -49,11 +49,11 @@ IF (NOT WIN32)
 
   include(FindPackageHandleStandardArgs)
 
-  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND_CLIENT  DEFAULT_MSG  WAYLAND_CLIENT_LIBRARIES  WAYLAND_CLIENT_INCLUDE_DIR)
-  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND_SERVER  DEFAULT_MSG  WAYLAND_SERVER_LIBRARIES  WAYLAND_SERVER_INCLUDE_DIR)
-  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND_EGL     DEFAULT_MSG  WAYLAND_EGL_LIBRARIES     WAYLAND_EGL_INCLUDE_DIR)
-  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND_CURSOR  DEFAULT_MSG  WAYLAND_CURSOR_LIBRARIES  WAYLAND_CURSOR_INCLUDE_DIR)
-  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND         DEFAULT_MSG  WAYLAND_LIBRARIES         WAYLAND_INCLUDE_DIR)
+  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND_CLIENT  REQUIRED_VARS  WAYLAND_CLIENT_LIBRARIES  WAYLAND_CLIENT_INCLUDE_DIR NAME_MISMATCHED)
+  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND_SERVER  REQUIRED_VARS  WAYLAND_SERVER_LIBRARIES  WAYLAND_SERVER_INCLUDE_DIR NAME_MISMATCHED)
+  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND_EGL     REQUIRED_VARS  WAYLAND_EGL_LIBRARIES     WAYLAND_EGL_INCLUDE_DIR NAME_MISMATCHED)
+  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND_CURSOR  REQUIRED_VARS  WAYLAND_CURSOR_LIBRARIES  WAYLAND_CURSOR_INCLUDE_DIR NAME_MISMATCHED)
+  FIND_PACKAGE_HANDLE_STANDARD_ARGS(WAYLAND         REQUIRED_VARS  WAYLAND_LIBRARIES         WAYLAND_INCLUDE_DIR NAME_MISMATCHED)
 
   MARK_AS_ADVANCED(
         WAYLAND_INCLUDE_DIR         WAYLAND_LIBRARIES

buildfiles/cmake/TCDarwinARM64.cmake

@@ -1,2 +0,0 @@
-set(CMAKE_SYSTEM_NAME Darwin)
-set(CMAKE_SYSTEM_PROCESSOR arm64)

buildfiles/msvc/rpcs3_default.props

@@ -3,10 +3,12 @@
   <ImportGroup Label="PropertySheets" />
   <PropertyGroup Label="UserMacros" />
   <PropertyGroup>
-    <IncludePath>.\;..\;..\3rdparty\asmjit\asmjit\src;..\..\3rdparty\yaml-cpp\yaml-cpp\include;..\3rdparty\ffmpeg\include;$(VC_IncludePath);$(WindowsSDK_IncludePath);$(UniversalCRT_IncludePath);..\3rdparty\libpng\libpng;..\3rdparty\GL;..\3rdparty\stblib\stb;..\3rdparty\openal\openal-soft\include\AL;..\3rdparty\pugixml\src;..\3rdparty\hidapi\hidapi</IncludePath>
+    <IncludePath>.\;..\;$(SolutionDir)3rdparty\asmjit\asmjit\src;$(SolutionDir)3rdparty\yaml-cpp\yaml-cpp\include;$(SolutionDir)3rdparty\ffmpeg\include;$(VC_IncludePath);$(WindowsSDK_IncludePath);$(UniversalCRT_IncludePath);$(SolutionDir)3rdparty\libpng\libpng;$(SolutionDir)3rdparty\GL;$(SolutionDir)3rdparty\stblib\stb;$(SolutionDir)3rdparty\openal\openal-soft\include\AL;$(SolutionDir)3rdparty\pugixml\src;$(SolutionDir)3rdparty\hidapi\hidapi</IncludePath>
     <OutDir>$(SolutionDir)build\lib\$(Configuration)-$(Platform)\</OutDir>
     <LibraryPath>$(SolutionDir)build\lib\$(Configuration)-$(Platform)\;$(UniversalCRT_LibraryPath_x64);$(LibraryPath)</LibraryPath>
     <IntDir>$(SolutionDir)build\tmp\$(ProjectName)-$(Configuration)-$(Platform)\</IntDir>
+    <GTestPath>$(SolutionDir)packages\Microsoft.googletest.v140.windesktop.msvcstl.static.rt-static.1.8.1.7\build\native\Microsoft.googletest.v140.windesktop.msvcstl.static.rt-static.targets</GTestPath>
+    <GTestInstalled Condition="Exists('$(GTestPath)')">true</GTestInstalled>
   </PropertyGroup>
   <ItemDefinitionGroup>
     <Lib>
@@ -130,7 +132,7 @@
         LLVMX86TargetMCA.lib;
         LLVMXRay.lib;
       </AdditionalDependencies>
-      <AdditionalLibraryDirectories>..\3rdparty\ffmpeg\lib\windows\x86_64</AdditionalLibraryDirectories>
+      <AdditionalLibraryDirectories>$(SolutionDir)3rdparty\ffmpeg\lib\windows\x86_64</AdditionalLibraryDirectories>
       <StackReserveSize>8388608</StackReserveSize>
       <StackCommitSize>1048576</StackCommitSize>
     </Link>

rpcs3.sln

@@ -107,6 +107,13 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "openal-soft", "3rdparty\ope
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "fusion", "3rdparty\fusion\fusion.vcxproj", "{3C67A2FF-4710-402A-BE3E-31B0CB0576DF}"
 EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "rpcs3.test", "rpcs3.test", "{02EA681E-C7D8-13C7-8484-4AC65E1B71E8}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rpcs3_test", "rpcs3\tests\rpcs3_test.vcxproj", "{D1CBF84E-07F8-4ACB-9CD2-BD205FDEEE1E}"
+	ProjectSection(ProjectDependencies) = postProject
+		{70CD65B0-91D6-4FAE-9A7B-4AF55D0D1B12} = {70CD65B0-91D6-4FAE-9A7B-4AF55D0D1B12}
+	EndProjectSection
+EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
 		Debug|x64 = Debug|x64
@@ -144,7 +151,9 @@ Global
 		{60F89955-91C6-3A36-8000-13C592FEC2DF}.Release|x64.ActiveCfg = Release|x64
 		{60F89955-91C6-3A36-8000-13C592FEC2DF}.Release|x64.Build.0 = Release|x64
 		{8F85B6CC-250F-4ACA-A617-E820A74E3E3C}.Debug|x64.ActiveCfg = Debug|x64
+		{8F85B6CC-250F-4ACA-A617-E820A74E3E3C}.Debug|x64.Build.0 = Debug|x64
 		{8F85B6CC-250F-4ACA-A617-E820A74E3E3C}.Release|x64.ActiveCfg = Release|x64
+		{8F85B6CC-250F-4ACA-A617-E820A74E3E3C}.Release|x64.Build.0 = Release|x64
 		{3EE5F075-B546-42C4-B6A8-E3CCEF38B78D}.Debug|x64.ActiveCfg = Debug|x64
 		{3EE5F075-B546-42C4-B6A8-E3CCEF38B78D}.Debug|x64.Build.0 = Debug|x64
 		{3EE5F075-B546-42C4-B6A8-E3CCEF38B78D}.Release|x64.ActiveCfg = Release|x64
@@ -219,6 +228,10 @@ Global
 		{3C67A2FF-4710-402A-BE3E-31B0CB0576DF}.Debug|x64.Build.0 = Debug|x64
 		{3C67A2FF-4710-402A-BE3E-31B0CB0576DF}.Release|x64.ActiveCfg = Release|x64
 		{3C67A2FF-4710-402A-BE3E-31B0CB0576DF}.Release|x64.Build.0 = Release|x64
+		{D1CBF84E-07F8-4ACB-9CD2-BD205FDEEE1E}.Debug|x64.ActiveCfg = Debug|x64
+		{D1CBF84E-07F8-4ACB-9CD2-BD205FDEEE1E}.Debug|x64.Build.0 = Debug|x64
+		{D1CBF84E-07F8-4ACB-9CD2-BD205FDEEE1E}.Release|x64.ActiveCfg = Release|x64
+		{D1CBF84E-07F8-4ACB-9CD2-BD205FDEEE1E}.Release|x64.Build.0 = Release|x64
 	EndGlobalSection
 	GlobalSection(SolutionProperties) = preSolution
 		HideSolutionNode = FALSE
@@ -232,7 +245,7 @@ Global
 		{EB33566E-DA7F-4D28-9077-88C0B7C77E35} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
 		{D6973076-9317-4EF2-A0B8-B7A18AC0713E} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
 		{60F89955-91C6-3A36-8000-13C592FEC2DF} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
-		{8F85B6CC-250F-4ACA-A617-E820A74E3E3C} = {B0AC29FD-7B01-4B5E-9C8D-0A081E4C5668}
+		{8F85B6CC-250F-4ACA-A617-E820A74E3E3C} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
 		{3EE5F075-B546-42C4-B6A8-E3CCEF38B78D} = {10FBF193-D532-4CCF-B875-4C7091A7F6C2}
 		{FDC361C5-7734-493B-8CFB-037308B35122} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
 		{A107C21C-418A-4697-BB10-20C3AA60E2E4} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
@@ -252,6 +265,7 @@ Global
 		{5B146DEA-9ACE-4D32-A7FD-3F42464DD69C} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
 		{8846A9AA-5539-4C91-8301-F54260E1A07A} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
 		{3C67A2FF-4710-402A-BE3E-31B0CB0576DF} = {6C3B64A0-8F8A-4DC4-8C0B-D71EBEED7FA8}
+		{D1CBF84E-07F8-4ACB-9CD2-BD205FDEEE1E} = {02EA681E-C7D8-13C7-8484-4AC65E1B71E8}
 	EndGlobalSection
 	GlobalSection(ExtensibilityGlobals) = postSolution
 		SolutionGuid = {06CC7920-E085-4B81-9582-8DE8AAD42510}

