rpcs3/rpcs3/Emu/Io/GunCon3.cpp

#include "stdafx.h"
#include "GunCon3.h"
#include "MouseHandler.h"
#include "Emu/IdManager.h"
#include "Emu/Cell/lv2/sys_usbd.h"
#include "Emu/system_config.h"
#include "Input/pad_thread.h"

LOG_CHANNEL(guncon3_log);

static const u8 KEY_TABLE[] = {
	0x91, 0xFD, 0x4C, 0x8B, 0x20, 0xC1, 0x7C, 0x09, 0x58, 0x14, 0xF6, 0x00, 0x52, 0x55, 0xBF, 0x41,
	0x75, 0xC0, 0x13, 0x30, 0xB5, 0xD0, 0x69, 0x85, 0x89, 0xBB, 0xD6, 0x88, 0xBC, 0x73, 0x18, 0x8D,
	0x58, 0xAB, 0x3D, 0x98, 0x5C, 0xF2, 0x48, 0xE9, 0xAC, 0x9F, 0x7A, 0x0C, 0x7C, 0x25, 0xD8, 0xFF,
	0xDC, 0x7D, 0x08, 0xDB, 0xBC, 0x18, 0x8C, 0x1D, 0xD6, 0x3C, 0x35, 0xE1, 0x2C, 0x14, 0x8E, 0x64,
	0x83, 0x39, 0xB0, 0xE4, 0x4E, 0xF7, 0x51, 0x7B, 0xA8, 0x13, 0xAC, 0xE9, 0x43, 0xC0, 0x08, 0x25,
	0x0E, 0x15, 0xC4, 0x20, 0x93, 0x13, 0xF5, 0xC3, 0x48, 0xCC, 0x47, 0x1C, 0xC5, 0x20, 0xDE, 0x60,
	0x55, 0xEE, 0xA0, 0x40, 0xB4, 0xE7, 0x74, 0x95, 0xB0, 0x46, 0xEC, 0xF0, 0xA5, 0xB8, 0x23, 0xC8,
	0x04, 0x06, 0xFC, 0x28, 0xCB, 0xF8, 0x17, 0x2C, 0x25, 0x1C, 0xCB, 0x18, 0xE3, 0x6C, 0x80, 0x85,
	0xDD, 0x7E, 0x09, 0xD9, 0xBC, 0x19, 0x8F, 0x1D, 0xD4, 0x3D, 0x37, 0xE1, 0x2F, 0x15, 0x8D, 0x64,
	0x06, 0x04, 0xFD, 0x29, 0xCF, 0xFA, 0x14, 0x2E, 0x25, 0x1F, 0xC9, 0x18, 0xE3, 0x6D, 0x81, 0x84,
	0x80, 0x3B, 0xB1, 0xE5, 0x4D, 0xF7, 0x51, 0x78, 0xA9, 0x13, 0xAD, 0xE9, 0x80, 0xC1, 0x0B, 0x25,
	0x93, 0xFC, 0x4D, 0x89, 0x23, 0xC2, 0x7C, 0x0B, 0x59, 0x15, 0xF6, 0x01, 0x50, 0x55, 0xBF, 0x81,
	0x75, 0xC3, 0x10, 0x31, 0xB5, 0xD3, 0x69, 0x84, 0x89, 0xBA, 0xD6, 0x89, 0xBD, 0x70, 0x19, 0x8E,
	0x58, 0xA8, 0x3D, 0x9B, 0x5D, 0xF0, 0x49, 0xE8, 0xAD, 0x9D, 0x7A, 0x0D, 0x7E, 0x24, 0xDA, 0xFC,
	0x0D, 0x14, 0xC5, 0x23, 0x91, 0x11, 0xF5, 0xC0, 0x4B, 0xCD, 0x44, 0x1C, 0xC5, 0x21, 0xDF, 0x61,
	0x54, 0xED, 0xA2, 0x81, 0xB7, 0xE5, 0x74, 0x94, 0xB0, 0x47, 0xEE, 0xF1, 0xA5, 0xBB, 0x21, 0xC8
};