rpcs3/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Define GNU standard installation directories
+# Define GNU standard installation directories
 include(GNUInstallDirs)
 
 # Generate git-version.h at build time.
@@ -13,23 +13,23 @@ set(CMAKE_CXX_STANDARD 20)
 set(ADDITIONAL_LIBS "")
 if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
     #on some Linux distros shm_unlink and similar functions are in librt only
-    set(ADDITIONAL_LIBS ${ADDITIONAL_LIBS} "rt")
+    list(APPEND ADDITIONAL_LIBS "rt")
 elseif(NOT WIN32 AND NOT CMAKE_CXX_FLAGS MATCHES "LIBICONV_PLUG")
     #it seems like glibc includes the iconv functions we use but other libc
     #implementations like the one on OSX don't seem implement them
-    set(ADDITIONAL_LIBS ${ADDITIONAL_LIBS} "iconv")
+    list(APPEND ADDITIONAL_LIBS "iconv")
 endif()
 
 if(UNIX AND NOT APPLE AND NOT ANDROID)
-    add_definitions(-DDATADIR="${CMAKE_INSTALL_FULL_DATADIR}/rpcs3")
+    add_compile_definitions(DATADIR="${CMAKE_INSTALL_FULL_DATADIR}/rpcs3")
     # Optionally enable X11 for window management
     find_package(X11)
     if(X11_FOUND)
-        add_definitions(-DHAVE_X11)
+        add_compile_definitions(HAVE_X11)
     endif()
     find_package(Wayland)
     if(WAYLAND_FOUND)
-        add_definitions(-DHAVE_WAYLAND)
+        add_compile_definitions(HAVE_WAYLAND)
     endif()
 endif()
 
@@ -51,6 +51,61 @@ endif()
 gen_git_version(${CMAKE_CURRENT_SOURCE_DIR})
 
 if (NOT ANDROID)
+    # Build rpcs3_lib
+    add_library(rpcs3_lib STATIC)
+
+    if(WIN32)
+        target_compile_definitions(rpcs3_lib PRIVATE UNICODE _UNICODE)
+    endif()
+
+    set_target_properties(rpcs3_lib
+        PROPERTIES
+            AUTOMOC ON
+            AUTOUIC ON)
+
+    target_link_libraries(rpcs3_lib
+        PUBLIC
+            3rdparty::stblib
+            3rdparty::libevdev
+            rpcs3_emu
+        PRIVATE
+            rpcs3_ui
+            3rdparty::discordRPC
+            3rdparty::qt6
+            3rdparty::hidapi
+            3rdparty::libusb
+            3rdparty::wolfssl
+            3rdparty::libcurl
+            3rdparty::zlib
+            3rdparty::opencv
+            3rdparty::fusion
+            ${ADDITIONAL_LIBS})
+
+    # Unix display manager
+    if(X11_FOUND)
+        target_link_libraries(rpcs3_lib PRIVATE X11::X11)
+    elseif(USE_VULKAN AND UNIX AND NOT WAYLAND_FOUND AND NOT APPLE AND NOT ANDROID)
+        # Wayland has been checked in 3rdparty/CMakeLists.txt already.
+        message(FATAL_ERROR "RPCS3 requires either X11 or Wayland (or both) for Vulkan.")
+    endif()
+
+    if(UNIX)
+        set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
+        find_package(Threads REQUIRED)
+        target_link_libraries(rpcs3_lib PRIVATE Threads::Threads)
+    endif()
+
+    if(WIN32)
+        target_link_libraries(rpcs3_lib PRIVATE ws2_32 Iphlpapi Winmm Psapi gdi32 setupapi)
+    else()
+        target_link_libraries(rpcs3_lib PRIVATE ${CMAKE_DL_LIBS})
+    endif()
+
+    if(USE_PRECOMPILED_HEADERS)
+        target_precompile_headers(rpcs3_lib PRIVATE stdafx.h)
+    endif()
+
+    # Build rpcs3 executable
     if(WIN32)
         add_executable(rpcs3 WIN32)
         target_sources(rpcs3 PRIVATE rpcs3.rc)
@@ -68,84 +123,18 @@ if (NOT ANDROID)
 
     target_sources(rpcs3
         PRIVATE
-        display_sleep_control.cpp
-        headless_application.cpp
-        main.cpp
-        main_application.cpp
-        module_verifier.cpp
-        rpcs3_version.cpp
-        stb_image.cpp
-        stdafx.cpp
-
-        Input/basic_keyboard_handler.cpp
-        Input/basic_mouse_handler.cpp
-        Input/ds3_pad_handler.cpp
-        Input/ds4_pad_handler.cpp
-        Input/dualsense_pad_handler.cpp
-        Input/evdev_joystick_handler.cpp
-        Input/evdev_gun_handler.cpp
-        Input/gui_pad_thread.cpp
-        Input/hid_pad_handler.cpp
-        Input/keyboard_pad_handler.cpp
-        Input/mm_joystick_handler.cpp
-        Input/pad_thread.cpp
-        Input/product_info.cpp
-        Input/ps_move_calibration.cpp
-        Input/ps_move_config.cpp
-        Input/ps_move_handler.cpp
-        Input/ps_move_tracker.cpp
-        Input/raw_mouse_config.cpp
-        Input/raw_mouse_handler.cpp
-        Input/sdl_pad_handler.cpp
-        Input/skateboard_pad_handler.cpp
-        Input/xinput_pad_handler.cpp
+            main.cpp
     )
 
-    set_target_properties(rpcs3
-        PROPERTIES
-            AUTOMOC ON
-            AUTOUIC ON)
-
     target_link_libraries(rpcs3
         PRIVATE
-            rpcs3_emu
-            rpcs3_ui
-            3rdparty::discordRPC
-            3rdparty::qt6
-            3rdparty::hidapi
-            3rdparty::libusb
-            3rdparty::wolfssl
-            3rdparty::libcurl
-            3rdparty::zlib
-            3rdparty::opencv
-            3rdparty::fusion
-            ${ADDITIONAL_LIBS})
-
-    # Unix display manager
-    if(X11_FOUND)
-        target_link_libraries(rpcs3 PRIVATE X11::X11)
-    elseif(USE_VULKAN AND UNIX AND NOT WAYLAND_FOUND AND NOT APPLE AND NOT ANDROID)
-        # Wayland has been checked in 3rdparty/CMakeLists.txt already.
-        message(FATAL_ERROR "RPCS3 requires either X11 or Wayland (or both) for Vulkan.")
-    endif()
-
-    if(UNIX)
-        set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
-        find_package(Threads REQUIRED)
-        target_link_libraries(rpcs3 PRIVATE Threads::Threads)
-    endif()
-
-    if(WIN32)
-        target_link_libraries(rpcs3 PRIVATE bcrypt ws2_32 Iphlpapi Winmm Psapi gdi32 setupapi pdh)
-    else()
-        target_link_libraries(rpcs3 PRIVATE ${CMAKE_DL_LIBS})
-    endif()
+            rpcs3_lib
+    )
 
     if(USE_PRECOMPILED_HEADERS)
         target_precompile_headers(rpcs3 PRIVATE stdafx.h)
     endif()
 
-
     # Copy icons to executable directory
     if(APPLE)
         if (CMAKE_BUILD_TYPE MATCHES "Debug" OR CMAKE_BUILD_TYPE MATCHES "RelWithDebInfo")
@@ -158,21 +147,18 @@ if (NOT ANDROID)
             COMMAND ${CMAKE_COMMAND} -E copy ${CMAKE_CURRENT_SOURCE_DIR}/rpcs3.icns $<TARGET_FILE_DIR:rpcs3>/../Resources/rpcs3.icns
             COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/Icons $<TARGET_FILE_DIR:rpcs3>/../Resources/Icons
             COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/GuiConfigs $<TARGET_FILE_DIR:rpcs3>/../Resources/GuiConfigs
-            COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/git $<TARGET_FILE_DIR:rpcs3>/../Resources/git
             COMMAND "${MACDEPLOYQT_EXECUTABLE}" "${PROJECT_BINARY_DIR}/bin/rpcs3.app" "${QT_DEPLOY_FLAGS}")
     elseif(UNIX)
         add_custom_command(TARGET rpcs3 POST_BUILD
             COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/Icons $<TARGET_FILE_DIR:rpcs3>/Icons
-            COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/GuiConfigs $<TARGET_FILE_DIR:rpcs3>/GuiConfigs
-            COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/git $<TARGET_FILE_DIR:rpcs3>/git)
+            COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/GuiConfigs $<TARGET_FILE_DIR:rpcs3>/GuiConfigs)
     elseif(WIN32)
         add_custom_command(TARGET rpcs3 POST_BUILD
-            COMMAND ${CMAKE_COMMAND} -E copy $<TARGET_FILE:OpenAL::OpenAL> $<TARGET_FILE_DIR:rpcs3>
             COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/Icons $<TARGET_FILE_DIR:rpcs3>/Icons
             COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/GuiConfigs $<TARGET_FILE_DIR:rpcs3>/GuiConfigs
-            COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/git $<TARGET_FILE_DIR:rpcs3>/git
+            COMMAND ${CMAKE_COMMAND} -E copy_directory ${CMAKE_SOURCE_DIR}/bin/test $<TARGET_FILE_DIR:rpcs3>/test
             COMMAND "${WINDEPLOYQT_EXECUTABLE}" --no-compiler-runtime --no-opengl-sw --no-patchqt
-                --no-translations --no-system-d3d-compiler --no-system-dxc-compiler --no-ffmpeg --no-quick-import
+                --no-translations --no-system-d3d-compiler --no-system-dxc-compiler --no-quick-import
                 --plugindir "$<IF:$<CXX_COMPILER_ID:MSVC>,$<TARGET_FILE_DIR:rpcs3>/plugins,$<TARGET_FILE_DIR:rpcs3>/share/qt6/plugins>"
                 --verbose 0 "$<TARGET_FILE:rpcs3>")
     endif()
@@ -195,9 +181,48 @@ if (NOT ANDROID)
             DESTINATION ${CMAKE_INSTALL_DATADIR}/rpcs3)
         install(DIRECTORY ../bin/GuiConfigs
             DESTINATION ${CMAKE_INSTALL_DATADIR}/rpcs3)
-        install(DIRECTORY ../bin/git
-            DESTINATION ${CMAKE_INSTALL_DATADIR}/rpcs3)
         install(DIRECTORY ../bin/test
             DESTINATION ${CMAKE_INSTALL_DATADIR}/rpcs3)
     endif()
 endif()
+
+# Unit tests
+if(BUILD_RPCS3_TESTS)
+    find_package(GTest REQUIRED)
+
+    message(STATUS "Building unit tests...")
+
+    add_executable(rpcs3_test)
+
+    target_sources(rpcs3_test
+        PRIVATE
+            tests/test.cpp
+            tests/test_fmt.cpp
+            tests/test_simple_array.cpp
+            tests/test_address_range.cpp
+    )
+
+    target_link_libraries(rpcs3_test
+        PRIVATE
+            rpcs3_lib
+            rpcs3_emu
+            GTest::gtest
+    )
+
+    target_include_directories(rpcs3_test
+        PUBLIC
+            ${CMAKE_CURRENT_SOURCE_DIR}
+            ${CMAKE_CURRENT_SOURCE_DIR}/..
+    )
+
+    include(GoogleTest)
+    gtest_discover_tests(rpcs3_test)
+
+    if(RUN_RPCS3_TESTS)
+        add_custom_target(run_tests
+            ALL
+            COMMAND ${CMAKE_CTEST_COMMAND} -j -VV --output-on-failure
+            DEPENDS rpcs3_test
+     )
+    endif()
+endif()

rpcs3/Crypto/unself.cpp

@@ -1336,17 +1336,19 @@ static fs::file CheckDebugSelf(const fs::file& s)
 		// Get the real elf offset.
 		s.seek(0x10);
 
-		// Start at the real elf offset.
-		s.seek(key_version == 0x80 ? +s.read<be_t<u64>>() : +s.read<le_t<u64>>());
+		// Read the real elf offset.
+		usz read_pos = key_version == 0x80 ? +s.read<be_t<u64>>() : +s.read<le_t<u64>>();
 
 		// Write the real ELF file back.
 		fs::file e = fs::make_stream<std::vector<u8>>();
 
 		// Copy the data.
-		char buf[2048];
-		while (const u64 size = s.read(buf, 2048))
+		std::vector<u8> buf(std::min<usz>(s.size(), 4096));
+
+		while (const u64 size = s.read_at(read_pos, buf.data(), buf.size()))
 		{
-			e.write(buf, size);
+			e.write(buf.data(), size);
+			read_pos += size;
 		}
 
 		return e;
@@ -1371,7 +1373,10 @@ fs::file decrypt_self(const fs::file& elf_or_self, const u8* klic_key, SelfAddit
 	elf_or_self.seek(0);
 
 	// Check SELF header first. Check for a debug SELF.
-	if (elf_or_self.size() >= 4 && elf_or_self.read<u32>() == "SCE\0"_u32)
+	u32 file_type = umax;
+	elf_or_self.read_at(0, &file_type, sizeof(file_type));
+
+	if (file_type == "SCE\0"_u32)
 	{
 		if (fs::file res = CheckDebugSelf(elf_or_self))
 		{
@@ -1409,6 +1414,23 @@ fs::file decrypt_self(const fs::file& elf_or_self, const u8* klic_key, SelfAddit
 		// Make a new ELF file from this SELF.
 		return self_dec.MakeElf(isElf32);
 	}
+	else if (Emu.GetBoot().ends_with(".elf") || Emu.GetBoot().ends_with(".ELF"))
+	{
+		// Write the file back if the main executable is not signed
+		fs::file e = fs::make_stream<std::vector<u8>>();
+
+		// Copy the data.
+		std::vector<u8> buf(std::min<usz>(elf_or_self.size(), 4096));
+
+		usz read_pos = 0;
+		while (const u64 size = elf_or_self.read_at(read_pos, buf.data(), buf.size()))
+		{
+			e.write(buf.data(), size);
+			read_pos += size;
+		}
+
+		return e;
+	}
 
 	return {};
 }

rpcs3/Emu/Audio/XAudio2/XAudio2Backend.cpp

@@ -337,7 +337,7 @@ f64 XAudio2Backend::GetCallbackFrameLen()
 	return std::max<f64>(min_latency, _10ms); // 10ms is the minimum for XAudio
 }
 