#pragma pack(push, 1)
struct GunCon3_data
{
	uint8_t : 1;
	uint8_t btn_a2 : 1;
	uint8_t btn_a1 : 1;
	uint8_t btn_c2 : 1;
	uint8_t : 4;

	uint8_t : 1;
	uint8_t btn_b2 : 1;
	uint8_t btn_b1 : 1;
	uint8_t : 2;
	uint8_t btn_trigger : 1;
	uint8_t : 1;
	uint8_t btn_c1 : 1;

	uint8_t : 6;
	uint8_t btn_b3 : 1;
	uint8_t btn_a3 : 1;

	int16_t gun_x;
	int16_t gun_y;
	int16_t gun_z;
	uint8_t stick_bx;
	uint8_t stick_by;
	uint8_t stick_ax;
	uint8_t stick_ay;

	uint8_t checksum;
	uint8_t keyindex;
};
#pragma pack(pop)

static void guncon3_encode(const GunCon3_data* gc, u8* data, const u8* key)
{
	std::memcpy(data, gc, sizeof(GunCon3_data));

	u8 key_offset = ((key[1] ^ key[2]) - key[3] - key[4] ^ key[5]) + key[6] - key[7] ^ data[14];
	u8 key_index = 0;

	for (int i = 0; i < 13; i++)
	{
		u8 byte = data[i];
		for (int j = 0; j < 3; j++)
		{
			u8 bkey = KEY_TABLE[key_offset];
			u8 keyr = key[++key_index];
			if (key_index == 7)
				key_index = 0;

			if ((bkey & 3) == 0)
				byte = (byte + bkey) + keyr;
			else if ((bkey & 3) == 1)
				byte = (byte - bkey) - keyr;
			else
				byte = (byte ^ bkey) ^ keyr;

			key_offset++;
		}
		data[i] = byte;
	}

	data[13] = ((key[7] + data[0] - data[1] - data[2] ^ data[3])
			 + data[4] + data[5] ^ data[6] ^ data[7])
			 + data[8] + data[9] - data[10] - data[11] ^ data[12];
}

usb_device_guncon3::usb_device_guncon3(u32 controller_index, const std::array<u8, 7>& location)
	: usb_device_emulated(location)
	, m_controller_index(controller_index)
{
	device = UsbDescriptorNode(USB_DESCRIPTOR_DEVICE,
		UsbDeviceDescriptor {
			.bcdUSB             = 0x0110,
			.bDeviceClass       = 0x00,
			.bDeviceSubClass    = 0x00,
			.bDeviceProtocol    = 0x00,
			.bMaxPacketSize0    = 0x08,
			.idVendor           = 0x0b9a,
			.idProduct          = 0x0800,
			.bcdDevice          = 0x8000,
			.iManufacturer      = 0x00,
			.iProduct           = 0x00,
			.iSerialNumber      = 0x00,
			.bNumConfigurations = 0x01});
	auto& config0 = device.add_node(UsbDescriptorNode(USB_DESCRIPTOR_CONFIG,
		UsbDeviceConfiguration {
			.wTotalLength        = 0x0020,
			.bNumInterfaces      = 0x01,
			.bConfigurationValue = 0x01,
			.iConfiguration      = 0x00,
			.bmAttributes        = 0x00,
			.bMaxPower           = 0x32}));
	config0.add_node(UsbDescriptorNode(USB_DESCRIPTOR_INTERFACE,
		UsbDeviceInterface {
			.bInterfaceNumber   = 0x00,
			.bAlternateSetting  = 0x00,
			.bNumEndpoints      = 0x02,
			.bInterfaceClass    = 0xff,
			.bInterfaceSubClass = 0x00,
			.bInterfaceProtocol = 0x00,
			.iInterface         = 0x00}));
	config0.add_node(UsbDescriptorNode(USB_DESCRIPTOR_ENDPOINT,
		UsbDeviceEndpoint {
			.bEndpointAddress = 0x02,
			.bmAttributes     = 0x03,
			.wMaxPacketSize   = 0x0008,
			.bInterval        = 0x10}));
	config0.add_node(UsbDescriptorNode(USB_DESCRIPTOR_ENDPOINT,
		UsbDeviceEndpoint {
			.bEndpointAddress = 0x82,
			.bmAttributes     = 0x03,
			.wMaxPacketSize   = 0x000f,
			.bInterval        = 0x04}));
}

usb_device_guncon3::~usb_device_guncon3()
{
}

void usb_device_guncon3::control_transfer(u8 bmRequestType, u8 bRequest, u16 wValue, u16 wIndex, u16 wLength, u32 buf_size, u8* buf, UsbTransfer* transfer)
{
	transfer->fake            = true;
	transfer->expected_count  = buf_size;
	transfer->expected_result = HC_CC_NOERR;
	transfer->expected_time   = get_timestamp() + 100;

	usb_device_emulated::control_transfer(bmRequestType, bRequest, wValue, wIndex, wLength, buf_size, buf, transfer);
}

extern bool is_input_allowed();

void usb_device_guncon3::interrupt_transfer(u32 buf_size, u8* buf, u32 endpoint, UsbTransfer* transfer)
{
	transfer->fake = true;
	transfer->expected_count = buf_size;
	transfer->expected_result = HC_CC_NOERR;
	transfer->expected_time = get_timestamp() + 500;

	if ((endpoint & 0x80) == LIBUSB_ENDPOINT_OUT)
	{
		std::memcpy(m_key, buf, std::min(buf_size, static_cast<u32>(sizeof(m_key))));
		return;
	}
	// else ENDPOINT_IN

	ensure(buf_size >= sizeof(GunCon3_data));