-void XAudio2Backend::OnVoiceProcessingPassStart(UINT32 BytesRequired)
+void XAudio2Backend::OnVoiceProcessingPassStart(UINT32 BytesRequired) noexcept
 {
 	std::unique_lock lock(m_cb_mutex, std::defer_lock);
 	if (BytesRequired && !m_reset_req.observe() && lock.try_lock_for(std::chrono::microseconds{50}) && m_write_callback && m_playing)
@@ -366,7 +366,7 @@ void XAudio2Backend::OnVoiceProcessingPassStart(UINT32 BytesRequired)
 	}
 }
 
-void XAudio2Backend::OnCriticalError(HRESULT Error)
+void XAudio2Backend::OnCriticalError(HRESULT Error) noexcept
 {
 	XAudio.error("OnCriticalError() called: %s (0x%08x)", std::system_category().message(Error), static_cast<u32>(Error));
 

rpcs3/Emu/Audio/XAudio2/XAudio2Backend.h

@@ -54,18 +54,18 @@ private:
 	atomic_t<bool> m_reset_req = false;
 
 	// XAudio voice callbacks
-	void OnVoiceProcessingPassStart(UINT32 BytesRequired) override;
-	void OnVoiceProcessingPassEnd() override {}
-	void OnStreamEnd() override {}
-	void OnBufferStart(void* /* pBufferContext */) override {}
-	void OnBufferEnd(void* /* pBufferContext*/) override {}
-	void OnLoopEnd(void* /* pBufferContext */) override {}
-	void OnVoiceError(void* /* pBufferContext */, HRESULT /* Error */) override {}
+	void OnVoiceProcessingPassStart(UINT32 BytesRequired) noexcept override;
+	void OnVoiceProcessingPassEnd() noexcept override {}
+	void OnStreamEnd() noexcept override {}
+	void OnBufferStart(void* /* pBufferContext */) noexcept override {}
+	void OnBufferEnd(void* /* pBufferContext*/) noexcept override {}
+	void OnLoopEnd(void* /* pBufferContext */) noexcept override {}
+	void OnVoiceError(void* /* pBufferContext */, HRESULT /* Error */) noexcept override {}
 
 	// XAudio engine callbacks
-	void OnProcessingPassStart() override {};
-	void OnProcessingPassEnd() override {};
-	void OnCriticalError(HRESULT Error) override;
+	void OnProcessingPassStart() noexcept override {};
+	void OnProcessingPassEnd() noexcept override {};
+	void OnCriticalError(HRESULT Error) noexcept override;
 
 	// IMMNotificationClient callbacks
 	IFACEMETHODIMP_(ULONG) AddRef() override { return 1; };

rpcs3/Emu/CMakeLists.txt

@@ -5,6 +5,7 @@ add_library(rpcs3_emu STATIC
     localized_string.cpp
     savestate_utils.cpp
     scoped_progress_dialog.cpp
+    stb_image.cpp
     System.cpp
     system_config.cpp
     system_config_types.cpp
@@ -28,21 +29,14 @@ if(USE_ASAN)
     set_source_files_properties(../../Utilities/Thread.cpp PROPERTIES COMPILE_DEFINITIONS USE_ASAN)
 endif()
 
+if(NOT USE_SYSTEM_OPENAL)
+    target_compile_definitions(rpcs3_emu PUBLIC AL_LIBTYPE_STATIC)
+endif()
+
 if(HAS_MEMORY_BREAKPOINTS)
     target_compile_definitions(rpcs3_emu PRIVATE RPCS3_HAS_MEMORY_BREAKPOINTS)
 endif()
 
-target_link_libraries(rpcs3_emu
-    PRIVATE
-        3rdparty::zlib 3rdparty::yaml-cpp 3rdparty::zstd
-    PUBLIC
-        3rdparty::libevdev 3rdparty::flatbuffers)
-
-
-find_package(Threads REQUIRED)
-target_link_libraries(rpcs3_emu
-    PUBLIC Threads::Threads)
-
 # For stdafx.h
 target_include_directories(rpcs3_emu
     PUBLIC
@@ -95,10 +89,6 @@ endif()
 
 target_include_directories(rpcs3_emu PUBLIC "${CMAKE_SOURCE_DIR}")
 
-target_link_libraries(rpcs3_emu
-    PUBLIC
-        3rdparty::pugixml)
-
 set_source_files_properties("../../Utilities/JITLLVM.cpp" "../../Utilities/JITASM.cpp" PROPERTIES
     COMPILE_FLAGS "$<IF:$<CXX_COMPILER_ID:MSVC>,/GR-,-fno-rtti>"
     SKIP_PRECOMPILE_HEADERS ON
@@ -169,24 +159,9 @@ if(WIN32)
         Audio/XAudio2/xaudio2_enumerator.cpp
     )
     target_compile_definitions(rpcs3_emu PRIVATE UNICODE _UNICODE _WIN32_WINNT=0x0A00)
+    target_link_libraries(rpcs3_emu PRIVATE pdh bcrypt)
 endif()
 
-target_link_libraries(rpcs3_emu
-    PUBLIC
-        3rdparty::openal)
-
-target_link_libraries(rpcs3_emu
-    PUBLIC
-        3rdparty::cubeb)
-
-target_link_libraries(rpcs3_emu
-    PUBLIC
-        3rdparty::soundtouch)
-
-target_link_libraries(rpcs3_emu
-    PUBLIC
-        3rdparty::miniupnpc)
-
 # Cell
 target_sources(rpcs3_emu PRIVATE
     Cell/ErrorCodes.cpp
@@ -400,11 +375,6 @@ if(NOT MSVC)
     )
 endif()
 
-target_link_libraries(rpcs3_emu
-    PRIVATE
-        3rdparty::stblib 3rdparty::libpng)
-
-
 # CPU
 target_sources(rpcs3_emu PRIVATE
     CPU/CPUThread.cpp
@@ -420,15 +390,13 @@ if(CMAKE_SYSTEM_PROCESSOR MATCHES "ARM64|arm64|aarch64")
     )
 endif()
 
-target_link_libraries(rpcs3_emu
-    PUBLIC 3rdparty::llvm 3rdparty::asmjit)
-
 
 # Io
 target_sources(rpcs3_emu PRIVATE
     Io/Buzz.cpp
     Io/camera_config.cpp
     Io/Dimensions.cpp
+    Io/evdev_gun_handler.cpp
     Io/GameTablet.cpp
     Io/GHLtar.cpp
     Io/GunCon3.cpp
@@ -454,10 +422,8 @@ target_sources(rpcs3_emu PRIVATE
     Io/usb_device.cpp
     Io/usb_vfs.cpp
     Io/usio.cpp
-)
-
-target_link_libraries(rpcs3_emu PRIVATE
-    3rdparty::rtmidi
+    Io/LogitechG27.cpp
+    Io/LogitechG27Config.cpp
 )
 
 # Np
@@ -546,8 +512,10 @@ target_sources(rpcs3_emu PRIVATE
     RSX/Overlays/overlay_trophy_notification.cpp
     RSX/Overlays/overlay_user_list_dialog.cpp
     RSX/Overlays/overlay_utils.cpp
+    RSX/Overlays/overlay_video.cpp
     RSX/Overlays/Shaders/shader_loading_dialog.cpp
     RSX/Overlays/Shaders/shader_loading_dialog_native.cpp
+    RSX/Program/CgBinaryProgram.cpp
     RSX/Program/CgBinaryFragmentProgram.cpp
     RSX/Program/CgBinaryVertexProgram.cpp
     RSX/Program/FragmentProgramDecompiler.cpp
@@ -626,6 +594,7 @@ if(TARGET 3rdparty_vulkan)
         RSX/VK/VKCommonDecompiler.cpp
         RSX/VK/VKCommonPipelineLayout.cpp
         RSX/VK/VKCompute.cpp
+        RSX/VK/VKDataHeapManager.cpp
         RSX/VK/VKDMA.cpp
         RSX/VK/VKDraw.cpp
         RSX/VK/VKFormats.cpp
@@ -648,17 +617,39 @@ if(TARGET 3rdparty_vulkan)
         RSX/VK/VKVertexBuffers.cpp
         RSX/VK/VKVertexProgram.cpp
         RSX/VK/VKTextureCache.cpp
+        RSX/VK/VulkanAPI.cpp
     )
 endif()
 
+find_package(Threads REQUIRED)
+
 target_link_libraries(rpcs3_emu
     PUBLIC
-        3rdparty::ffmpeg 3rdparty::sdl3
-        3rdparty::opengl 3rdparty::stblib
-        3rdparty::vulkan 3rdparty::glew
-        3rdparty::libusb 3rdparty::wolfssl
+        3rdparty::llvm
+        3rdparty::asmjit
+        3rdparty::ffmpeg
+        3rdparty::sdl3
+        3rdparty::opengl
+        3rdparty::stblib
+        3rdparty::vulkan
+        3rdparty::glew
+        3rdparty::libusb
+        3rdparty::wolfssl
+        3rdparty::openal
+        3rdparty::cubeb
+        3rdparty::soundtouch
+        3rdparty::miniupnpc
+        3rdparty::libevdev
+        3rdparty::flatbuffers
+        3rdparty::pugixml
+        Threads::Threads
     PRIVATE
         3rdparty::glslang
+        3rdparty::libpng
+        3rdparty::rtmidi
+        3rdparty::yaml-cpp
+        3rdparty::zlib
+        3rdparty::zstd
 )
 
 if(APPLE)

rpcs3/Emu/CPU/CPUTranslator.h

@@ -434,7 +434,7 @@ struct llvm_value_t<T*> : llvm_value_t<T>
 
 	static llvm::Type* get_type(llvm::LLVMContext& context)
 	{
-		return llvm_value_t<T>::get_type(context)->getPointerTo();
+		return llvm::PointerType::getUnqual(context);
 	}
 };
 

rpcs3/Emu/Cell/Modules/cellAudio.cpp

@@ -301,7 +301,7 @@ void audio_ringbuffer::commit_data(f32* buf, u32 sample_cnt)
 	if (g_recording_mode != recording_mode::stopped)
 	{
 		utils::video_provider& provider = g_fxo->get<utils::video_provider>();
-		provider.present_samples(reinterpret_cast<u8*>(buf), sample_cnt, cfg.audio_channels);
+		provider.present_samples(reinterpret_cast<const u8*>(buf), sample_cnt, cfg.audio_channels);
 	}
 
 	// Downmix if necessary

rpcs3/Emu/Cell/Modules/cellAudio.h

@@ -195,7 +195,7 @@ struct audio_port
 	// Handle copy ctor of atomic var
 	audio_port(const audio_port& r)
 	{
-		std::memcpy(this, &r, sizeof(r));
+		std::memcpy(static_cast<void*>(this), &r, sizeof(r));
 	}
 
 	ENABLE_BITWISE_SERIALIZATION;

rpcs3/Emu/Cell/Modules/cellAudioIn.h

@@ -75,7 +75,7 @@ struct CellAudioInDeviceInfo
 	u8 reserved[12];
 	be_t<u64> deviceId;
 	be_t<u64> type;
-	char name[64];
+	char name[64]; // Not necessarily null terminated!
 	CellAudioInSoundMode availableModes[16];
 };
 

rpcs3/Emu/Cell/Modules/cellAvconfExt.cpp

@@ -38,11 +38,17 @@ void fmt_class_string<CellAudioInError>::format(std::string& out, u64 arg)
 struct avconf_manager
 {
 	shared_mutex mutex;
-	std::vector<CellAudioInDeviceInfo> devices;
+
+	struct device_info
+	{
+		CellAudioInDeviceInfo info {};
+		std::string full_device_name; // The device name may be too long for CellAudioInDeviceInfo, so we additionally save the full name.
+	};
+	std::vector<device_info> devices;
 	CellAudioInDeviceMode inDeviceMode = CELL_AUDIO_IN_SINGLE_DEVICE_MODE; // TODO: use somewhere
 
 	void copy_device_info(u32 num, vm::ptr<CellAudioInDeviceInfo> info) const;
-	std::optional<CellAudioInDeviceInfo> get_device_info(vm::cptr<char> name) const;
+	std::optional<device_info> get_device_info(vm::cptr<char> name) const;
 
 	avconf_manager();
 
@@ -62,78 +68,89 @@ avconf_manager::avconf_manager()
 		switch (g_cfg.audio.microphone_type)
 		{
 		case microphone_handler::standard:
+		{
 			for (u32 index = 0; index < mic_list.size(); index++)
 			{
-				devices.emplace_back();
-
-				devices[curindex].portType                  = CELL_AUDIO_IN_PORT_USB;
-				devices[curindex].availableModeCount        = 1;
-				devices[curindex].state                     = CELL_AUDIO_IN_DEVICE_STATE_AVAILABLE;
-				devices[curindex].deviceId                  = 0xE11CC0DE + curindex;
-				devices[curindex].type                      = 0xC0DEE11C;
-				devices[curindex].availableModes[0].type    = CELL_AUDIO_IN_CODING_TYPE_LPCM;
-				devices[curindex].availableModes[0].channel = CELL_AUDIO_IN_CHNUM_2;
-				devices[curindex].availableModes[0].fs      = CELL_AUDIO_IN_FS_8KHZ | CELL_AUDIO_IN_FS_12KHZ | CELL_AUDIO_IN_FS_16KHZ | CELL_AUDIO_IN_FS_24KHZ | CELL_AUDIO_IN_FS_32KHZ | CELL_AUDIO_IN_FS_48KHZ;
-				devices[curindex].deviceNumber              = curindex;
-				strcpy_trunc(devices[curindex].name, mic_list[index]);
+				device_info device {};
+				device.info.portType                  = CELL_AUDIO_IN_PORT_USB;
+				device.info.availableModeCount        = 1;
+				device.info.state                     = CELL_AUDIO_IN_DEVICE_STATE_AVAILABLE;
+				device.info.deviceId                  = 0xE11CC0DE + curindex;
+				device.info.type                      = 0xC0DEE11C;
+				device.info.availableModes[0].type    = CELL_AUDIO_IN_CODING_TYPE_LPCM;
+				device.info.availableModes[0].channel = CELL_AUDIO_IN_CHNUM_2;
+				device.info.availableModes[0].fs      = CELL_AUDIO_IN_FS_8KHZ | CELL_AUDIO_IN_FS_12KHZ | CELL_AUDIO_IN_FS_16KHZ | CELL_AUDIO_IN_FS_24KHZ | CELL_AUDIO_IN_FS_32KHZ | CELL_AUDIO_IN_FS_48KHZ;
+				device.info.deviceNumber              = curindex;
+				device.full_device_name               = mic_list[index];
+				strcpy_trunc(device.info.name, device.full_device_name);
 