	GunCon3_data gc{};
	gc.stick_ax = gc.stick_ay = gc.stick_bx = gc.stick_by = 0x7f;

	if (!is_input_allowed())
	{
		guncon3_encode(&gc, buf, m_key);
		return;
	}

	if (g_cfg.io.mouse == mouse_handler::null)
	{
		guncon3_log.warning("GunCon3 requires a Mouse Handler enabled");
		guncon3_encode(&gc, buf, m_key);
		return;
	}

	{
		std::lock_guard lock(pad::g_pad_mutex);
		const auto gamepad_handler = pad::get_current_handler();
		const auto& pads = gamepad_handler->GetPads();

		const auto& pad = ::at32(pads, m_controller_index);
		if (pad->m_port_status & CELL_PAD_STATUS_CONNECTED)
		{
			for (const Button& button : pad->m_buttons)
			{
				if (!button.m_pressed)
				{
					continue;
				}

				if (button.m_offset == CELL_PAD_BTN_OFFSET_DIGITAL1)
				{
					switch (button.m_outKeyCode)
					{
					case CELL_PAD_CTRL_L3:
						gc.btn_a3 |= 1;
						break;
					case CELL_PAD_CTRL_R3:
						gc.btn_b3 |= 1;
						break;
					case CELL_PAD_CTRL_SELECT:
						gc.btn_c1 |= 1;
						break;
					case CELL_PAD_CTRL_START:
						gc.btn_c2 |= 1;
						break;
					default:
						break;
					}
				}
				else if (button.m_offset == CELL_PAD_BTN_OFFSET_DIGITAL2)
				{
					switch (button.m_outKeyCode)
					{
					case CELL_PAD_CTRL_CROSS:
						gc.btn_trigger |= 1;
						break;
					case CELL_PAD_CTRL_L1:
						gc.btn_a1 |= 1;
						break;
					case CELL_PAD_CTRL_L2:
						gc.btn_a2 |= 1;
						break;
					case CELL_PAD_CTRL_R1:
						gc.btn_b1 |= 1;
						break;
					case CELL_PAD_CTRL_R2:
						gc.btn_b2 |= 1;
						break;
					default:
						break;
					}
				}
			}

			for (const AnalogStick& stick : pad->m_sticks)
			{
				switch (stick.m_offset)
				{
				case CELL_PAD_BTN_OFFSET_ANALOG_LEFT_X:
					gc.stick_ax = static_cast<uint8_t>(stick.m_value);
					break;
				case CELL_PAD_BTN_OFFSET_ANALOG_LEFT_Y:
					gc.stick_ay = static_cast<uint8_t>(stick.m_value);
					break;
				case CELL_PAD_BTN_OFFSET_ANALOG_RIGHT_X:
					gc.stick_bx = static_cast<uint8_t>(stick.m_value);
					break;
				case CELL_PAD_BTN_OFFSET_ANALOG_RIGHT_Y:
					gc.stick_by = static_cast<uint8_t>(stick.m_value);
					break;
				default:
					break;
				}
			}
		}
	}

	{
		auto& mouse_handler = g_fxo->get<MouseHandlerBase>();
		std::lock_guard mouse_lock(mouse_handler.mutex);

		mouse_handler.Init(2);

		if (m_controller_index >= mouse_handler.GetMice().size())
		{
			guncon3_encode(&gc, buf, m_key);
			return;
		}

		const Mouse& mouse_data = ::at32(mouse_handler.GetMice(), m_controller_index);
		if (mouse_data.x_max <= 0 || mouse_data.y_max <= 0)
		{
			guncon3_encode(&gc, buf, m_key);
			return;
		}

		// Expand 0..+wh to -32767..+32767
		gc.gun_x = (mouse_data.x_pos * USHRT_MAX / mouse_data.x_max) - SHRT_MAX;
		gc.gun_y = (mouse_data.y_pos * -USHRT_MAX / mouse_data.y_max) + SHRT_MAX;

		gc.btn_trigger |= !!(mouse_data.buttons & CELL_MOUSE_BUTTON_1);
	}

	guncon3_encode(&gc, buf, m_key);
}