+				devices.push_back(std::move(device));
 				curindex++;
 			}
 			break;
+		}
 		case microphone_handler::real_singstar:
 		case microphone_handler::singstar:
+		{
 			// Only one device for singstar device
-			devices.emplace_back();
-
-			devices[curindex].portType                  = CELL_AUDIO_IN_PORT_USB;
-			devices[curindex].availableModeCount        = 1;
-			devices[curindex].state                     = CELL_AUDIO_IN_DEVICE_STATE_AVAILABLE;
-			devices[curindex].deviceId                  = 0x00000001;
-			devices[curindex].type                      = 0x14150000;
-			devices[curindex].availableModes[0].type    = CELL_AUDIO_IN_CODING_TYPE_LPCM;
-			devices[curindex].availableModes[0].channel = CELL_AUDIO_IN_CHNUM_2;
-			devices[curindex].availableModes[0].fs      = CELL_AUDIO_IN_FS_8KHZ | CELL_AUDIO_IN_FS_12KHZ | CELL_AUDIO_IN_FS_16KHZ | CELL_AUDIO_IN_FS_24KHZ | CELL_AUDIO_IN_FS_32KHZ | CELL_AUDIO_IN_FS_48KHZ;
-			devices[curindex].deviceNumber              = curindex;
-			strcpy_trunc(devices[curindex].name, mic_list[0]);
+			device_info device {};
+			device.info.portType                  = CELL_AUDIO_IN_PORT_USB;
+			device.info.availableModeCount        = 1;
+			device.info.state                     = CELL_AUDIO_IN_DEVICE_STATE_AVAILABLE;
+			device.info.deviceId                  = 0x00000001;
+			device.info.type                      = 0x14150000;
+			device.info.availableModes[0].type    = CELL_AUDIO_IN_CODING_TYPE_LPCM;
+			device.info.availableModes[0].channel = CELL_AUDIO_IN_CHNUM_2;
+			device.info.availableModes[0].fs      = CELL_AUDIO_IN_FS_8KHZ | CELL_AUDIO_IN_FS_12KHZ | CELL_AUDIO_IN_FS_16KHZ | CELL_AUDIO_IN_FS_24KHZ | CELL_AUDIO_IN_FS_32KHZ | CELL_AUDIO_IN_FS_48KHZ;
+			device.info.deviceNumber              = curindex;
+			device.full_device_name               = mic_list[0];
+			strcpy_trunc(device.info.name, device.full_device_name);
 
+			devices.push_back(std::move(device));
 			curindex++;
 			break;
+		}
 		case microphone_handler::rocksmith:
-			devices.emplace_back();
-
-			devices[curindex].portType                  = CELL_AUDIO_IN_PORT_USB;
-			devices[curindex].availableModeCount        = 1;
-			devices[curindex].state                     = CELL_AUDIO_IN_DEVICE_STATE_AVAILABLE;
-			devices[curindex].deviceId                  = 0x12BA00FF; // Specific to rocksmith usb input
-			devices[curindex].type                      = 0xC0DE73C4;
-			devices[curindex].availableModes[0].type    = CELL_AUDIO_IN_CODING_TYPE_LPCM;
-			devices[curindex].availableModes[0].channel = CELL_AUDIO_IN_CHNUM_1;
-			devices[curindex].availableModes[0].fs      = CELL_AUDIO_IN_FS_8KHZ | CELL_AUDIO_IN_FS_12KHZ | CELL_AUDIO_IN_FS_16KHZ | CELL_AUDIO_IN_FS_24KHZ | CELL_AUDIO_IN_FS_32KHZ | CELL_AUDIO_IN_FS_48KHZ;
-			devices[curindex].deviceNumber              = curindex;
-			strcpy_trunc(devices[curindex].name, mic_list[0]);
+		{
+			device_info device {};
+			device.info.portType                  = CELL_AUDIO_IN_PORT_USB;
+			device.info.availableModeCount        = 1;
+			device.info.state                     = CELL_AUDIO_IN_DEVICE_STATE_AVAILABLE;
+			device.info.deviceId                  = 0x12BA00FF; // Specific to rocksmith usb input
+			device.info.type                      = 0xC0DE73C4;
+			device.info.availableModes[0].type    = CELL_AUDIO_IN_CODING_TYPE_LPCM;
+			device.info.availableModes[0].channel = CELL_AUDIO_IN_CHNUM_1;
+			device.info.availableModes[0].fs      = CELL_AUDIO_IN_FS_8KHZ | CELL_AUDIO_IN_FS_12KHZ | CELL_AUDIO_IN_FS_16KHZ | CELL_AUDIO_IN_FS_24KHZ | CELL_AUDIO_IN_FS_32KHZ | CELL_AUDIO_IN_FS_48KHZ;
+			device.info.deviceNumber              = curindex;
+			device.full_device_name               = mic_list[0];
+			strcpy_trunc(device.info.name, device.full_device_name);
 
+			devices.push_back(std::move(device));
 			curindex++;
 			break;
+		}
 		case microphone_handler::null:
-		default: break;
+		default:
+			break;
 		}
 	}
 
 	if (g_cfg.io.camera != camera_handler::null)
 	{
-		devices.emplace_back();
-
-		devices[curindex].portType                  = CELL_AUDIO_IN_PORT_USB;
-		devices[curindex].availableModeCount        = 1;
-		devices[curindex].state                     = CELL_AUDIO_IN_DEVICE_STATE_AVAILABLE;
-		devices[curindex].deviceId                  = 0xDEADBEEF;
-		devices[curindex].type                      = 0xBEEFDEAD;
-		devices[curindex].availableModes[0].type    = CELL_AUDIO_IN_CODING_TYPE_LPCM;
-		devices[curindex].availableModes[0].channel = CELL_AUDIO_IN_CHNUM_NONE;
-		devices[curindex].availableModes[0].fs      = CELL_AUDIO_IN_FS_8KHZ | CELL_AUDIO_IN_FS_12KHZ | CELL_AUDIO_IN_FS_16KHZ | CELL_AUDIO_IN_FS_24KHZ | CELL_AUDIO_IN_FS_32KHZ | CELL_AUDIO_IN_FS_48KHZ;
-		devices[curindex].deviceNumber              = curindex;
-		strcpy_trunc(devices[curindex].name, "USB Camera");
+		device_info device {};
+		device.info.portType                  = CELL_AUDIO_IN_PORT_USB;
+		device.info.availableModeCount        = 1;
+		device.info.state                     = CELL_AUDIO_IN_DEVICE_STATE_AVAILABLE;
+		device.info.deviceId                  = 0xDEADBEEF;
+		device.info.type                      = 0xBEEFDEAD;
+		device.info.availableModes[0].type    = CELL_AUDIO_IN_CODING_TYPE_LPCM;
+		device.info.availableModes[0].channel = CELL_AUDIO_IN_CHNUM_NONE;
+		device.info.availableModes[0].fs      = CELL_AUDIO_IN_FS_8KHZ | CELL_AUDIO_IN_FS_12KHZ | CELL_AUDIO_IN_FS_16KHZ | CELL_AUDIO_IN_FS_24KHZ | CELL_AUDIO_IN_FS_32KHZ | CELL_AUDIO_IN_FS_48KHZ;
+		device.info.deviceNumber              = curindex;
+		device.full_device_name               = "USB Camera";
+		strcpy_trunc(device.info.name, device.full_device_name);
 
+		devices.push_back(std::move(device));
 		curindex++;
 	}
 }
@@ -142,14 +159,14 @@ void avconf_manager::copy_device_info(u32 num, vm::ptr<CellAudioInDeviceInfo> in
 {
 	memset(info.get_ptr(), 0, sizeof(CellAudioInDeviceInfo));
 	ensure(num < devices.size());
-	*info = devices[num];
+	*info = devices[num].info;
 }
 
-std::optional<CellAudioInDeviceInfo> avconf_manager::get_device_info(vm::cptr<char> name) const
+std::optional<avconf_manager::device_info> avconf_manager::get_device_info(vm::cptr<char> name) const
 {
-	for (const CellAudioInDeviceInfo& device : devices)
+	for (const device_info& device : devices)
 	{
-		if (strncmp(device.name, name.get_ptr(), sizeof(device.name)) == 0)
+		if (strncmp(device.info.name, name.get_ptr(), sizeof(device.info.name)) == 0)
 		{
 			return device;
 		}
@@ -220,17 +237,57 @@ error_code cellAudioInGetDeviceInfo(u32 deviceNumber, u32 deviceIndex, vm::ptr<C
 	return CELL_OK;
 }
 
+template <bool Is_Float, bool Range_Limited>
+void convert_cursor_color(const u8* src, u8* dst, s32 num, f32 gamma)
+{
+	for (s32 i = 0; i < num; i++, src += 4, dst += 4)
+	{
+		for (s32 c = 1; c < 4; c++)
+		{
+			if constexpr (Is_Float)
+			{
+				if constexpr (Range_Limited)
+				{
+					const f32 val = (src[c] / 255.0f) * 219.0f + 16.0f;
+					dst[c] = static_cast<u8>(val + 0.5f);
+				}
+				else
+				{
+					dst[c] = src[c];
+				}
+			}
+			else
+			{
+				f32 val = std::clamp(std::pow(src[c] / 255.0f, gamma), 0.0f, 1.0f);
+
+				if constexpr (Range_Limited)
+				{
+					val = val * 219.0f + 16.0f;
+				}
+				else
+				{
+					val *= 255.0f;
+				}
+
+				dst[c] = static_cast<u8>(val + 0.5f);
+			}
+		}
+	}
+}
+
 error_code cellVideoOutConvertCursorColor(u32 videoOut, s32 displaybuffer_format, f32 gamma, s32 source_buffer_format, vm::ptr<void> src_addr, vm::ptr<u32> dest_addr, s32 num)
 {
-	cellAvconfExt.todo("cellVideoOutConvertCursorColor(videoOut=%d, displaybuffer_format=0x%x, gamma=0x%x, source_buffer_format=0x%x, src_addr=*0x%x, dest_addr=*0x%x, num=0x%x)", videoOut,
+	cellAvconfExt.warning("cellVideoOutConvertCursorColor(videoOut=%d, displaybuffer_format=0x%x, gamma=%f, source_buffer_format=0x%x, src_addr=*0x%x, dest_addr=*0x%x, num=0x%x)", videoOut,
 			displaybuffer_format, gamma, source_buffer_format, src_addr, dest_addr, num);
 
-	if (!dest_addr || num == 0)
+	if (!src_addr || !dest_addr)
 	{
 		return CELL_VIDEO_OUT_ERROR_ILLEGAL_PARAMETER;
 	}
 
-	if (displaybuffer_format > CELL_VIDEO_OUT_BUFFER_COLOR_FORMAT_R16G16B16X16_FLOAT || src_addr)
+	if (displaybuffer_format < 0 ||
+		displaybuffer_format > CELL_VIDEO_OUT_BUFFER_COLOR_FORMAT_R16G16B16X16_FLOAT ||
+		source_buffer_format != CELL_VIDEO_OUT_BUFFER_COLOR_FORMAT_X8R8G8B8)
 	{
 		return CELL_VIDEO_OUT_ERROR_PARAMETER_OUT_OF_RANGE;
 	}
@@ -251,6 +308,32 @@ error_code cellVideoOutConvertCursorColor(u32 videoOut, s32 displaybuffer_format
 		return error;
 	}
 
+	const u8* src = reinterpret_cast<const u8*>(src_addr.get_ptr());
+	u8* dst = reinterpret_cast<u8*>(dest_addr.get_ptr());
+
+	if (displaybuffer_format == CELL_VIDEO_OUT_BUFFER_COLOR_FORMAT_R16G16B16X16_FLOAT)
+	{
+		if (*rgbOutputRange == CELL_VIDEO_OUT_RGB_OUTPUT_RANGE_LIMITED)
+		{
+			convert_cursor_color<true, true>(src, dst, num, gamma);
+		}
+		else
+		{
+			convert_cursor_color<true, false>(src, dst, num, gamma);
+		}
+	}
+	else
+	{
+		if (*rgbOutputRange == CELL_VIDEO_OUT_RGB_OUTPUT_RANGE_LIMITED)
+		{
+			convert_cursor_color<false, true>(src, dst, num, gamma);
+		}
+		else
+		{
+			convert_cursor_color<false, false>(src, dst, num, gamma);
+		}
+	}
+
 	return CELL_OK;
 }
 
@@ -398,8 +481,8 @@ error_code cellAudioInRegisterDevice(u64 deviceType, vm::cptr<char> name, vm::pt
 	auto& av_manager = g_fxo->get<avconf_manager>();
 	const std::lock_guard lock(av_manager.mutex);
 
-	std::optional<CellAudioInDeviceInfo> info = av_manager.get_device_info(name);
-	if (!info || !memchr(info->name, '\0', sizeof(info->name)))
+	std::optional<avconf_manager::device_info> device = av_manager.get_device_info(name);
+	if (!device)
 	{
 		// TODO
 		return CELL_AUDIO_IN_ERROR_DEVICE_NOT_FOUND;
@@ -407,7 +490,7 @@ error_code cellAudioInRegisterDevice(u64 deviceType, vm::cptr<char> name, vm::pt
 
 	auto& mic_thr = g_fxo->get<mic_thread>();
 	const std::lock_guard mic_lock(mic_thr.mutex);
-	const u32 device_number = mic_thr.register_device(info->name);
+	const u32 device_number = mic_thr.register_device(device->full_device_name);
 
 	return not_an_error(device_number);
 }

rpcs3/Emu/Cell/Modules/cellCamera.cpp

@@ -61,11 +61,6 @@ void fmt_class_string<CellCameraFormat>::format(std::string& out, u64 arg)
 	});
 }
 
-// Temporarily
-#ifndef _MSC_VER
-#pragma GCC diagnostic ignored "-Wunused-parameter"
-#endif
-
 // **************
 // * Prototypes *
 // **************
@@ -402,7 +397,7 @@ error_code check_init_and_open(s32 dev_num)
 }
 
 // This represents a recurring subfunction throughout libCamera
-error_code check_resolution(s32 dev_num)
+error_code check_resolution(s32 /*dev_num*/)
 {
 	// TODO: Some sort of connection check maybe?
 	//if (error == CELL_CAMERA_ERROR_RESOLUTION_UNKNOWN)
@@ -413,7 +408,7 @@ error_code check_resolution(s32 dev_num)
 	return CELL_OK;
 }
 
-// This represents a oftenly used sequence in libCamera (usually the beginning of a subfunction).
+// This represents an often used sequence in libCamera (usually the beginning of a subfunction).
 // There also exist common sequences for mutex lock/unlock by the way.
 error_code check_resolution_ex(s32 dev_num)
 {

rpcs3/Emu/Cell/Modules/cellCrossController.cpp

@@ -107,13 +107,8 @@ struct cross_controller
 
 	void stop_thread()
 	{
-		if (connection_thread)
-		{
-			auto& thread = *connection_thread;
-			thread = thread_state::aborting;
-			thread();
-			connection_thread.reset();
-		}
+		// Join thread
+		connection_thread.reset();
 	};
 };
 

rpcs3/Emu/Cell/Modules/cellDaisy.cpp

@@ -26,11 +26,6 @@ void fmt_class_string<CellDaisyError>::format(std::string& out, u64 arg)
 	});
 }
 
-// Temporarily
-#ifndef _MSC_VER
-#pragma GCC diagnostic ignored "-Wunused-parameter"
-#endif
-
 using LFQueue2 = struct CellDaisyLFQueue2;
 using Lock = struct CellDaisyLock;
 using ScatterGatherInterlock = struct CellDaisyScatterGatherInterlock;
@@ -38,134 +33,134 @@ using AtomicInterlock = volatile struct CellDaisyAtomicInterlock;
 
 error_code cellDaisyLFQueue2GetPopPointer(vm::ptr<LFQueue2> queue, vm::ptr<s32> pPointer, u32 isBlocking)
 {
-	cellDaisy.todo("cellDaisyLFQueue2GetPopPointer()");
+	cellDaisy.todo("cellDaisyLFQueue2GetPopPointer(queue=*0x%x, pPointer=*0x%x, isBlocking=%d)", queue, pPointer, isBlocking);
 	return CELL_OK;
 }
 
 error_code cellDaisyLFQueue2CompletePopPointer(vm::ptr<LFQueue2> queue, s32 pointer, vm::ptr<s32(vm::ptr<void>, u32)> fpSendSignal, u32 isQueueFull)
 {
-	cellDaisy.todo("cellDaisyLFQueue2CompletePopPointer()");
+	cellDaisy.todo("cellDaisyLFQueue2CompletePopPointer(queue=*0x%x, pointer=0x%x, fpSendSignal=*0x%x, isQueueFull=%d)", queue, pointer, fpSendSignal, isQueueFull);
 	return CELL_OK;
 }
 
 void cellDaisyLFQueue2PushOpen(vm::ptr<LFQueue2> queue)
 {
-	cellDaisy.todo("cellDaisyLFQueue2PushOpen()");
+	cellDaisy.todo("cellDaisyLFQueue2PushOpen(queue=*0x%x)", queue);
 }
 
 error_code cellDaisyLFQueue2PushClose(vm::ptr<LFQueue2> queue, vm::ptr<s32(vm::ptr<void>, u32)> fpSendSignal)
 {
-	cellDaisy.todo("cellDaisyLFQueue2PushClose()");
+	cellDaisy.todo("cellDaisyLFQueue2PushClose(queue=*0x%x, fpSendSignal=*0x%x)", queue, fpSendSignal);
 	return CELL_OK;
 }
 
 void cellDaisyLFQueue2PopOpen(vm::ptr<LFQueue2> queue)
 {
-	cellDaisy.todo("cellDaisyLFQueue2PopOpen()");
+	cellDaisy.todo("cellDaisyLFQueue2PopOpen(queue=*0x%x)", queue);
 }
 
 error_code cellDaisyLFQueue2PopClose(vm::ptr<LFQueue2> queue, vm::ptr<s32(vm::ptr<void>, u32)> fpSendSignal)
 {
-	cellDaisy.todo("cellDaisyLFQueue2PopClose()");
+	cellDaisy.todo("cellDaisyLFQueue2PopClose(queue=*0x%x, fpSendSignal=*0x%x)", queue, fpSendSignal);
 	return CELL_OK;
 }
 
 error_code cellDaisyLFQueue2HasUnfinishedConsumer(vm::ptr<LFQueue2> queue, u32 isCancelled)
 {
-	cellDaisy.todo("cellDaisyLFQueue2HasUnfinishedConsumer()");
+	cellDaisy.todo("cellDaisyLFQueue2HasUnfinishedConsumer(queue=*0x%x, isCancelled=%d)", queue, isCancelled);
 	return CELL_OK;
 }
 
 error_code cellDaisy_snprintf(vm::ptr<char> buffer, u32 count, vm::cptr<char> fmt, ppu_va_args_t fmt_args)
 {
-	cellDaisy.todo("cellDaisy_snprintf()");
+	cellDaisy.todo("cellDaisy_snprintf(buffer=*0x%x, count=%d, fmt=*0x%x, fmt_args=%d)", buffer, count, fmt, fmt_args.count);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_initialize(vm::ptr<Lock> _this, u32 depth)
 {
-	cellDaisy.todo("cellDaisyLock_initialize()");
+	cellDaisy.todo("cellDaisyLock_initialize(_this=*0x%x, depth=%d)", _this, depth);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_getNextHeadPointer(vm::ptr<Lock> _this)
 {
-	cellDaisy.todo("cellDaisyLock_getNextHeadPointer()");
+	cellDaisy.todo("cellDaisyLock_getNextHeadPointer(_this=*0x%x)", _this);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_getNextTailPointer(vm::ptr<Lock> _this)
 {
-	cellDaisy.todo("cellDaisyLock_getNextTailPointer()");
+	cellDaisy.todo("cellDaisyLock_getNextTailPointer(_this=*0x%x)", _this);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_completeConsume(vm::ptr<Lock> _this, u32 pointer)
 {
-	cellDaisy.todo("cellDaisyLock_completeConsume()");
+	cellDaisy.todo("cellDaisyLock_completeConsume(_this=*0x%x, pointer=0x%x)", _this, pointer);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_completeProduce(vm::ptr<Lock> _this, u32 pointer)
 {
-	cellDaisy.todo("cellDaisyLock_completeProduce()");
+	cellDaisy.todo("cellDaisyLock_completeProduce(_this=*0x%x, pointer=0x%x)", _this, pointer);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_pushOpen(vm::ptr<Lock> _this)
 {
-	cellDaisy.todo("cellDaisyLock_pushOpen()");
+	cellDaisy.todo("cellDaisyLock_pushOpen(_this=*0x%x)", _this);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_pushClose(vm::ptr<Lock> _this)
 {
-	cellDaisy.todo("cellDaisyLock_pushClose()");
+	cellDaisy.todo("cellDaisyLock_pushClose(_this=*0x%x)", _this);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_popOpen(vm::ptr<Lock> _this)
 {
-	cellDaisy.todo("cellDaisyLock_popOpen()");
+	cellDaisy.todo("cellDaisyLock_popOpen(_this=*0x%x)", _this);
 	return CELL_OK;
 }
 
 error_code cellDaisyLock_popClose(vm::ptr<Lock> _this)
 {
-	cellDaisy.todo("cellDaisyLock_popClose()");
+	cellDaisy.todo("cellDaisyLock_popClose(_this=*0x%x)", _this);
 	return CELL_OK;
 }
 
 void cellDaisyScatterGatherInterlock_1(vm::ptr<ScatterGatherInterlock> _this, vm::ptr<AtomicInterlock> ea, u32 size, vm::ptr<void> eaSignal, vm::ptr<s32(vm::ptr<void>, u32)> fpSendSignal)
 {
-	cellDaisy.todo("cellDaisyScatterGatherInterlock_1()");
+	cellDaisy.todo("cellDaisyScatterGatherInterlock_1(_this=*0x%x, ea=*0x%x, size=%d, eaSignal=*0x%x, fpSendSignal=*0x%x)", _this, ea, size, eaSignal, fpSendSignal);
 }
 
 void cellDaisyScatterGatherInterlock_2(vm::ptr<ScatterGatherInterlock> _this, u32 size, vm::ptr<u32> ids, u32 numSpus, u8 spup)
 {
-	cellDaisy.todo("cellDaisyScatterGatherInterlock_2()");
+	cellDaisy.todo("cellDaisyScatterGatherInterlock_2(_this=*0x%x, size=%d, ids=*0x%x, numSpus=%d, spup=%d)", _this, size, ids, numSpus, spup);
 }
 
 void cellDaisyScatterGatherInterlock_9tor(vm::ptr<ScatterGatherInterlock> _this)
 {
-	cellDaisy.todo("cellDaisyScatterGatherInterlock_9tor()");
+	cellDaisy.todo("cellDaisyScatterGatherInterlock_9tor(_this=*0x%x)", _this);
 }
 
 error_code cellDaisyScatterGatherInterlock_probe(vm::ptr<ScatterGatherInterlock> _this, u32 isBlocking)
 {
-	cellDaisy.todo("cellDaisyScatterGatherInterlock_probe()");
+	cellDaisy.todo("cellDaisyScatterGatherInterlock_probe(_this=*0x%x, isBlocking=%d)", _this, isBlocking);
 	return CELL_OK;
 }
 
 error_code cellDaisyScatterGatherInterlock_release(vm::ptr<ScatterGatherInterlock> _this)
 {
-	cellDaisy.todo("cellDaisyScatterGatherInterlock_release()");
+	cellDaisy.todo("cellDaisyScatterGatherInterlock_release(_this=*0x%x)", _this);
 	return CELL_OK;
 }
 
 void cellDaisyScatterGatherInterlock_proceedSequenceNumber(vm::ptr<ScatterGatherInterlock> _this)
 {
-	cellDaisy.todo("cellDaisyScatterGatherInterlock_proceedSequenceNumber()");
+	cellDaisy.todo("cellDaisyScatterGatherInterlock_proceedSequenceNumber(_this=*0x%x)", _this);
 }